Commit Graph

378 Commits

Author SHA1 Message Date
whitequark de17908b38 Revert "Globally update UART baudrate to 921600."
This reverts commit b29e2d5bfe.

This broke flterm firmware upload, which was the entire point
of the whole exercise.
2017-01-25 00:31:28 +00:00
whitequark b29e2d5bfe Globally update UART baudrate to 921600. 2017-01-24 22:25:58 +00:00
whitequark e5085c063f doc: test mode was removed, clean up. 2017-01-24 22:25:21 +00:00
Sebastien Bourdeauducq b4f3be7e1b doc: fix table formatting problem, add 'string constant' as supported compiler type 2017-01-16 13:58:09 -06:00
Sebastien Bourdeauducq c2bddd62e1 doc: fix llvmlite installation instructions 2017-01-05 19:10:12 +01:00
Sebastien Bourdeauducq fe53bab953 targets: kc705 -> kc705_dds 2017-01-05 18:40:56 +01:00
Sebastien Bourdeauducq 52fda27cb5 update copyright year 2017-01-04 11:29:10 +01:00
Sebastien Bourdeauducq a3041fb23f manual: fix Rust installation instructions 2017-01-01 16:56:01 +01:00
whitequark c45a170bb4 firmware: update for Rust 1.16.0. 2016-12-26 17:20:29 +00:00
jboulder baac555f96 add device for Korad KA3005P programmable DC power supply 2016-12-19 09:31:21 +01:00
Robert Jördens c63fa46430 Merge branch 'phaser2'
* phaser2: (157 commits)
  sawg/hbf: tweak pipeline for timing
  fir: register multiplier output
  conda/phaser: build-depend on numpy
  sawg: reduce coefficient width
  sawg: fix latency
  test/fir: needs mpl. don't run by default
  test/sawg: patch spline
  sawg: use ParallelHBFCascade to AA [WIP]
  fir: add ParallelHBFCascade
  fir: add ParallelFIR and test
  gateware/dsp: add FIR and test
  README_PHASER: update
  sawg: documentation
  sawg: extract spline
  sawg: document
  sawg: demo_2tone
  sawg: round to int64
  gateware/phaser -> gateware/ad9154_fmc_ebz
  phaser: fix typo
  sawg: merge set/set64
  ...
2016-12-12 17:31:39 +01:00
Sebastien Bourdeauducq 5accb7a0ac manual: add missing quote 2016-12-09 14:16:32 +08:00
Robert Jördens 5efd0fcea5 sawg: documentation 2016-12-06 19:25:40 +01:00
Sebastien Bourdeauducq 35200387b5 manual: precisions about TTL sampling 2016-12-03 11:24:40 +08:00
Robert Jördens d5d17aca9e Merge remote-tracking branch 'm-labs/master' into phaser2
* m-labs/master:
  applets: compatibility with older Qt. Closes #629
  doc: update LLVM configure command (fixes #628).
  runtime: match argument signedness between ARTIQ Python and ksupport.
  runtime: refactor rtio_output_list.
  runtime: use correct ABI when accepting ARTIQ lists.
2016-11-29 14:49:30 +01:00
whitequark 2ec6d43441 doc: update LLVM configure command (fixes #628). 2016-11-26 07:26:06 +00:00
Robert Jördens f7e8961ab0 Merge branch 'master' into phaser
* master: (23 commits)
  RELEASE_NOTES: update
  pipistrello: add some inputs
  Remove last vestiges of nist_qc1.
  Fully drop AD9858 and kc705-nist_qc1 support (closes #576).
  coredevice.dds: reimplement fully in ARTIQ Python.
  compiler: unbreak casts to int32/int64.
  analyses.constness: fix false positive on x[...].
  inferencer: significantly improve the op-assignment diagnostic.
  Fix tests.
  Move mu_to_seconds, seconds_to_mu to Core.
  artiq_devtool: don't crash on invalid utf-8.
  artiq_devtool: detect a race condition during connect.
  llvm_ir_generator: handle no-op coercions.
  conda: use development version of migen/misoc
  Revert accidentally committed code.
  Revert "gateware: increase RTIO FIFO sizes for NIST_CLOCK. Closes #623"
  analyses.invariant_detection: implement (#622).
  Fix whitespace.
  coredevice.dds: work around the round(numpy.float64()) snafu.
  coredevice.dds: update from obsolete int(width=) syntax (fixes #621).
  ...
2016-11-21 17:29:39 +01:00
Sebastien Bourdeauducq 93c310dfa5 pipistrello: add some inputs 2016-11-21 23:43:41 +08:00
whitequark 6aa5d9f6c6 Remove last vestiges of nist_qc1. 2016-11-21 15:36:22 +00:00
whitequark 5e8888d5f3 Fully drop AD9858 and kc705-nist_qc1 support (closes #576). 2016-11-21 15:14:17 +00:00
whitequark 009d396740 Move mu_to_seconds, seconds_to_mu to Core. 2016-11-21 05:37:30 +00:00
whitequark abf2b32b20 coredevice.dds: work around the round(numpy.float64()) snafu. 2016-11-20 09:49:58 +00:00
whitequark 2015fe9de0 doc: update installing_from_source for LLVM 3.9 transitionl 2016-11-18 10:35:36 +00:00
Robert Jördens aedb6747f2 Merge branch 'master' into phaser
* master: (47 commits)
  runtime: disable the Nagle algorithm entirely.
  runtime: buffer RPC send packets.
  runtime: don't print debug messages to the UART.
  runtime: print microsecond timestamps in debug messages.
  artiq_devtool: abort if build failed.
  conda: bump llvmlite-artiq dep.
  conda: bump llvmlite-artiq dep.
  llvm_ir_generator: use !{→unconditionally.}invariant.load metadata.
  artiq_devtool: more robust port forwarding.
  setup: remove paramiko dependency (optional and developer-only)
  artiq_devtool: implement.
  artiq_compile: actually disable attribute writeback.
  conda: use pythonparser 1.0.
  conda: tighten pythonparser dependency (fixes #600).
  doc: clarify kernel_invariant doc (fixes #609).
  compiler: Emit all-kernel_invariant objects as LLVM constants
  conda: update for LLVM 3.9.
  add has_dds, use config flags
  Revert "Revert "Revert "Revert "Update for LLVM 3.9.""""
  Revert "Revert "Revert "Update for LLVM 3.9."""
  ...
2016-11-13 16:54:28 +01:00
whitequark eee8d05398 doc: clarify kernel_invariant doc (fixes #609). 2016-11-09 14:59:57 +00:00
whitequark f102f2d4e6 manual: fix rustc invocation. 2016-11-04 09:11:45 +00:00
Sebastien Bourdeauducq 9d58b4516c manual: Vivado is now default 2016-11-04 11:54:04 +08:00
whitequark 208f3f8568 manual: fix Rust installation instructions. 2016-11-04 03:35:59 +00:00
Sebastien Bourdeauducq 77bc247744 manual: add missing cd 2016-11-04 00:04:26 +08:00
Sebastien Bourdeauducq a252b88a36 manual: fix binutils patch download URL 2016-11-03 23:56:13 +08:00
whitequark cd68577dbc compiler: add support for async RPCs. 2016-10-30 00:57:31 +00:00
Robert Jördens 6d07a16c62 Merge branch 'master' into phaser
* master: (72 commits)
  gateware: extend mailbox to 3 entries.
  master/worker_db: set default value for archive
  master: keep dataset manager consistent when set_dataset is called with contradictory attributes
  master: archive input datasets. Closes #587
  master: ensure same dataset is in broadcast and local when mutating
  scheduler: default submission arguments, closes #577
  pdq2: sync with pdq2
  doc: clarify usage of pause/check_pause, closes #571
  dashboard/datasets: use scientific spinbox and increase number of decimals, closes #572
  gateware/spi: fix import
  runtime: fix use of $(realpath) in Makefile.
  test: fix printf specifier.
  llvm_ir_generator: make sure RPC allocations are not underaligned.
  runtime: use i64 for watchdog timeout, not i32.
  runtime: port ksupport to Rust.
  runtime: remove some redundant libm functions copied inline.
  language: Add "A" (ampere) as well-known unit for arguments
  conda: misoc 0.4 (csr)
  runtime: cap log level at debug.
  runtime: discard unnecessary sections.
  ...
2016-10-28 01:40:11 +02:00
Sebastien Bourdeauducq 69099691f7 doc: clarify usage of pause/check_pause, closes #571 2016-10-17 20:08:15 +08:00
Robert Jördens 18d18b6685 phaser: add sync ttl input for monitoring 2016-10-10 17:13:23 +02:00
Robert Jördens 4d87f0e9e0 phaser: instantiate jesd204b core, wire up 2016-10-06 14:44:22 +02:00
Robert Jördens c54b6e2f3c phaser: add README 2016-10-05 19:24:34 +02:00
Robert Jördens 4a0eaf0f95 phaser: add jesd204b rtio dds
gateware: add jesd204b awg

gateware: copy phaser (df3825a)
dsp/tools: update satadd mixin
phaser: no DDS stubs
dsp: accu fix
phaser: cleanup/reduce

sawg: kernel support and docs

sawg: coredevice api fixes

sawg: example ddb/experiment

phaser: add conda package

examples/phaser: typo

sawg: adapt tests, fix accu stb

sawg: tweak dds parameters

sawg: move/adapt/extend tests

sawg: test phy, refactor

phaser: non-rtio spi

phaser: target cli update

phaser: ad9154-fmc-ebz pins

phaser: reorganize fmc signal naming

phaser: add test mode stubs

phaser: txen is LVTTL

phaser: clk spi xfer test

phaser: spi for ad9154 and ad9516

phaser: spi tweaks

ad9154: add register map from ad9144.xml

ad9516: add register map from ad9517.xml and manual adaptation

ad9154_reg: just generate getter/setter macros as well

ad9154: reg WIP

ad9154: check and fix registers

kc705: single ended rtio_external_clk

use single ended user_sma_clk_n instead of p/n to free up one clock sma

kc705: mirror clk200 at user_sma_clock_p

ad9516_regs.h: fix B_COUNTER_MSB

phase: wire up clocking differently

needs patched misoc

kc705: feed rtio_external_clock directly

kc705: remove rtio_external_clk for phaser

phaser: spi tweaks

ad9516: some startup

ad9516_reg fixes

phaser: setup ad9516 for supposed 500 MHz operation

ad9516: use full duplex spi

ad9154_reg: add CONFIG_REG_2

ad9154_reg: fixes

phaser: write some ad9154 config

ad9154_reg: fixes

ad9154: more init, and human readable setup

ad9154/ad9516: merge spi support

ad9154: status readout

Revert "kc705: remove rtio_external_clk for phaser"

This reverts commit d500288bb44f2bf2eeb0c2f237aa207b0a8b1366.

Revert "kc705: feed rtio_external_clock directly"

This reverts commit 8dc7825519e3e75b7d3d29c9abf10fc6e3a8b4c5.

Revert "phase: wire up clocking differently"

This reverts commit ad9cc450ffa35abb54b0842d56f6cf6c53c6fbcc.

Revert "kc705: mirror clk200 at user_sma_clock_p"

This reverts commit 7f0dffdcdd28e648af84725682f82ec6e5642eba.

Revert "kc705: single ended rtio_external_clk"

This reverts commit a9426d983fbf5c1cb768da8f1da26d9b7335e9cf.

ad9516: 2000 MHz clock

phaser: test clock dist

phaser: test freqs

ad9154: iostandards

phaser: drop clock monitor

phaser: no separate i2c

phaser: drive rtio from refclk, wire up sysref

phaser: ttl channel for sync

ad9154: 4x interp, status, tweaks

phaser: sync/sysref 33V banks

phaser: sync/sysref LVDS_25 inputs are VCCO tolerant

phaser: user input-only ttls

phaser: rtio fully from refclk

ad9154: reg name usage fix

ad9154: check register modifications

Revert "ad9154: check register modifications"

This reverts commit 45121d90edf89f7bd8703503f9f317ad050f9564.

ad9154: fix status code

ad9154: addrinc, recal serdes pll

phaser: coredevice, example tweaks

sawg: missing import

sawg: type fixes

ad9514: move setup functions

ad9154: msb first also decreasing addr

phaser: use sys4x for rtio internal ref

phaser: move init code to main

phaser: naming cleanup

phaser: cleanup pins

phaser: move spi to kernel cpu

phaser: kernel support for ad9154 spi

ad9154: add r/w methods

ad9154: need return annotations

ad9154: r/w methods are kernels

ad9154_reg: portable helpers

phaser: cleanup startup kernel

ad9154: status test

ad9154: prbs test

ad9154: move setup, document

phaser: more documentation
2016-10-05 16:17:50 +02:00
Sebastien Bourdeauducq 82fbd3e9c9 doc: CCBs, applet setup from experiment 2016-09-09 23:25:29 +08:00
Sebastien Bourdeauducq 4ef5eb2644 doc: move VADJ, closes #554 2016-09-09 18:40:58 +08:00
Robert Jördens c38e2cda9d doc/manual: no analytics_id with rtd 2016-08-25 22:21:29 +02:00
Robert Jördens 0a4d4e30ef doc: use sphinx_rtd_theme 2016-08-25 21:52:46 +02:00
Robert Jördens 8753785ef7 doc/rtio: cleanup 2016-08-25 20:42:44 +02:00
Robert Jördens 9f7c33ca84 doc/rtio: make vis coloring consistent 2016-08-25 19:23:06 +02:00
Robert Jördens c2e0e0bd7e doc/rtio: vis RTIOUndeflow tweak 2016-08-25 19:14:31 +02:00
Robert Jördens 8f952fdb98 doc/rtio: vis RTIOUnderflow 2016-08-25 19:06:11 +02:00
Robert Jördens 446dcf2123 doc/rtio: input vis 2016-08-25 18:42:16 +02:00
Robert Jördens eb180da730 doc/rtio: vis: now_mu -> now since not didactically relevant 2016-08-25 18:18:02 +02:00
Robert Jördens aabe53e5fa doc/rtio: handover vis, tweak other vis's 2016-08-25 18:15:48 +02:00
Robert Jördens 7481d4e732 doc/rtio: sync() visualization 2016-08-25 14:51:34 +02:00
Robert Jördens aee0345ed7 doc: ship wavedrom js b/c https 2016-08-25 12:56:36 +02:00