9ee5fea88d
kasli: support optional SATA port for DRTIO
2019-01-22 18:06:48 +08:00
bff8c8cb05
kasli: add Berkeley variant
2019-01-21 17:44:17 +08:00
a2ff2cc173
sayma_amc: use more selective IOBUFDS false path
2019-01-19 11:47:50 +08:00
David Nadlinger
1c71ae636a
examples: Add edge counters to kasli_tester variant
...
This enables test_edge_counter on the CI system.
2019-01-15 10:55:07 +00:00
David Nadlinger
a565f77538
Add gateware input event counter
2019-01-15 10:55:07 +00:00
4cb9f77fd8
sayma_amc: fix Master timing constraints
2019-01-13 13:53:07 +08:00
9b213b17af
sayma_amc: forward RTM UART in Master variant as well
2019-01-09 18:57:57 +08:00
c7b18952b8
sayma_amc: work around Ultrascale LVDS Toutbuf_delay_td_pad
2019-01-09 13:47:08 +08:00
3217488824
add Sayma RTM DRTIO target
2019-01-07 00:13:47 +08:00
66b3132c28
sayma_amc: fix RTIO TSC instantiation
2019-01-06 14:54:32 +08:00
cf9447ab77
rtio/cri: remove unneeded CSR management
2019-01-05 23:40:45 +08:00
2100a8b1f1
sayma_amc: more fighting with vivado timing analyzer
2019-01-05 12:25:30 +08:00
62d7c89c48
sayma_amc: use high-resolution TTL on SMAs ( #792 )
2019-01-03 20:50:38 +08:00
0972d61e81
ttl_serdes_ultrascale: use GTH clock domains
2019-01-03 20:50:04 +08:00
f007895fad
drtio/gth_ultrascale: fix rtiox clock domain
2019-01-03 20:49:38 +08:00
10ebf63c47
jesd204_tools: get the Vivado timing analyzer to behave
2019-01-03 20:22:35 +08:00
4af8fd6a0d
ttl_serdes_ultrascale: fix Input
2019-01-03 20:14:54 +08:00
175f8b8ccc
drtio/gth_ultrascale: generate multiplied RTIO clock from BUFG_GT ( #792 )
2019-01-03 20:14:18 +08:00
77126ce5b3
kasli: use hwrev 1.1 by default for DRTIO examples
2019-01-02 23:04:20 +08:00
ab9ca0ee0a
kasli: use 150MHz for DRTIO by default (Sayma compatibility)
2019-01-02 23:03:57 +08:00
cc58318500
siphaser: autocalibrate skew using RX synchronizer
...
* removes the hardcoded, (poorly) manually determined skew value
* does not need si5324_clkout_fabric anymore (broken on Sayma RTM due to wrong IO voltage)
2019-01-02 22:29:27 +08:00
f5cda3689e
sayma_amc: enable DRTIO on master SATA connector for MasterDAC variant
2019-01-02 16:46:16 +08:00
6df4ae934f
eem: name the servo submodule
...
This allows the migen namer to derive names for the ADC return clock
domain in the case of multiple SUServos
close #1201
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-12-11 11:36:40 +01:00
7e14f3ca4e
compiler,gateware: atomic now stores
2018-12-02 05:06:46 +08:00
c56c0ba41f
rtio/dds: use write-only RT2WB
...
This saves one address bit and prevents issues with AD9914 and 8-bit addresses.
2018-11-26 07:38:15 +08:00
09141e5bee
rtio/wishbone: support write-only interface
2018-11-26 07:38:06 +08:00
450a035f9e
suservo: move overflowing RTIO address bits into data
2018-11-26 06:54:20 +08:00
ae8ef18f47
rtlink: sanity-check parameters
2018-11-26 01:14:02 +08:00
53e79f553f
Merge branch 'master' into new
2018-11-19 11:54:50 +08:00
78d4b3a7da
gateware/targets: expose variant lists
...
This allows writing scripts that build all variants.
2018-11-17 22:10:20 +08:00
1b841805f6
Merge branch 'master' into new
2018-11-16 15:20:32 +08:00
2af6edb8f5
eem: fix reset/sync in suservo
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-13 13:00:54 +00:00
1f7858b80b
test/dsp: fix rtio_output
2018-11-09 22:11:44 +08:00
e509ab8553
test/dsp: use absolute import path
...
Avoids "ImportError: attempted relative import with no known parent package"
when doing a simple "python -m unittest test_XXX.py".
2018-11-09 22:10:46 +08:00
c990b5e4f1
Merge remote-tracking branch 'origin/master' into new
2018-11-08 20:21:56 +08:00
f74dda639f
drtio: 8-bit address
2018-11-08 18:36:20 +08:00
8caea0e6d3
gateware,runtime: optimize RTIO kernel interface further
...
* now pinning (TODO: atomicity)
* for inputs, merge request and timeout registers
2018-11-08 18:29:24 +08:00
aadf5112b7
rtio: remove incorrect comment
2018-11-08 00:02:44 +08:00
3d0c3cc1cf
gateware,runtime: optimize RTIO output interface
...
* reduce address to 8 bits
* merge core, channel and address into 32-bit pre-computable "target"
* merge we register into data register
2018-11-07 23:39:58 +08:00
ad0254c17b
Merge branch 'switching125' into new
2018-11-07 22:03:18 +08:00
efd735a6ab
Revert "drtio: monitor RTIOClockMultiplier PLL ( #1155 )"
...
This reverts commit 469a66db61
2018-11-07 22:01:03 +08:00
ba4bf6e59b
kasli: don't pass rtio pll feedback through bufg
...
UG472: "The MMCM performance increases because the
feedback clock is not subjected to noise on the core supply since it
never passes through a block powered by this supply."
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-06 11:58:55 +00:00
b6e4961b0f
kasli: lower RTIO clock jitter
...
* high bandwidth since the si5324 is good
* no low power ibufgds
* drop bufg between ibufgds and pll
* increase pll vco frequency to 1.5 GHz
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-06 11:43:19 +00:00
e17e458c58
ptb2: add sync to urukul0 for ad9910 usage
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-06 10:06:51 +00:00
31f68ddf6c
Merge branch 'urukul-sync'
...
* urukul-sync: (29 commits)
urukul: flake8 [nfc]
ad9910: flake8 [nfc]
urukul/ad9910 test: remove unused import
test_urukul: relax speed
urukul,ad9910: print speed metrics
kasli: add PTB2 (external clock and SYNC)
kasli: add sync to LUH, HUB, Opticlock
kasli_tester: urukul0 mmcx clock defunct
test_ad9910: relax ifc mode read
tests: add Urukul-AD9910 HITL unittests including SYNC
ad9910: add init bit explanation
test: add Urukul CPLD HITL tests
ad9910: fiducial timestamp for tracking phase mode
ad9910: add phase modes
ad9910: fix pll timeout loop
tester: add urukul sync
ptb: back out urukul-sync
ad9910: add IO_UPDATE alignment and tuning
urukul: set up sync_in generator
ad9910: add io_update alignment measurement
...
close #1143
2018-11-05 19:54:30 +01:00
32d538f72b
kasli: add PTB2 (external clock and SYNC)
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-05 19:37:16 +01:00
d8a5951a13
kasli: add sync to LUH, HUB, Opticlock
...
for #1143 , also add missing LUH device db
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-05 19:37:14 +01:00
4269d5ad5c
tester: add urukul sync
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-05 19:36:52 +01:00
60d3bc63a7
ptb: back out urukul-sync
...
... for backwards compatibility.
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-05 19:36:50 +01:00
3538444876
urukul: add sync_in to eem0-7 name
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-05 19:36:32 +01:00
0433e8f4fe
urukul: add sync_in generator
...
for #1143
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-05 19:36:30 +01:00
bc4a8157c0
kasli: add tsinghua2
2018-11-01 18:26:37 +08:00
48a142ed63
use FutureWarning instead of DeprecationWarning
...
DeprecationWarning is disabled by default and too easy to ignore.
2018-10-21 12:14:51 +08:00
6357a50d33
kasli: update nudt variant
2018-10-15 18:04:57 +08:00
469a66db61
drtio: monitor RTIOClockMultiplier PLL ( #1155 )
...
Debugging by Tom Harty
2018-10-08 14:50:02 +02:00
86fe6b0594
kasli: add NUDT variant
2018-10-04 23:20:09 +08:00
a89bd6b684
kasli: swap Urukul EEMs for Tester
...
Updated to Urukul 1.3.
2018-10-04 23:19:31 +08:00
9f96b6bcda
kasli: use 125MHz DRTIO freq for testing
2018-10-04 10:41:01 +08:00
969a305c5a
Merge branch 'master' into switching125
2018-10-04 10:08:42 +08:00
d0ee2c2955
opticlock: external 100 MHz
2018-09-28 19:05:18 +02:00
3b3fddb5a4
kasli: add mitll2
2018-09-27 23:21:52 +08:00
b92350b0f6
drtio: monitor RTIOClockMultiplier PLL ( #1155 )
...
Debugging by Tom Harty
2018-09-26 10:52:08 +08:00
212892d92f
style
2018-09-26 10:13:33 +08:00
73f0de7c79
sayma: DRTIO master fixes
2018-09-20 11:15:45 +08:00
53a979e74d
rtio: cleanup resets
2018-09-20 10:58:38 +08:00
251d90c3d5
drtio: clear read request in satellite only after reply has been fully sent
...
Otherwise, chan_sel become invalid before the end of the packet, which
can cause the interconnect to invalidate i_timestamp and i_data which results
in corruption of the end of the packet.
2018-09-20 08:53:45 +08:00
69d060b639
drtio: fix satellite i_status handling
2018-09-19 20:57:21 +08:00
b86b6dcc09
drtio: add switching input test
2018-09-19 17:50:29 +08:00
08be176369
drtio: fix satellite i_status handling
2018-09-19 17:50:18 +08:00
3d965910f7
Revert "drtio: implement per-destination underflow margins"
...
This reverts commit 142c952e3d
2018-09-19 17:05:48 +08:00
142c952e3d
drtio: implement per-destination underflow margins
2018-09-19 17:03:15 +08:00
970d1bf147
drtio: add switching unittest
2018-09-18 15:27:52 +08:00
eda15a596c
drtio: add buffering to repeater
2018-09-18 15:27:25 +08:00
2b44786f73
drtio: add repeater input support
2018-09-17 23:45:27 +08:00
d38755feff
drtio: implement destination state checks on operations
2018-09-15 15:55:45 +08:00
cd61ee858c
kasli: fix satellite TSC instantiation
2018-09-15 14:06:54 +08:00
1ef39a98a7
drtio: implement per-destination buffer space
2018-09-13 16:16:32 +08:00
0befec7d26
drtio: improve repeater error reports
2018-09-12 20:54:01 +08:00
420e1cb1d0
cri: fix firmware routing table access
2018-09-12 18:08:16 +08:00
5bcd40ff59
cri: fix routing table depth
2018-09-12 17:30:55 +08:00
edf403b837
drtio: improve error reporting
2018-09-12 15:44:34 +08:00
95432a4ac1
drtio: remove old debugging features
2018-09-12 13:01:27 +08:00
41972d6773
drtio: rt_packet_satellite CRI fixes
2018-09-11 22:19:55 +08:00
051bafbfd9
drtio: ensure 2 cycles between frames on the link
...
This gives time for setting chan_sel before cmd on CRI.
2018-09-11 22:18:42 +08:00
251b9a2b0d
drtio: do not lock up master when satellite repeatedly fails to answer buffer space reqs
2018-09-11 22:17:57 +08:00
7ec45efdcf
kasli: add missing cri_con to Satellite
2018-09-10 20:16:09 +08:00
7ae44f3417
firmware: add routing table (WIP)
2018-09-09 21:49:28 +08:00
496d1b08fd
kasli: enable routing in Master
2018-09-09 21:48:12 +08:00
ec302747e0
kasli: add DRTIO repeaters
2018-09-09 16:27:39 +08:00
d5577ec0d0
cri: add routing table support
2018-09-09 16:26:48 +08:00
df61b85988
drtio: fix imports
2018-09-09 14:11:32 +08:00
312256a18d
grabber: fix frame size off-by-1
2018-09-07 16:55:43 +02:00
ec62eb9373
drtio: minor cleanup
2018-09-07 17:51:38 +08:00
4d73fb5bc9
grabber: only advance when DVAL
2018-09-06 11:01:08 +02:00
87e0384e97
drtio: separate aux controller
...
This helps with managing CSR groups and heterogeneous (satellite/repeaters) DRTIO cores.
2018-09-05 17:56:58 +08:00
92be9324df
add missing files
2018-09-05 16:09:02 +08:00
2884d595b3
drtio: add rt_controller_repeater
2018-09-05 16:08:40 +08:00
839f748a1d
drtio: add external TSC to repeater
2018-09-05 15:55:20 +08:00
5f20d79408
drtio: add timeout on satellite internal CRI buffer space request
2018-09-05 14:12:11 +08:00
1450e17a73
sayma: adapt to TSC and DRTIOSatellite changes
2018-09-05 12:10:41 +08:00
