Commit Graph

220 Commits

Author SHA1 Message Date
atse 9df0fe406f Remove VREF in reports
Since VREF is an implementation detail, there shouldn't be a need to
include it in reports.

The ChannelState vref is removed along with it as its only use was to
save VREF measurements for later reporting.
2023-08-22 11:40:42 +08:00
atse 6f0acc73b8 Update LED L3 for PID status on every cycle
Check if PID is engaged on any channel every cycle, and match the status
with LED L3.
2023-08-10 16:43:19 +08:00
atse b04a61c414 Turn off LED L3 only when all channels have no PID
Change the behaviour of LED L3 to turn off only when all channels have
PID disengaged, as opposed to when any channel disengages PID.

Otherwise, when disengaging PID on a Thermostat that has had both
channels engaged in PID, the LED would turn off, even when PID is still
engaged on the other channel.

This lets the LED better reflect the status of the Thermostat as a
whole, as it would stay on as long as PID is engaged on at least one
channel.
2023-08-07 16:09:54 +08:00
Egor Savkin 570c0324b3 implement support for fan PWM
Co-authored-by: Egor Savkin <es@m-labs.hk>
Co-committed-by: Egor Savkin <es@m-labs.hk>
2023-03-22 17:15:49 +08:00
mwojcik 1b2f2f3888 update code to use stm32f4xx-hal 0.10.1 API 2022-03-02 17:21:17 +08:00
topquark12 26ad2f0119 rewrite PID
Rewrite of PID according to https://hackmd.io/IACbwcOTSt6Adj3_F9bKuw PID implementation.

To migrate:
- TEC+/- pin polarity has to be reversed.
- Some saved settings might be wiped upon flashing of new firmware, back up settings before upgrade
- Min / Max integral parameters no longer exist
- kp, ki, kd will likely need to be retuned

The software has been tested on hardware with good temperature control stability.

Reviewed-on: M-Labs/thermostat#68
Co-authored-by: topquark12 <aw@m-labs.hk>
Co-committed-by: topquark12 <aw@m-labs.hk>
2022-02-24 20:16:47 +08:00
topquark12 e6a5c31db6 main.rs refactor to reduce length (#60)
Move command handling to command_handler.rs to shorten main.rs

Reviewed-on: M-Labs/thermostat#60
Co-authored-by: topquark12 <aw@m-labs.hk>
Co-committed-by: topquark12 <aw@m-labs.hk>
2021-06-07 10:07:05 +08:00
topquark12 a5d8661b10 main: fix handling of incomplete data received (#55)
Reviewed-on: M-Labs/thermostat#55
Co-Authored-By: topquark12 <aw@m-labs.hk>
Co-Committed-By: topquark12 <aw@m-labs.hk>
2021-01-29 16:18:07 +08:00
topquark12 7cb0ed70be Reset all TCP sockets before MCU reset (#53)
Co-Authored-By: topquark12 <aw@m-labs.hk>
Co-Committed-By: topquark12 <aw@m-labs.hk>
2021-01-26 17:45:14 +08:00
topquark12 16844a1dc1 dac: fix inconsistent current output behavior due to repeated sampling of noisy vref 2021-01-25 13:51:50 +08:00
Sebastien Bourdeauducq 8eb3cc4307 dfu: style 2021-01-18 16:59:13 +08:00
topquark12 f3661ac8e3 dfu: refactor 2021-01-18 16:45:01 +08:00
topquark12 c4e3be1d05 fix pid.rs test, exclude dfu from test 2021-01-16 11:04:24 +08:00
topquark12 cf3ace4d2d flash_store: get addresses from linker
Reviewed-on: M-Labs/thermostat#49
Co-Authored-By: topquark12 <aw@m-labs.hk>
Co-Committed-By: topquark12 <aw@m-labs.hk>
2021-01-13 17:30:12 +08:00
topquark12 f6802635a4 add command to reboot into DFU
Co-Authored-By: topquark12 <aw@m-labs.hk>
Co-Committed-By: topquark12 <aw@m-labs.hk>
2021-01-13 11:59:06 +08:00
topquark12 9e4d06fdbc clarify comment 2021-01-11 16:24:43 +08:00
topquark12 3433881d0f remove dead code 2021-01-11 14:10:50 +08:00
topquark12 193d54a0a6 pid: anti-windup when compliance voltage reached 2021-01-11 14:00:52 +08:00
topquark12 3067b356c5 channels: add methods to retrieve actual voltage and current of TEC 2021-01-08 16:18:20 +08:00
topquark12 3ba2cc9ddc channels: voltage measurement refalect actual voltage across TEC 2021-01-08 15:52:35 +08:00
topquark12 1539b624bd pid: more sensible default parameters 2021-01-08 11:31:33 +08:00
topquark12 5c84b7438b Integral rescaling 2021-01-08 11:25:01 +08:00
topquark12 cc0126636c report save success
save does not hang, it just did not report save success. Closes #33

Reviewed-on: M-Labs/thermostat#44
Co-Authored-By: topquark12 <aw@m-labs.hk>
Co-Committed-By: topquark12 <aw@m-labs.hk>
2021-01-07 18:01:43 +08:00
topquark12 e94601f54f pid: fix derivative calculation
Reviewed-on: M-Labs/thermostat#40
Co-Authored-By: topquark12 <aw@m-labs.hk>
Co-Committed-By: topquark12 <aw@m-labs.hk>
2020-12-29 17:09:03 +08:00
topquark12 8c9e12587f fix simulation math, provided simulation control loop is stable and passes test, reaching simulation cycle limit before settling fails test 2020-12-28 17:38:10 +08:00
topquark12 7c013ff4a4 PID fixes
Flipped error calculation method to correct behavior of kP and kI terms.

Added anti integral windup to integral handling.

Changed how the i and integral term is calculated, to prevent old kI settings from affecting the current i term calculation when kI is being tuned. Especially noticable when kI is set from a non-zero value to zero.
Co-Authored-By: topquark12 <aw@m-labs.hk>
Co-Committed-By: topquark12 <aw@m-labs.hk>
2020-12-26 11:47:21 +08:00
Sebastien Bourdeauducq 50a1b9f52d pid: partial -> proportional 2020-12-26 11:01:40 +08:00
Astro 9852b32646 command_parser, main: implement ShowCommand::Ipv4
Fixes Gitea issue #30
2020-12-20 20:44:10 +01:00
Astro 22b0c9fcad main: don't re- set_ipv4_config every tick 2020-12-20 20:43:20 +01:00
Astro e13ed37271 pid: fix tests 2020-12-20 20:24:24 +01:00
Astro b176fc2788 pid: doc parameters 2020-12-18 16:29:53 +01:00
Astro b717ac5495 pid: update default gain parameters 2020-12-18 16:27:47 +01:00
Astro e9e46b29cf pid: integrate time_delta to free gain parameters from sampling period
Fixes Gitea issue #22
2020-12-18 15:40:05 +01:00
Astro b7e6cdbec2 pytec: measure interval 2020-12-16 22:14:21 +01:00
Astro b2f455b2cf config: save/store pid_engaged
Fixes Gitea issue #17
2020-12-13 02:33:59 +01:00
Astro ecc00a6aeb init_log: delint 2020-12-13 02:24:29 +01:00
Astro 97813f917d flash_store: get to a working state 2020-12-13 01:17:03 +01:00
Astro 880a887c40 new flash-based ipv4 config with additional mask_len, gateway 2020-12-12 23:44:16 +01:00
Astro 383ebcd8e4 rewrite config for sfkv-based flash_store 2020-12-12 01:25:07 +01:00
Astro 5c8bb47e11 command_parser: require the explicit `i_set` symbol 2020-12-09 01:07:08 +01:00
Astro 5ddd4d250e channels: swap adc inputs
Fixes Gitea issue #12
2020-12-07 00:22:00 +01:00
Astro ffb70bde0a command_parser: fix input_remain match 2020-10-30 15:04:14 +01:00
Astro d517dd75fe update dependencies 2020-10-30 15:03:57 +01:00
Astro a943308203 pid: never reset 2020-10-13 23:55:22 +02:00
Astro c005784df5 steinhart_hart: rm outdated doc 2020-10-11 23:20:56 +02:00
Astro d574ccb5f4 pid: change signedness from heating to cooling 2020-10-11 23:12:18 +02:00
Astro 6ba1459a3c main: send error on invalid command 2020-10-11 23:11:27 +02:00
Astro a332b5fcdc main: fix saving new_ipv4_address 2020-10-11 01:59:39 +02:00
Astro 83a266852a pid: move ki coefficient inside integration 2020-10-11 01:59:39 +02:00
Astro 175b88d0e6 s/tecpak/thermostat/g 2020-10-11 01:59:39 +02:00