srenblad
/
artiq
forked from M-Labs/artiq
1
0
Fork 0
Code Pull Requests Activity
5,931 Commits 63 Branches 34 Tags 19 MiB
Commit Graph

5931 Commits

Author SHA1 Message Date
Florent Kermarrec 353767bfdb firmware/hmc830: add VCO subsystem register 6 programming (suggested by hartytp, tested on hardware without regression) 2018-05-24 16:49:49 +02:00
Sebastien Bourdeauducq 19efd8b13e kasli: refactor EEM code 2018-05-24 18:41:54 +08:00
Florent Kermarrec ad89c42acc firmware/serwb: automatically adjust prbs test delay to prbs test cycles, increase prbs test cycles 2018-05-24 10:20:55 +02:00
Florent Kermarrec 19e5280824 firmware/ad9154: cleanup DAC init 
- Split dac_setup in dac_reset, dat_detect & dac_setup.
- Only do one reset/detection.
- Configure before doing SYSREF scan (otherwise scan don't work at the first scan after power up).
- Do the spi_setup in each function.
 2018-05-24 09:34:00 +02:00
Florent Kermarrec fa3b48737b firmware/hmc830: Added magic word to HMC830 init sequence (from gkasprow & marmeladapk) 2018-05-24 09:23:00 +02:00
Robert Jördens 9715f774ac artiq_influxdb: controller (add ping()) 2018-05-22 22:12:25 +00:00
whitequark 7aacc04f0c language: scan functions are not supported on core device. 
Closes #1009.
 2018-05-22 21:33:35 +00:00
whitequark dfb4a437f5 manual: mention TRACE log level. 2018-05-22 21:32:00 +00:00
whitequark b55ce66a1b Reinstate accidentally removed aqctl_corelog. 
Closes #1008.
 2018-05-22 21:31:34 +00:00
whitequark 0c6f618056 manual: update to reflect the new artiq_coremgmt tool. 2018-05-22 18:56:04 +00:00
whitequark ce3c8fcd3e compiler: add source location to SSA arguments. 
Fixes #1006.
 2018-05-22 18:14:14 +00:00
Robert Jördens fcd12e3472 suservo: work around #1007 2018-05-22 17:36:41 +00:00
Robert Jördens 9a86dfe70d units: add mHz 2018-05-22 17:36:02 +00:00
Robert Jördens 4e863b32a1 coredevice: configurable initial backing state 
Several core device drivers maintain a copy of some device state.
Since this copy is not transferred between experiments this backing state
can be different from device state when a new experiment is started.

This commit adds support for injecting initial backing state into
experiments via the device database and sets initial backing state where
known.

ad53xx (zotino): spi2 xfer_duration
novogorny: pgia gains
sampler: pgia gains, spi2 pgia and adc xfer_duration
suservo: pgia gains, spi2 pgia xfer_duration
urukul: cpld cfg (partial: rf_sw), attenuator register
spi2: div/length for xfer_duration

close #1003
 2018-05-21 18:55:06 +02:00
Sebastien Bourdeauducq 4e5fe672e7 kasli: add tester target 2018-05-21 17:43:39 +08:00
Sebastien Bourdeauducq 2e6b81d59a kasli_tester: reset core device 2018-05-21 15:35:29 +08:00
Sebastien Bourdeauducq 8513f0b0d4 minor cleanup 2018-05-21 15:35:00 +08:00
whitequark 9b4ad8b5af compiler: implement local variable demotion. 2018-05-19 17:05:34 +00:00
whitequark fd110e9848 compiler: sort predecessors in IR dump output. 
Makes diffs more useful.
 2018-05-19 17:02:08 +00:00
whitequark dc1c4ebf1d compiler: use ARTIQ_IR_NO_LOC variable to control IR dump output. 
Useful e.g. in tests or for running diff on irgen output.
 2018-05-19 17:02:08 +00:00
whitequark 21a0f26cd1 compiler: do not emit nonstandard !unconditionally* LLVM metadata. 
This metadata was added by an LLVM patch that was removed because
it was unsound.
 2018-05-19 16:58:03 +00:00
Sebastien Bourdeauducq f953bee79e kasli_test: add RF switch control 2018-05-18 23:48:29 +08:00
Sebastien Bourdeauducq f457b59985 kasli_tester: bail out when run from ARTIQ master 2018-05-18 23:30:52 +08:00
Sebastien Bourdeauducq 3cbcb3bff6 move mitll, sysu and ustc device_dbs to kasli_basic 2018-05-18 23:20:40 +08:00
Sebastien Bourdeauducq bdfd993818 kasli_tester: add Urukul support 2018-05-18 23:18:03 +08:00
Sebastien Bourdeauducq 72aef5799e kasli/ustc: use TTLOut 2018-05-18 22:55:28 +08:00
Sebastien Bourdeauducq 9a4408a570 add Kasli TTL tester 2018-05-18 22:52:53 +08:00
Sebastien Bourdeauducq b10d3ee4b4 make RTIO clock switch optional and simplify 
Kasli no longer has an internal RTIO clock.
Switching clocks dynamically is no longer supported.
 2018-05-18 17:41:34 +08:00
Sebastien Bourdeauducq 8a988d0feb kasli: remove leftover debug print 2018-05-18 17:25:23 +08:00
Sebastien Bourdeauducq 37bd0c2566 kasli: add USTC target 2018-05-18 16:15:07 +08:00
Sebastien Bourdeauducq 73f8e61478 kasli_sysu: fix TTL directions in example device_db 2018-05-18 16:13:50 +08:00
Sebastien Bourdeauducq 826a85950b manual: add warning about developing section being for developers 2018-05-18 14:18:36 +08:00
Sebastien Bourdeauducq 6476219296 frontend: fix permissions 2018-05-18 00:10:46 +08:00
Robert Jördens bfff755295 urukul: do IO_RST also when blind 2018-05-17 14:48:49 +00:00
whitequark 5744d97d59 firmware: adjust backtrace addresses correctly. 2018-05-17 08:13:55 +00:00
Sebastien Bourdeauducq d4f074b1e1 firmware: fix Allaki addressing. Closes #993 2018-05-17 16:02:21 +08:00
whitequark 3b61b7c30b compiler: fix tests after 4d06c1d8. 2018-05-16 21:53:53 +00:00
whitequark 31c6c79204 firmware: implement an edge profiler. 
It doesn't work extremely well, and the results can be somewhat
confusing, and it needs a libunwind patch, but it's the best I could
do and it seems still useful.
 2018-05-16 21:53:53 +00:00
Robert Jördens 99f7672c79 ad53xx: tweak spi readback 2018-05-16 19:08:27 +02:00
Sebastien Bourdeauducq a640041844 firmware: improve ad9154/hmc830/hmc7043 messaging 2018-05-16 23:15:17 +08:00
Sebastien Bourdeauducq fedf7f0c87 firmware/ad9154: cleanup sysref scan and run everytime 2018-05-16 23:01:19 +08:00
Sebastien Bourdeauducq 1364cd2948 firmware/hmc830_7043: break out HMC830 SPI mode selection 2018-05-16 22:46:45 +08:00
Sebastien Bourdeauducq 0aadd3a361 firmware/hmc830_7043: improve messaging 2018-05-16 22:46:45 +08:00
whitequark 4d06c1d84b coredevice.CommKernel: modernize. NFC. 2018-05-16 14:40:14 +00:00
whitequark ca93b94aea firmware: move config requests to management protocol. 
They were only in session protocol because of historical reasons.
 2018-05-16 14:32:49 +00:00
whitequark a39f8d6634 artiq_devtool: use CommMgmt instead of shelling out to artiq_coremgmt. 
(Which no longer exists.)

This also fixes `artiq_devtool hotswap` to work without
an `artiq_devtool connect` running in background.
 2018-05-16 14:08:32 +00:00
whitequark d446a3293e frontend: merge core{config,log,boot,debug,profile} into coremgmt. 2018-05-16 14:08:32 +00:00
Sebastien Bourdeauducq b81b20caf8 conda: use h5py 2.8 
For some reason, conda installs 2.7 by default, which causes messages such as:
/home/sb/miniconda3/envs/py35/lib/python3.5/site-packages/h5py/__init__.py:36: FutureWarning: Conversion of the second argument of issubdtype from `float` to `np.floating` is deprecated. In future, it will be treated as `np.float64 == np.dtype(float).type`.
 2018-05-16 16:25:44 +08:00
Florent Kermarrec f77bcbebb5 serwb/test_serwb_core: fix 2018-05-16 08:34:53 +02:00
Florent Kermarrec 77fc5c599f serwb/test: update 2018-05-15 23:52:58 +02:00