7213cfb1f8
flake: update dependicies (fix rebase)
2024-09-30 08:37:50 -07:00
db22dafe28
Update EMIO to Emio
2024-09-27 18:55:32 -07:00
8f2dc94cf8
Re-introduce deleted whitespace
2024-09-25 19:28:47 -07:00
f2eebf44e9
Review update
2024-09-24 23:24:50 -07:00
41f780e118
Clean up branch
2024-09-23 13:39:11 -07:00
c3d92abe99
Update eth/mod.rs
2024-09-23 11:25:41 -07:00
6c3d901f00
Create EMIO PLLSource
2024-09-20 15:23:46 -07:00
bb76c13ee0
Remove cfg for eth
2024-09-05 22:31:42 -07:00
eae21579bc
More updates. Fixed openocd.
2024-09-04 16:05:55 -07:00
a75568bd42
EBAZ4205 Initial commit
2024-08-13 14:01:46 -07:00
4168eb63a7
GIC: fix wrong core target config when enabling interrupt ( #109 )
...
# Summary
- Before the patch, an extra 1 is added to `target_cpu` and the interrupt will be configured to the wrong CPU target.
| target_cpu | bits set before patch | bits set after patch |
| -----------| ----------- | ----------- |
| core0 | 0b10 (enable interrupt on core1) | 0b01 (enable interrupt on core0) |
| core1 | 0b11 (enable interrupt on core0 & core1)| 0b10 (enable interrupt on core1) |
- [Correct ICDIPTR Register configuration from AMD](https://docs.xilinx.com/r/en-US/ug585-zynq-7000-SoC-TRM/Software-Generated-Interrupts-SGI?tocId=0TsxAmy8MHRPDsayG96K1Q )
Reviewed-on: M-Labs/zynq-rs#109
Co-authored-by: morgan <mc@m-labs.hk>
Co-committed-by: morgan <mc@m-labs.hk>
2023-12-19 18:41:03 +08:00
0106430805
remove gpio reset
2023-10-18 17:33:19 +08:00
jmatyas
c15b54f92b
kasli-soc: add support for PHY_RST GPIO
2023-08-31 12:58:59 +02:00
0a3a777652
Fix soft_rst bit, add reboot function
2022-10-07 12:57:56 +08:00
42cc256812
add error led
2022-08-26 17:22:42 +08:00
1c8e2c318c
eth phy: reset page to 0 on kasli-soc for ident
2022-03-10 17:11:41 +08:00
c4c52c33b4
eth phy: use unreachable!() for impossible values
2022-03-10 16:45:29 +08:00
072fd5f015
eth phy: set LEDs only on Kasli-SoC
2022-03-10 16:42:25 +08:00
2b3c7e4b2f
eth leds:
...
* break led0 from led1 - similar, but not the same settings (led2 not implemented)
* fix values, make it compilable
* set default behavior (one led for link, other for activity)
2022-03-10 16:42:25 +08:00
84d6d391ce
libboard_zynq: eth phy for Marvell 88E1518
...
* add support for LED control registers
* support for registers on different pages
2022-03-10 16:42:25 +08:00
3e95df1f64
pca954x_select: api supports no channel enabled
2022-02-11 13:46:51 +08:00
26ab2927b9
pca954x: log detected type
2022-02-11 12:00:39 +08:00
dacc816eb4
pca954x: improve code, fix I2C_SW_RESET behavior
2022-02-11 11:22:53 +08:00
14b0247716
pca954x: fix to work on cold boot
2022-02-09 17:23:33 +08:00
bc41b91192
adjust pca address
2022-02-08 16:39:12 +08:00
3efc682bd6
add pca954x autodetection, pca9547 support
2022-02-08 15:40:17 +08:00
2c161720fa
revert a11cb852a8
2021-07-05 13:45:22 +08:00
a42e5a95ff
phy: fix issue 78, scan PHY MDIO addr starting at 0
2021-07-05 13:25:22 +08:00
b0ec74d764
i2c: half_period -> unit_delay
2021-06-25 16:26:53 +08:00
4159aab6c8
i2c: conservative timing, avoid SCL/SDA races. Closes #83
2021-06-25 16:26:04 +08:00
d18c77c0eb
i2c: fix error messages
2021-06-25 16:23:50 +08:00
411eebd96c
i2c: configure I2C_SW_RESET MIO on Kasli-SoC
2021-06-19 18:49:51 +08:00
a11cb852a8
libboard_zynq: work around Kasli-SoC MDIO breakage ( #78 )
2021-05-29 12:50:28 +08:00
bf9f1e33c8
update smoltcp 0.6.0 -> 0.7.0
2021-02-04 18:29:00 +01:00
05c30dd52e
Revert "update smoltcp 0.6.0 -> 0.7.0"
...
This reverts commit ccf758cc85
2021-02-04 18:27:42 +01:00
f816a04cef
Revert "Revert "update smoltcp 0.6.0 -> 0.7.0""
...
This reverts commit faa64c2ce8
2021-02-04 16:22:39 +01:00
faa64c2ce8
Revert "update smoltcp 0.6.0 -> 0.7.0"
...
This reverts commit ccf758cc85https://github.com/smoltcp-rs/smoltcp/issues/415
2021-02-04 16:22:16 +01:00
ccf758cc85
update smoltcp 0.6.0 -> 0.7.0
2021-02-03 22:41:32 +01:00
1cd4056370
libboard_zynq: remove unused eth phy name information
2020-11-20 17:21:38 +01:00
ddff295ae1
libboard_zynq: implement eth hot-plugging
2020-11-20 17:12:22 +01:00
379b6b973a
libboard_zynq: add support for target_kasli_soc's Marvell88E1512 eth phy
2020-11-19 20:38:10 +01:00
3172aba1a8
libboard_zynq: improve i2c doc
2020-11-19 20:26:48 +01:00
975202a653
libboard_zynq: enable i2c+eeprom for target_kasli_soc
2020-11-19 20:17:36 +01:00
a3eabf1947
libboard_zynq: prepare target_kasli_soc
2020-11-19 19:28:17 +01:00
a32d7abb9a
libboard_zynq: rename ddr DCI_FREQ to DCI_MAX_FREQ
2020-11-19 19:21:38 +01:00
0714162113
rename target_cora_z7_10 to target_coraz7 globally
2020-11-13 17:56:47 +01:00
5b2c779cba
libboard_zynq: delint ps7_init
2020-11-13 00:23:56 +01:00
0a40d4f36d
libboard_zynq: fix zc706 build
2020-11-13 00:23:38 +01:00
55f8d02da8
libboard_zynq: remove ddr-only ps7_init for redpitaya
2020-11-13 00:12:43 +01:00
990fa56d6a
libboard_zynq: complete ddr without ps7_init for redpitaya
2020-11-13 00:10:34 +01:00
