Florent Kermarrec
7642254d83
Merge branch 'master' of http://github.com/m-labs/artiq
2018-05-24 16:51:23 +02:00
Florent Kermarrec
353767bfdb
firmware/hmc830: add VCO subsystem register 6 programming (suggested by hartytp, tested on hardware without regression)
2018-05-24 16:49:49 +02:00
Sebastien Bourdeauducq
19efd8b13e
kasli: refactor EEM code
2018-05-24 18:41:54 +08:00
Florent Kermarrec
ad89c42acc
firmware/serwb: automatically adjust prbs test delay to prbs test cycles, increase prbs test cycles
2018-05-24 10:20:55 +02:00
Florent Kermarrec
19e5280824
firmware/ad9154: cleanup DAC init
...
- Split dac_setup in dac_reset, dat_detect & dac_setup.
- Only do one reset/detection.
- Configure before doing SYSREF scan (otherwise scan don't work at the first scan after power up).
- Do the spi_setup in each function.
2018-05-24 09:34:00 +02:00
Florent Kermarrec
fa3b48737b
firmware/hmc830: Added magic word to HMC830 init sequence (from gkasprow & marmeladapk)
2018-05-24 09:23:00 +02:00
Robert Jördens
9715f774ac
artiq_influxdb: controller (add ping())
2018-05-22 22:12:25 +00:00
whitequark
7aacc04f0c
language: scan functions are not supported on core device.
...
Closes #1009 .
2018-05-22 21:33:35 +00:00
whitequark
dfb4a437f5
manual: mention TRACE log level.
2018-05-22 21:32:00 +00:00
whitequark
b55ce66a1b
Reinstate accidentally removed aqctl_corelog.
...
Closes #1008 .
2018-05-22 21:31:34 +00:00
whitequark
0c6f618056
manual: update to reflect the new artiq_coremgmt tool.
2018-05-22 18:56:04 +00:00
whitequark
ce3c8fcd3e
compiler: add source location to SSA arguments.
...
Fixes #1006 .
2018-05-22 18:14:14 +00:00
Robert Jördens
fcd12e3472
suservo: work around #1007
2018-05-22 17:36:41 +00:00
Robert Jördens
9a86dfe70d
units: add mHz
2018-05-22 17:36:02 +00:00
Robert Jördens
4e863b32a1
coredevice: configurable initial backing state
...
Several core device drivers maintain a copy of some device state.
Since this copy is not transferred between experiments this backing state
can be different from device state when a new experiment is started.
This commit adds support for injecting initial backing state into
experiments via the device database and sets initial backing state where
known.
ad53xx (zotino): spi2 xfer_duration
novogorny: pgia gains
sampler: pgia gains, spi2 pgia and adc xfer_duration
suservo: pgia gains, spi2 pgia xfer_duration
urukul: cpld cfg (partial: rf_sw), attenuator register
spi2: div/length for xfer_duration
close #1003
2018-05-21 18:55:06 +02:00
Sebastien Bourdeauducq
4e5fe672e7
kasli: add tester target
2018-05-21 17:43:39 +08:00
Sebastien Bourdeauducq
2e6b81d59a
kasli_tester: reset core device
2018-05-21 15:35:29 +08:00
Sebastien Bourdeauducq
8513f0b0d4
minor cleanup
2018-05-21 15:35:00 +08:00
whitequark
9b4ad8b5af
compiler: implement local variable demotion.
2018-05-19 17:05:34 +00:00
whitequark
fd110e9848
compiler: sort predecessors in IR dump output.
...
Makes diffs more useful.
2018-05-19 17:02:08 +00:00
whitequark
dc1c4ebf1d
compiler: use ARTIQ_IR_NO_LOC variable to control IR dump output.
...
Useful e.g. in tests or for running diff on irgen output.
2018-05-19 17:02:08 +00:00
whitequark
21a0f26cd1
compiler: do not emit nonstandard !unconditionally* LLVM metadata.
...
This metadata was added by an LLVM patch that was removed because
it was unsound.
2018-05-19 16:58:03 +00:00
Sebastien Bourdeauducq
f953bee79e
kasli_test: add RF switch control
2018-05-18 23:48:29 +08:00
Sebastien Bourdeauducq
f457b59985
kasli_tester: bail out when run from ARTIQ master
2018-05-18 23:30:52 +08:00
Sebastien Bourdeauducq
3cbcb3bff6
move mitll, sysu and ustc device_dbs to kasli_basic
2018-05-18 23:20:40 +08:00
Sebastien Bourdeauducq
bdfd993818
kasli_tester: add Urukul support
2018-05-18 23:18:03 +08:00
Sebastien Bourdeauducq
72aef5799e
kasli/ustc: use TTLOut
2018-05-18 22:55:28 +08:00
Sebastien Bourdeauducq
9a4408a570
add Kasli TTL tester
2018-05-18 22:52:53 +08:00
Sebastien Bourdeauducq
b10d3ee4b4
make RTIO clock switch optional and simplify
...
Kasli no longer has an internal RTIO clock.
Switching clocks dynamically is no longer supported.
2018-05-18 17:41:34 +08:00
Sebastien Bourdeauducq
8a988d0feb
kasli: remove leftover debug print
2018-05-18 17:25:23 +08:00
Sebastien Bourdeauducq
37bd0c2566
kasli: add USTC target
2018-05-18 16:15:07 +08:00
Sebastien Bourdeauducq
73f8e61478
kasli_sysu: fix TTL directions in example device_db
2018-05-18 16:13:50 +08:00
Sebastien Bourdeauducq
826a85950b
manual: add warning about developing section being for developers
2018-05-18 14:18:36 +08:00
Sebastien Bourdeauducq
6476219296
frontend: fix permissions
2018-05-18 00:10:46 +08:00
Robert Jördens
bfff755295
urukul: do IO_RST also when blind
2018-05-17 14:48:49 +00:00
whitequark
5744d97d59
firmware: adjust backtrace addresses correctly.
2018-05-17 08:13:55 +00:00
Sebastien Bourdeauducq
d4f074b1e1
firmware: fix Allaki addressing. Closes #993
2018-05-17 16:02:21 +08:00
whitequark
3b61b7c30b
compiler: fix tests after 4d06c1d8
.
2018-05-16 21:53:53 +00:00
whitequark
31c6c79204
firmware: implement an edge profiler.
...
It doesn't work extremely well, and the results can be somewhat
confusing, and it needs a libunwind patch, but it's the best I could
do and it seems still useful.
2018-05-16 21:53:53 +00:00
Robert Jördens
99f7672c79
ad53xx: tweak spi readback
2018-05-16 19:08:27 +02:00
Sebastien Bourdeauducq
a640041844
firmware: improve ad9154/hmc830/hmc7043 messaging
2018-05-16 23:15:17 +08:00
Sebastien Bourdeauducq
fedf7f0c87
firmware/ad9154: cleanup sysref scan and run everytime
2018-05-16 23:01:19 +08:00
Sebastien Bourdeauducq
1364cd2948
firmware/hmc830_7043: break out HMC830 SPI mode selection
2018-05-16 22:46:45 +08:00
Sebastien Bourdeauducq
0aadd3a361
firmware/hmc830_7043: improve messaging
2018-05-16 22:46:45 +08:00
whitequark
4d06c1d84b
coredevice.CommKernel: modernize. NFC.
2018-05-16 14:40:14 +00:00
whitequark
ca93b94aea
firmware: move config requests to management protocol.
...
They were only in session protocol because of historical reasons.
2018-05-16 14:32:49 +00:00
whitequark
a39f8d6634
artiq_devtool: use CommMgmt instead of shelling out to artiq_coremgmt.
...
(Which no longer exists.)
This also fixes `artiq_devtool hotswap` to work without
an `artiq_devtool connect` running in background.
2018-05-16 14:08:32 +00:00
whitequark
d446a3293e
frontend: merge core{config,log,boot,debug,profile} into coremgmt.
2018-05-16 14:08:32 +00:00
Sebastien Bourdeauducq
b81b20caf8
conda: use h5py 2.8
...
For some reason, conda installs 2.7 by default, which causes messages such as:
/home/sb/miniconda3/envs/py35/lib/python3.5/site-packages/h5py/__init__.py:36: FutureWarning: Conversion of the second argument of issubdtype from `float` to `np.floating` is deprecated. In future, it will be treated as `np.float64 == np.dtype(float).type`.
2018-05-16 16:25:44 +08:00
Florent Kermarrec
f77bcbebb5
serwb/test_serwb_core: fix
2018-05-16 08:34:53 +02:00