Sebastien Bourdeauducq
|
cf2a4972f7
|
remove WRPLL
|
2023-01-06 17:53:11 +08:00 |
Sebastien Bourdeauducq
|
5da9794895
|
remove Sayma and Metlino support
|
2023-01-06 17:41:12 +08:00 |
occheung
|
eecd825d23
|
firmware: suppress warning
|
2021-09-10 13:25:12 +08:00 |
occheung
|
7542105f0f
|
board_misoc: remove pcr
VexRiscv seems to not support additional hardware performance counter, at least I have not seen any documentation on how to use it.
|
2021-09-10 13:25:12 +08:00 |
Sebastien Bourdeauducq
|
c5137eeb62
|
firmware: remove legacy hmc542 code
|
2019-12-20 15:25:55 +08:00 |
Sebastien Bourdeauducq
|
4832bfb08c
|
wrpll: i2c functions, select_recovered_clock placeholder
|
2019-11-27 21:21:00 +08:00 |
Sebastien Bourdeauducq
|
a78e493b72
|
firmware: load slave FPGA in bootloader
|
2019-10-31 12:42:40 +08:00 |
Sebastien Bourdeauducq
|
8f76a3218e
|
firmware: move i2c to libboard_misoc, enable IPv6 in bootloader, share network settings
|
2019-10-21 12:58:52 +08:00 |
Sebastien Bourdeauducq
|
05e8f24c24
|
sayma2: JESD204 synchronization
|
2019-10-18 23:28:47 +08:00 |
Sebastien Bourdeauducq
|
4b3baf4825
|
firmware: run PRBS and STPL JESD204 tests
|
2019-10-08 00:10:36 +08:00 |
Sebastien Bourdeauducq
|
f62dc7e1d4
|
sayma: refactor JESD DAC channel groups
|
2019-10-06 20:15:09 +08:00 |
Sebastien Bourdeauducq
|
e9b81f6e33
|
remove serwb
DRTIO is a better solution
|
2019-10-06 18:10:23 +08:00 |
Astro
|
71b3c66af9
|
firmware: conditionally compile has_si5324
avoids unused warnings where this module is not used.
|
2019-08-29 09:04:54 +08:00 |
Astro
|
8fc5ce902f
|
firmware: let kasli obtain default hardware_addr from i2c_eeprom
|
2019-08-17 09:15:26 +08:00 |
Astro
|
d666f3d573
|
firmware: factor out mod pca9548 from si5324
orepares for further i2c devices.
|
2019-08-17 09:15:26 +08:00 |
Sebastien Bourdeauducq
|
b38c57d73b
|
firmware: send DRTIO routing table to satellite
|
2018-09-11 14:12:41 +08:00 |
Sebastien Bourdeauducq
|
7ae44f3417
|
firmware: add routing table (WIP)
|
2018-09-09 21:49:28 +08:00 |
Sebastien Bourdeauducq
|
d523d03f71
|
sayma: automated FPGA SYSREF phase offset calibration
|
2018-07-26 14:53:28 +08:00 |
Robert Jördens
|
a143e238a8
|
savel_fpga: get rid of unneeded config
|
2018-06-12 10:24:04 +02:00 |
Sebastien Bourdeauducq
|
560889372f
|
firmware: grabber support
|
2018-05-29 10:26:36 +08:00 |
whitequark
|
1b0384c513
|
firmware: fix satman build.
|
2018-05-15 16:35:05 +00:00 |
whitequark
|
ae50196186
|
firmware: rename libproto to libproto_artiq.
libproto_artiq only has ARTIQ-specific protocols.
|
2018-05-14 18:09:44 +00:00 |
whitequark
|
02b8426f60
|
firmware: rename libboard to libboard_misoc.
By analogy with libbuild_misoc. Hopefully one day it actually gets
moved to misoc...
|
2018-05-14 18:09:44 +00:00 |
whitequark
|
1ff42683d9
|
firmware: merge libamp into libboard_artiq.
All gateware interfaces live in libboard_artiq, but libamp predates
libboard_artiq.
|
2018-05-14 17:33:25 +00:00 |
whitequark
|
764386c9e3
|
firmware: split libdrtioaux into libproto and libboard_artiq modules.
All other protocol code lives in libproto, and all other gateware
interfaces live in libboard_artiq.
|
2018-05-14 17:26:59 +00:00 |
Robert Jördens
|
0c49201be7
|
firmware: add slave fpga serial load support
based on whitequark's work in f95fb27
m-labs/artiq#813
|
2018-02-28 19:27:52 +01:00 |
Robert Jördens
|
cedecc3030
|
Revert "firmware: Sayma RTM FPGA bitstream loading prototype (#813)."
This reverts commit f95fb273f1 .
Will be replaced with a bitbang/GPIO based version.
|
2018-02-28 18:43:56 +01:00 |
whitequark
|
f95fb273f1
|
firmware: Sayma RTM FPGA bitstream loading prototype (#813).
|
2018-02-28 16:46:23 +00:00 |
whitequark
|
1f82ceaa85
|
firmware: add HMC542 (Allaki) support.
|
2018-01-19 04:47:26 +00:00 |
whitequark
|
acd13837ff
|
firmware: implement the new bootloader.
|
2017-12-28 13:18:51 +00:00 |
whitequark
|
d3066e5044
|
firmware: oops, misoc #[cfg]s were missing from libboard_artiq.
|
2017-12-28 07:36:33 +00:00 |
whitequark
|
ca419aa3c2
|
firmware: split out libboard_artiq from libboard.
|
2017-12-28 07:07:00 +00:00 |