firmware: oops, misoc #[cfg]s were missing from libboard_artiq.

artiq/firmware/Cargo.lock

@@ -38,6 +38,8 @@ dependencies = [
  "bitflags 1.0.1 (registry+https://github.com/rust-lang/crates.io-index)",
  "board 0.0.0",
  "build_artiq 0.0.0",
+ "build_misoc 0.0.0",
+ "log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
 ]
 
 [[package]]

artiq/firmware/libboard_artiq/Cargo.toml

@@ -9,10 +9,12 @@ name = "board_artiq"
 path = "lib.rs"
 
 [build-dependencies]
+build_misoc = { path = "../libbuild_misoc" }
 build_artiq = { path = "../libbuild_artiq" }
 
 [dependencies]
 bitflags = "1.0"
+log = { version = "0.3", default-features = false }
 board = { path = "../libboard" }
 
 [features]

artiq/firmware/libboard_artiq/build.rs

@@ -1,3 +1,4 @@
+extern crate build_misoc;
 extern crate build_artiq;
 
 use std::env;
@@ -24,5 +25,6 @@ fn gen_hmc7043_writes() {
 }
 
 fn main() {
+    build_misoc::cfg();
     gen_hmc7043_writes();
 }

artiq/firmware/libboard_artiq/i2c.rs

@@ -1,22 +1,18 @@
 #[cfg(has_i2c)]
-use csr;
+mod imp {
+    use board::{csr, clock};
 
-#[cfg(has_i2c)]
-mod io {
-    use csr;
-    use clock;
-
-    pub fn half_period() { clock::spin_us(100) }
+    fn half_period() { clock::spin_us(100) }
     fn sda_bit(busno: u8) -> u8 { 1 << (2 * busno + 1) }
     fn scl_bit(busno: u8) -> u8 { 1 << (2 * busno) }
 
-    pub fn sda_i(busno: u8) -> bool {
+    fn sda_i(busno: u8) -> bool {
         unsafe {
             csr::i2c::in_read() & sda_bit(busno) != 0
         }
     }
 
-    pub fn sda_oe(busno: u8, oe: bool) {
+    fn sda_oe(busno: u8, oe: bool) {
         unsafe {
             let reg = csr::i2c::oe_read();
             let reg = if oe { reg | sda_bit(busno) } else { reg & !sda_bit(busno) };
@@ -24,7 +20,7 @@ mod io {
         }
     }
 
-    pub fn sda_o(busno: u8, o: bool) {
+    fn sda_o(busno: u8, o: bool) {
         unsafe {
             let reg = csr::i2c::out_read();
             let reg = if o  { reg | sda_bit(busno) } else { reg & !sda_bit(busno) };
@@ -32,7 +28,7 @@ mod io {
         }
     }
 
-    pub fn scl_oe(busno: u8, oe: bool) {
+    fn scl_oe(busno: u8, oe: bool) {
         unsafe {
             let reg = csr::i2c::oe_read();
             let reg = if oe { reg | scl_bit(busno) } else { reg & !scl_bit(busno) };
@@ -40,151 +36,144 @@ mod io {
         }
     }
 
-    pub fn scl_o(busno: u8, o: bool) {
+    fn scl_o(busno: u8, o: bool) {
         unsafe {
             let reg = csr::i2c::out_read();
             let reg = if o  { reg | scl_bit(busno) } else { reg & !scl_bit(busno) };
             csr::i2c::out_write(reg)
         }
     }
-}
 
-#[cfg(has_i2c)]
-pub fn init() {
-    for busno in 0..csr::CONFIG_I2C_BUS_COUNT {
-        let busno = busno as u8;
-        // Set SCL as output, and high level
-        io::scl_o(busno, true);
-        io::scl_oe(busno, true);
-        // Prepare a zero level on SDA so that sda_oe pulls it down
-        io::sda_o(busno, false);
-        // Release SDA
-        io::sda_oe(busno, false);
+    pub fn init() {
+        for busno in 0..csr::CONFIG_I2C_BUS_COUNT {
+            let busno = busno as u8;
+            // Set SCL as output, and high level
+            scl_o(busno, true);
+            scl_oe(busno, true);
+            // Prepare a zero level on SDA so that sda_oe pulls it down
+            sda_o(busno, false);
+            // Release SDA
+            sda_oe(busno, false);
 
-        // Check the I2C bus is ready
-        io::half_period();
-        io::half_period();
-        if !io::sda_i(busno) {
-            error!("SDA is stuck low on bus #{}", busno)
+            // Check the I2C bus is ready
+            half_period();
+            half_period();
+            if !sda_i(busno) {
+                error!("SDA is stuck low on bus #{}", busno)
+            }
         }
     }
-}
 
-#[cfg(has_i2c)]
-pub fn start(busno: u8) -> Result<(), ()> {
-    if busno as u32 >= csr::CONFIG_I2C_BUS_COUNT {
-        return Err(())
+    pub fn start(busno: u8) -> Result<(), ()> {
+        if busno as u32 >= csr::CONFIG_I2C_BUS_COUNT {
+            return Err(())
+        }
+        // Set SCL high then SDA low
+        scl_o(busno, true);
+        half_period();
+        sda_oe(busno, true);
+        half_period();
+        Ok(())
     }
-    // Set SCL high then SDA low
-    io::scl_o(busno, true);
-    io::half_period();
-    io::sda_oe(busno, true);
-    io::half_period();
-    Ok(())
-}
 
-#[cfg(has_i2c)]
-pub fn restart(busno: u8) -> Result<(), ()> {
-    if busno as u32 >= csr::CONFIG_I2C_BUS_COUNT {
-        return Err(())
+    pub fn restart(busno: u8) -> Result<(), ()> {
+        if busno as u32 >= csr::CONFIG_I2C_BUS_COUNT {
+            return Err(())
+        }
+        // Set SCL low then SDA high */
+        scl_o(busno, false);
+        half_period();
+        sda_oe(busno, false);
+        half_period();
+        // Do a regular start
+        start(busno)?;
+        Ok(())
     }
-    // Set SCL low then SDA high */
-    io::scl_o(busno, false);
-    io::half_period();
-    io::sda_oe(busno, false);
-    io::half_period();
-    // Do a regular start
-    start(busno)?;
-    Ok(())
-}
 
-#[cfg(has_i2c)]
-pub fn stop(busno: u8) -> Result<(), ()> {
-    if busno as u32 >= csr::CONFIG_I2C_BUS_COUNT {
-        return Err(())
+    pub fn stop(busno: u8) -> Result<(), ()> {
+        if busno as u32 >= csr::CONFIG_I2C_BUS_COUNT {
+            return Err(())
+        }
+        // First, make sure SCL is low, so that the target releases the SDA line
+        scl_o(busno, false);
+        half_period();
+        // Set SCL high then SDA high
+        sda_oe(busno, true);
+        scl_o(busno, true);
+        half_period();
+        sda_oe(busno, false);
+        half_period();
+        Ok(())
     }
-    // First, make sure SCL is low, so that the target releases the SDA line
-    io::scl_o(busno, false);
-    io::half_period();
-    // Set SCL high then SDA high
-    io::sda_oe(busno, true);
-    io::scl_o(busno, true);
-    io::half_period();
-    io::sda_oe(busno, false);
-    io::half_period();
-    Ok(())
-}
 
-#[cfg(has_i2c)]
-pub fn write(busno: u8, data: u8) -> Result<bool, ()> {
-    if busno as u32 >= csr::CONFIG_I2C_BUS_COUNT {
-        return Err(())
+    pub fn write(busno: u8, data: u8) -> Result<bool, ()> {
+        if busno as u32 >= csr::CONFIG_I2C_BUS_COUNT {
+            return Err(())
+        }
+        // MSB first
+        for bit in (0..8).rev() {
+            // Set SCL low and set our bit on SDA
+            scl_o(busno, false);
+            sda_oe(busno, data & (1 << bit) == 0);
+            half_period();
+            // Set SCL high ; data is shifted on the rising edge of SCL
+            scl_o(busno, true);
+            half_period();
+        }
+        // Check ack
+        // Set SCL low, then release SDA so that the I2C target can respond
+        scl_o(busno, false);
+        half_period();
+        sda_oe(busno, false);
+        // Set SCL high and check for ack
+        scl_o(busno, true);
+        half_period();
+        // returns true if acked (I2C target pulled SDA low)
+        Ok(!sda_i(busno))
     }
-    // MSB first
-    for bit in (0..8).rev() {
-        // Set SCL low and set our bit on SDA
-        io::scl_o(busno, false);
-        io::sda_oe(busno, data & (1 << bit) == 0);
-        io::half_period();
-        // Set SCL high ; data is shifted on the rising edge of SCL
-        io::scl_o(busno, true);
-        io::half_period();
+
+    pub fn read(busno: u8, ack: bool) -> Result<u8, ()> {
+        if busno as u32 >= csr::CONFIG_I2C_BUS_COUNT {
+            return Err(())
+        }
+        // Set SCL low first, otherwise setting SDA as input may cause a transition
+        // on SDA with SCL high which will be interpreted as START/STOP condition.
+        scl_o(busno, false);
+        half_period(); // make sure SCL has settled low
+        sda_oe(busno, false);
+
+        let mut data: u8 = 0;
+
+        // MSB first
+        for bit in (0..8).rev() {
+            scl_o(busno, false);
+            half_period();
+            // Set SCL high and shift data
+            scl_o(busno, true);
+            half_period();
+            if sda_i(busno) { data |= 1 << bit }
+        }
+        // Send ack
+        // Set SCL low and pull SDA low when acking
+        scl_o(busno, false);
+        if ack { sda_oe(busno, true) }
+        half_period();
+        // then set SCL high
+        scl_o(busno, true);
+        half_period();
+
+        Ok(data)
     }
-    // Check ack
-    // Set SCL low, then release SDA so that the I2C target can respond
-    io::scl_o(busno, false);
-    io::half_period();
-    io::sda_oe(busno, false);
-    // Set SCL high and check for ack
-    io::scl_o(busno, true);
-    io::half_period();
-    // returns true if acked (I2C target pulled SDA low)
-    Ok(!io::sda_i(busno))
-}
-
-#[cfg(has_i2c)]
-pub fn read(busno: u8, ack: bool) -> Result<u8, ()> {
-    if busno as u32 >= csr::CONFIG_I2C_BUS_COUNT {
-        return Err(())
-    }
-    // Set SCL low first, otherwise setting SDA as input may cause a transition
-    // on SDA with SCL high which will be interpreted as START/STOP condition.
-    io::scl_o(busno, false);
-    io::half_period(); // make sure SCL has settled low
-    io::sda_oe(busno, false);
-
-    let mut data: u8 = 0;
-
-    // MSB first
-    for bit in (0..8).rev() {
-        io::scl_o(busno, false);
-        io::half_period();
-        // Set SCL high and shift data
-        io::scl_o(busno, true);
-        io::half_period();
-        if io::sda_i(busno) { data |= 1 << bit }
-    }
-    // Send ack
-    // Set SCL low and pull SDA low when acking
-    io::scl_o(busno, false);
-    if ack { io::sda_oe(busno, true) }
-    io::half_period();
-    // then set SCL high
-    io::scl_o(busno, true);
-    io::half_period();
-
-    Ok(data)
 }
 
 #[cfg(not(has_i2c))]
-pub fn init() {}
-#[cfg(not(has_i2c))]
-pub fn start(_busno: u8) -> Result<(), ()> { Err(()) }
-#[cfg(not(has_i2c))]
-pub fn restart(_busno: u8) -> Result<(), ()> { Err(()) }
-#[cfg(not(has_i2c))]
-pub fn stop(_busno: u8) -> Result<(), ()> { Err(()) }
-#[cfg(not(has_i2c))]
-pub fn write(_busno: u8, _data: u8) -> Result<bool, ()> { Err(()) }
-#[cfg(not(has_i2c))]
-pub fn read(_busno: u8, _ack: bool) -> Result<u8, ()> { Err(()) }
+mod imp {
+    pub fn init() {}
+    pub fn start(_busno: u8) -> Result<(), ()> { Err(()) }
+    pub fn restart(_busno: u8) -> Result<(), ()> { Err(()) }
+    pub fn stop(_busno: u8) -> Result<(), ()> { Err(()) }
+    pub fn write(_busno: u8, _data: u8) -> Result<bool, ()> { Err(()) }
+    pub fn read(_busno: u8, _ack: bool) -> Result<u8, ()> { Err(()) }
+}
+
+pub use self::imp::*;

artiq/firmware/libboard_artiq/lib.rs

@@ -3,6 +3,8 @@
 
 #[macro_use]
 extern crate bitflags;
+#[macro_use]
+extern crate log;
 extern crate board;
 
 pub mod pcr;

artiq/firmware/libboard_artiq/si5324.rs

@@ -1,7 +1,6 @@
 use core::result;
+use board::{csr, clock};
 use i2c;
-use clock;
-use csr;
 
 type Result<T> = result::Result<T, &'static str>;
 
@@ -200,8 +199,8 @@ pub fn setup(settings: &FrequencySettings) -> Result<()> {
     if !has_clkin2()? {
         return Err("Si5324 misses CLKIN2 signal");
     }
-    monitor_lock()?;
 
+    monitor_lock()?;
     Ok(())
 }