..
__init__.py
integrate new AD9914 driver
2018-05-13 23:29:35 +08:00
ad53xx.py
ad53xx: tweak spi readback
2018-05-16 19:08:27 +02:00
ad9154_reg.py
add back ad9154_reg.py
2017-06-19 23:45:32 +08:00
ad9154_spi.py
firmware, sayma: port converter_spi to spi2
2018-03-01 11:19:18 +01:00
ad9910.py
urukul/ad9910: support blind init
2018-04-27 13:48:40 +02:00
ad9912_reg.py
coredevice/ad9912: add [untested, wip]
2017-11-24 18:47:46 +01:00
ad9912.py
ad9910/2: add sw invariant only when passed
2018-03-07 21:32:59 +01:00
ad9914.py
ad9914: fix frequency_to_xftw and xftw_to_frequency
2018-05-14 23:49:00 +08:00
cache.py
compiler: allow specifying per-function "fast-math" flags.
2016-03-28 21:44:08 +00:00
comm_analyzer.py
integrate new AD9914 driver
2018-05-13 23:29:35 +08:00
comm_kernel.py
coredevice.CommKernel: modernize. NFC.
2018-05-16 14:40:14 +00:00
comm_mgmt.py
firmware: move config requests to management protocol.
2018-05-16 14:32:49 +00:00
comm_moninj.py
reorganize core device communication code
2017-02-27 18:37:30 +08:00
comm.py
artiq_devtool: use CommMgmt instead of shelling out to artiq_coremgmt.
2018-05-16 14:08:32 +00:00
core.py
drtio: add kernel API to check for link status. Closes #941
2018-03-05 00:23:55 +08:00
dma.py
DMA: add API for a much faster replay using handles.
2017-04-18 08:20:12 +00:00
drtio_dbg.py
drtio: clean up remnants of removed debug functions
2018-02-19 15:14:32 +08:00
exceptions.py
integrate new AD9914 driver
2018-05-13 23:29:35 +08:00
i2c.py
manual: add short description of drivers, with replace support information. Closes #777
2017-07-20 12:01:29 +08:00
novogorny.py
novogorny: conv -> cnv
2018-03-21 18:38:42 +00:00
pcf8574a.py
coredevice: add pcf8574a driver
2018-03-06 14:27:19 +01:00
pcu.py
pcu: refactor into a device
2017-02-19 19:34:55 +01:00
profiler.py
firmware: implement an edge profiler.
2018-05-16 21:53:53 +00:00
rtio.py
rtio: rtio_output_{list->wide}
2016-11-29 17:22:55 +01:00
runtime.py
artiq_dir: move out of tools to unlink dependencies
2016-01-25 18:15:50 -07:00
sampler.py
sampler: unroll conversion for speed
2018-05-14 12:26:49 +00:00
sawg.py
sawg: fix typo
2017-11-22 20:06:02 +08:00
shiftreg.py
coredevice: add shift register driver
2017-10-31 23:13:06 +08:00
spi2.py
spi2: xfers take one more cycle until ~busy
2018-03-09 20:48:17 +01:00
spline.py
spline: be really verbose
2017-07-07 11:43:58 +02:00
spr.py
coredevice: expose PCU
2017-02-18 14:09:12 +01:00
suservo.py
suservo: support pure-I
2018-05-14 18:48:27 +00:00
ttl.py
manual: add short description of drivers, with replace support information. Closes #777
2017-07-20 12:01:29 +08:00
urukul.py
urukul: reg based io-update is a kernel
2018-04-27 16:42:09 +00:00
zotino.py
zotino: use None as default for ldac and clr
2018-04-22 15:03:01 +08:00
31c6c79204