9dcaae6395
metlino: use variant output directory
2019-05-19 16:24:51 +08:00
b4779969d0
metlino: work around vivado bug ( #1230 )
2019-05-19 11:27:27 +08:00
874542f33f
add Metlino support
2019-05-19 10:57:43 +08:00
hartytp
cfe1f56f73
suservo: add some more comments to the RTServoMem to clarify the RTIO interface ( #1323 )
2019-05-17 16:12:35 +01:00
fda3cb2482
kasli_generic: add edge counter support
2019-05-09 17:19:11 +08:00
ead9a42842
kasli: remove VLBAIMaster, VLBAISatellite variants
2019-05-08 15:58:25 +00:00
0c9b810501
kasli: remove PTB/PTB2/LUH/HUB variants
...
see sinara-systems and nix-scripts repos
2019-05-08 15:51:18 +00:00
1d2cc60e0d
kasli_generic: support ext_ref
2019-05-08 15:51:18 +00:00
David Nadlinger
4d215cf541
firmware: Add Si5324 config for 125 MHz ext ref
...
PLL divider settings as suggested by DSPLLsim 5.1.
2019-04-15 22:22:19 +01:00
97b7ed557b
sayma_amc: do not use SFP0 (now used for Ethernet)
2019-04-12 18:47:18 +08:00
4499ef1748
kasli: only add moninj core if there are probes to monitor
2019-03-24 14:09:52 +08:00
5d31cf2268
sayma_rtm2: si5324_clkout -> cdr_clk_clean
2019-03-23 13:48:36 +08:00
560849e693
sayma_amc: add DRTIO transceiver on rtm_amc_link for v2 hardware
2019-03-23 13:41:22 +08:00
bbb8c00518
sayma_amc: default to satellite variant
2019-03-23 13:37:55 +08:00
18fbe0b081
sayma_rtm_drtio: support v2 hardware
2019-03-23 13:31:28 +08:00
c7205ad82f
sayma_rtm: preliminary v2 support
2019-03-23 12:37:03 +08:00
33b28f6e56
sayma_amc: add placeholder code to use DDMTD signals on v2 hardware
2019-03-21 17:37:22 +08:00
2ec5a58c59
sayma_amc: si5324_clkout -> cdr_clk_clean
2019-03-21 14:09:33 +08:00
e47ba4b35e
kasli_generic: fix identifier string
2019-03-08 19:57:20 +08:00
62c7f75a9e
sayma_amc: support hardware revisions
2019-02-25 23:49:45 +08:00
d45249197c
siphaser: improve ultrascale clock routing
2019-02-25 23:00:01 +08:00
de3992bbdd
kasli: remove HUST variants (supported by kasli_generic)
2019-02-23 15:44:17 +08:00
791f830ef6
kasli_generic: support DRTIO
2019-02-23 15:41:05 +08:00
1c35c051a5
kasli: remove variants supported by generic builder
2019-02-22 23:08:49 +08:00
8edc2318ab
style
2019-02-22 17:19:20 +08:00
6ad2e13515
kasli: add generic builder (WIP)
2019-02-12 19:18:09 +08:00
ff4e4f15ed
kasli: expose base SoC classes
2019-02-12 18:33:27 +08:00
1cfd26dc2e
kasli: add UNSW variant
2019-02-08 17:51:51 +08:00
3e8fe3f29d
suservo: fix permissions
2019-02-08 14:54:02 +08:00
hartytp
87e85bcc14
suservo: fix coefficient data writing
...
Signed-off-by: Thomas Harty <thomas.harty@physics.ox.ac.uk>
2019-02-07 14:47:11 +01:00
b56c7cec1e
kasli: use 100MHz RTIO and 800MHz Urukul frequencies on Berkeley target
...
Urukul sync is not reliable at 125/1000
2019-02-05 11:24:45 +08:00
ea431b6982
sayma_rtm: use 150MHz RTIO freq for DDMTD
2019-01-31 20:43:44 +08:00
ec230d6560
sayma: move SYSREF DDMTD to the RTM
...
Put RTM Si5324 into bypass mode before running.
Needs rework to cut RTM Si5324 reset trace.
Needs rework to fix LVDS termination on RTM R310/R313 and R314/R315.
Needs uFL jumper cables between RTM "REF LO DIAG" and "CRD AUX CLKIN" (sic).
2019-01-31 20:39:33 +08:00
8119000982
sayma_rtm_drtio: use Si5324 soft reset
...
Needs easy board rework to cut trace at pin 1 of Si5324.
The Si5324 contains an internal pull-up on that pin.
Allows using Si5324 + HMC7043 chips at the same time.
Allows the Si5324 bypass hack for DDMTD experiments on the RTM.
2019-01-31 19:43:54 +08:00
d3c608aaec
jesd204sync: reset and check lock status of DDMTD helper PLL in firmware
2019-01-31 15:11:16 +08:00
c591009220
sayma: report TSC phase of SYSREF (TSC LSBs on SYSREF rising edge) in SYSREF sampler
...
Better visibility, better diagnostics, allows some changing of SYSREF frequency while keeping the same gateware.
2019-01-29 23:30:01 +08:00
9ae57fd51e
sayma: pass rtio_clk_freq to DDMTD core
2019-01-29 15:06:45 +08:00
47312e55d3
sayma: set RTIO_FREQUENCY in MasterDAC
2019-01-28 13:43:28 +08:00
443d6d8688
sayma_amc: pass RTIO clock frequency to SiPhaser
2019-01-28 09:49:03 +08:00
81b0046f98
ddmtd: add deglitchers
2019-01-27 20:38:41 +08:00
8632b553d2
ddmtd: use IOB register to sample input
2019-01-27 09:50:02 +08:00
9966e789fc
sayma: simplify Ultrascale LVDS T false path
...
Recommended by Xilinx.
2019-01-25 23:40:48 +08:00
359fb1f207
sayma: fix DDMTD STA
2019-01-25 23:39:19 +08:00
cb04230f86
sayma: SYSREF setup/hold validation demonstration
...
This also removes the standalone target as the ISERDES used
for setup/hold check requires the fine RTIO clock, which in turn
requires a DRTIO transceiver due to the Ultrascale TPWS bug.
2019-01-25 16:58:58 +08:00
3356717316
sayma: DDMTD SYSREF measurement demonstration
2019-01-25 16:00:31 +08:00
4941fb3300
sayma: 2.4GHz DAC clocking (4X interpolation)
...
* gets another clock divider out of the way
* gets one cycle within range of the HMC7043 analog delay alone
* SYSREF/RTIO alignment removed, to be replaced with DDMTD-based scheme
2019-01-25 13:47:04 +08:00
07b5b0d36d
kasli: adapt Master target to new hardware
2019-01-24 18:27:15 +08:00
154269b77a
kasli: fix HUST satellite Urukul
2019-01-23 17:59:43 +08:00
d7e6f104d2
kasli: add HUST variants
2019-01-23 14:11:51 +08:00
81f2b2c864
kasli: remove unpopulated Tester EEMs
...
* matches hardware and avoids issues with programs that process the DDB (e.g. kasli_tester)
* shortens compilation times
2019-01-23 12:14:44 +08:00
