thermostat

wrong current reports

#99 by esavkin was closed 2024-04-24 18:05:20 +08:00

1

Channel 1 setting current doesn't work

#100 by esavkin was closed 2024-03-08 12:38:53 +08:00

1

Make option for swapping the TEC polarity persistent

#98 by esavkin was closed 2024-03-08 11:44:33 +08:00

1

test Zotino DAC temperature stabilization

#57 by sb10q was closed 2022-01-19 11:28:49 +08:00

5

build fails

#61 by hartytp was closed 2022-01-05 08:09:26 +08:00

6

check that firmware starts with USB cable disconnected from PC

#58 by sb10q was closed 2021-06-07 10:01:02 +08:00

1

README.md not-ready-for-lab-use warning

#23 by jbqubit was closed 2020-12-09 08:18:58 +08:00

5

possible TEC current spike on startup

#56 by sb10q was closed 2021-02-11 10:59:07 +08:00

1

client.py report_mode may yield empty object

#42 by topquark12 was closed 2021-01-29 16:18:08 +08:00

4

close TCP connections before network-initiated reset

#47 by sb10q was closed 2021-01-26 17:45:20 +08:00

review (firmware-hardware) vs (Thermostat design goals)

#24 by jbqubit was closed 2021-01-25 20:23:25 +08:00

5

code review

#38 by sb10q was closed 2021-01-25 19:55:22 +08:00

4

get FLASH_SECTOR_OFFSET from linker script

#48 by sb10q was closed 2021-01-13 17:30:19 +08:00

software activation of boot-into-DFU mode

#26 by jbqubit was closed 2021-01-13 11:59:22 +08:00

2

enable anti integral windup when compliance voltage is reached

#37 by sb10q was closed 2021-01-11 20:30:43 +08:00

2

save hangs

#33 by jbqubit was closed 2021-01-07 18:02:05 +08:00

2

add basic setup instructions to doc

#39 by sb10q was closed 2021-01-07 15:12:48 +08:00

1

loop servo time step / PID autotune

#11 by jbqubit was closed 2021-01-06 11:28:19 +08:00

19

M-Labs TEC with 10K RTD

#32 by jbqubit was closed 2020-12-25 09:25:56 +08:00

6

pytec regression get_pwm()

#31 by jbqubit was closed 2020-12-28 17:49:12 +08:00

4

Labels Milestones