Commit Graph

89 Commits

Author SHA1 Message Date
morgan 53cb592d19 kasli soc: add rtio_frequency cfg for runtime 2024-05-08 16:14:56 +08:00
morgan 1d603c73b7 DDMTD: replace 1st edge to median edge deglitcher 2024-04-29 13:05:02 +08:00
morgan 3f57de6ec7 DDMTD: replace FD with ISERDESE2 2024-04-29 13:03:30 +08:00
morgan 2bbaea3ad5 SMAFreqMulti: set mmcm bw to HIGH for lower jitter 2024-04-29 11:20:50 +08:00
mwojcik 92a29051f7 drtio_aux_controller: support aux_buffer_count 2024-04-24 17:12:39 +08:00
morgan 7827c7b803 Gateware: kasli_soc WRPLL setup
kasli_soc: use enable_wrpll from json to switch from si5324 to si549
kasli_soc: add wrpll for all variants
kasli_soc: add gtx & main tag nFIQ for all variants
kasli_soc: add clk_synth_se for master & satellite
kasli_soc: add wrpll_refclk for runtime
kasli_soc: add skewtester for satman
kasli_soc: add WRPLL_REF_CLK config for firmware
2024-04-11 15:18:10 +08:00
morgan e4d8d44c7c Gateware: WRPLL
ddmtd: add DDMTD and deglitcher
wrpll: add helper clockdomain
wrpll: add frequency counter
wrpll: add skewtester
wrpll: add gtx & main tag collection
wrpll: add gtx & main tag eventmanager for shared peripheral interrupt
wrpll: add SMA frequency multiplier to generate 125Mhz refclk
si549: add i2c and adpll programmer
2024-04-11 15:18:04 +08:00
linuswck e1b2c45813 kasli_soc & zc706: Fix GTX Clock Path during INIT 2023-11-07 18:55:08 +08:00
linuswck e6372b9766 zynq_clocking: Allow ext signal to set cur_clk csr
- for example, current_clock csr can be connected to tx_init.done
2023-11-07 18:55:08 +08:00
linuswck 07044752b6 zynq_clocking: add ext_async_rst to AsyncRstSYNCR 2023-11-07 18:55:08 +08:00
linuswck 79fc5a7789 zynq_clocking: expose mmcm_locked for SYSCRG
- mmcm_locked -> self.mmcm_locked
2023-11-07 18:55:08 +08:00
Egor Savkin b768d5648c Add grabber module
Signed-off-by: Egor Savkin <es@m-labs.hk>
2023-10-16 14:35:20 +08:00
linuswck 136e24f597 kasli-soc: Add BUFG to the IBUFGDS for MMCM CLKIN1
- Fix Vivado Compilation Error [DRC REQP-119]
- MMCME2_ADV CLKIN1 and CLKIN2 are now driven from the same source type (BUFG)
2023-10-11 16:45:26 +08:00
linuswck b15322b6ba kasli_soc: Add support for shuttler on gateware
- Port from artiq repo
- Add EEM_DRTIO gateware
2023-10-10 11:22:05 +08:00
linuswck 8fd1306145 zynq_clocking: Add sys5x, 208MHz CLK & IDELAYCTRL
- Port from artiq repo
- Generate sys5x for for EEM Serdes, 208MHz REF Clock for IDELAYCTRL
- Add IDELAYCTRL for IDEALYE2 in EEM Serdes
2023-10-10 11:21:34 +08:00
mwojcik 49205eea17 satellite gateware: add kernel rtio to cri 2023-10-09 11:36:23 +08:00
sven-oxionics 656cbf4546 kasli_soc: use sed_lanes value from HW description
https://github.com/m-labs/artiq/pull/1745 added a field for setting the number of SED lanes to the HW description. This commit makes it so that the setting is used for Kasli Soc as well.
2023-10-06 15:37:56 +01:00
mwojcik ae3099dd8e kasli_soc: support 100MHz clock 2023-10-06 16:27:25 +08:00
morgan b3856e879b refactor `write_rustc_cfg_file()` 2023-09-11 11:48:19 +08:00
morgan 1ccae0d442 consolidate all `write..file()` into `config.py` 2023-09-11 11:48:19 +08:00
morgan 2c19f4ac31 replace rustc_cfg[ ] & change write_rustc_cfg_file 2023-09-11 11:48:19 +08:00
MorganTL 0e6309b95e change write_rustc_cfg_file to follow artiq repo 2023-08-30 14:56:12 +08:00
morgan 622d267d55 add virtual LEDs, improve IO expander setup, drive TX_DISABLE
Co-authored-by: morgan <mc@m-labs.hk>
Co-committed-by: morgan <mc@m-labs.hk>
2023-08-28 16:08:10 +08:00
linuswck 4ae8557018 drtio: remame drtio_transceiver to gt_drtio
Co-authored-by: linuswck <linuswck@m-labs.hk>
Co-committed-by: linuswck <linuswck@m-labs.hk>
2023-08-28 13:05:40 +08:00
Sebastien Bourdeauducq ca17cd419e Revert "kasli_soc: add SFP0..3 LED indication"
This reverts commit 5111778363.
2023-08-03 10:42:09 +08:00
morgan 5111778363 kasli_soc: add SFP0..3 LED indication
Co-authored-by: morgan <mc@m-labs.hk>
Co-committed-by: morgan <mc@m-labs.hk>
2023-07-24 16:30:14 +08:00
Sebastien Bourdeauducq ee438105b2 json: base -> drtio_role 2023-06-16 17:03:25 +08:00
Denis Ovchinnikov 63594d7e3d update configuration of IBUFDS_GTE2
Input clock is terminated internally with 50 Ohm on each leg and to 4/5 MGTAVCC.
2023-05-30 12:08:41 +08:00
mwojcik ad076dd4e9 zc706: fix satellite analyzer target 2023-05-24 09:52:16 +08:00
mwojcik c536a70890 satellite gateware: add rtio analyzer 2023-05-22 15:23:24 +08:00
mwojcik b747abe83c qc2: add 4 edge counters to the end of rtio 2023-04-03 12:25:07 +08:00
mwojcik 4b1ce1a6ff satellites: add rtio_dma, connect as cri master 2023-03-21 15:54:58 +08:00
mwojcik dce37a52aa KasliSoC satellite: fix serdes timing 2023-02-20 13:07:42 +08:00
mwojcik 46b2687d70 RTIO/SYS Clock merge
Co-authored-by: mwojcik <mw@m-labs.hk>
Co-committed-by: mwojcik <mw@m-labs.hk>
2023-02-17 15:52:43 +08:00
mwojcik 19e60073de kasli_soc: ident = variant name 2022-10-21 11:55:24 +08:00
mwojcik efc432352e zc706: no syncrtio for master, fixes hangs (#188) 2022-05-03 14:36:10 +08:00
mwojcik def4d989cd kasli_soc: fix si5324 pins routed to GTX 2022-04-25 12:33:21 +08:00
mwojcik 1d731a3589 zc706 master: route sma clock to si5324 2022-04-13 16:35:52 +08:00
mwojcik 3cf86a6335 satellites: add rtio_crg cfg 2022-04-12 13:44:53 +08:00
occheung a22b13cc46 kasli_soc: forward SMA clkin 2022-03-09 12:43:47 +08:00
spaqin 85e5c08d7f kasli_soc: use si5324 in master 2022-03-04 13:17:53 +08:00
mwojcik 31fb2b388a Support for DRTIO 100MHz (#155)
Co-authored-by: mwojcik <mw@m-labs.hk>
Co-committed-by: mwojcik <mw@m-labs.hk>
2021-12-03 17:19:42 +08:00
mwojcik e045837b67 zc706: not actually ultrascale 2021-11-29 12:48:45 +08:00
mwojcik ada3f2e704 drtio: reading still needs work buffer after all 2021-11-29 12:46:08 +08:00
mwojcik 8be5048cd3 upgrade to new clock configuration system (#152)
As mentioned in https://github.com/m-labs/artiq/issues/1735 - this is the Zynq version.

Reviewed-on: M-Labs/artiq-zynq#152
Co-authored-by: mwojcik <mw@m-labs.hk>
Co-committed-by: mwojcik <mw@m-labs.hk>
2021-11-29 11:17:59 +08:00
mwojcik 0b27349ec4 dummy_spi -> pmod_spi 2021-10-14 16:37:13 +08:00
mwojcik 21eb1cab1a zc706: added dummy spi in place of sdio 2021-10-14 15:43:51 +08:00
mwojcik 3096daaaee zc706: removed nist_clock sdcard, put pmod instead 2021-10-14 15:01:38 +08:00
mwojcik 4fbfccf575 zc706: fix nist_qc2 extension, ams101 iostandard 2021-10-14 12:39:09 +08:00
mwojcik 5c40115945 make ZC706 RTIO channels consistent with KC705
Reviewed-on: M-Labs/artiq-zynq#147
Co-authored-by: mwojcik <mw@m-labs.hk>
Co-committed-by: mwojcik <mw@m-labs.hk>
2021-10-13 17:20:25 +08:00