 Sebastien Bourdeauducq
|
68e2b4634f
|
adapt OpenOCD script
|
2019-08-21 17:00:13 +08:00 |
 Astro
|
82b6e8e179
|
main: rm stale coda, poll adc, broadcast over tcp
|
2019-08-08 02:26:53 +02:00 |
|
Astro
|
057ddbdbf6
|
add ad7172 adc
|
2019-08-08 02:26:53 +02:00 |
|
Astro
|
4437a4195e
|
delay: is unsafe
|
2019-08-08 02:26:53 +02:00 |
|
Astro
|
44f48f6e0f
|
main: construct softspi
|
2019-08-08 02:26:53 +02:00 |
|
Astro
|
9c7ca0df87
|
add board::delay
|
2019-08-08 02:26:53 +02:00 |
|
Astro
|
f04bbd8726
|
softspi: add SyncSoftSpi
|
2019-08-08 02:26:53 +02:00 |
|
Astro
|
4bf52b093e
|
implement softspi
|
2019-08-08 02:26:53 +02:00 |
|
Astro
|
5f3d674e24
|
add gpio abstraction
|
2019-07-30 18:25:35 +02:00 |
|
Astro
|
e4478c3efd
|
timer setup
|
2019-07-30 17:02:05 +02:00 |
|
Astro
|
2ac3485b30
|
dismantle ionpak, drive PWMs at fixed rate
|
2019-07-30 15:35:56 +02:00 |
whitequark
|
517e531589
|
Update for Rust 1.32, and upgrade dependencies.
|
2019-02-06 09:19:28 +00:00 |
|
whitequark
|
89104a551c
|
Update for latest nightly.
|
2018-08-28 19:57:17 +00:00 |
|
whitequark
|
941f602a20
|
Use the crc crate.
|
2018-03-27 10:16:11 +00:00 |
|
whitequark
|
6ffb157cb8
|
Add Cache-Control header for static assets.
This avoids wasting device cycles on retrieving the same data over
and over.
|
2018-03-27 09:36:16 +00:00 |
|
whitequark
|
2bdc483e15
|
Unbreak network configuration page.
|
2018-03-27 09:32:37 +00:00 |
|
whitequark
|
2d29078ba1
|
Remove unused import.
|
2018-03-27 09:17:57 +00:00 |
|
whitequark
|
8de311a34f
|
Remove unnecessary unsafe blocks.
|
2018-03-27 09:17:34 +00:00 |
|
whitequark
|
b13ef96bbe
|
Fix RxRing::buf_release.
The original code was correct after all.
|
2018-03-27 09:13:11 +00:00 |
|
whitequark
|
308ad97586
|
Rewrite ethmac to split ownership into RX/TX halves.
|
2018-03-27 09:10:47 +00:00 |
|
whitequark
|
5a5596f7a2
|
Fix signature of panic_fmt even further.
|
2018-03-27 08:55:35 +00:00 |
|
whitequark
|
dce70f352a
|
Fix signature of panic_fmt.
|
2018-03-27 08:41:23 +00:00 |
|
whitequark
|
f067d0fee9
|
Fix DMA writing to dangling pointers in ethmac.
|
2018-03-26 12:35:28 +00:00 |
|
whitequark
|
83629cac49
|
Update smoltcp.
|
2018-03-26 11:37:14 +00:00 |
|
whitequark
|
4cac825c41
|
Update firmware dependencies.
|
2018-03-26 11:33:00 +00:00 |
|
Sebastien Bourdeauducq
|
e1d7924969
|
openocd: use find instead of hardcoded paths
|
2018-03-19 20:31:41 +08:00 |
|
Sebastien Bourdeauducq
|
cbdd2c409c
|
Revert "Revert the rx_buf_release() change in 8491394a."
This reverts commit 724221c643.
|
2018-03-19 15:39:41 +08:00 |
|
whitequark
|
dcb5321e82
|
Fix cmp::max/min mixup in 8491394a.
|
2018-01-29 07:43:25 +00:00 |
|
whitequark
|
724221c643
|
Revert the rx_buf_release() change in 8491394a.
|
2018-01-29 07:30:12 +00:00 |
|
whitequark
|
c6887e3813
|
Update cargo-m-rt.
Required for compatibility with newer rustc nightlies.
|
2018-01-26 13:07:43 +00:00 |
|
whitequark
|
8491394a50
|
Update to newer smoltcp.
This also fixes a bug where RX descriptors would be first advanced
and then released.
|
2018-01-26 13:07:43 +00:00 |
|
Sebastien Bourdeauducq
|
fe088d7bba
|
update errata
|
2017-12-29 15:05:12 +08:00 |
|
Sebastien Bourdeauducq
|
416ac30496
|
do not use GDB for loading firmware
GDB adds unnecessary steps and it is buggy.
|
2017-09-25 19:15:46 +08:00 |
|
Sebastien Bourdeauducq
|
30746d0565
|
update smoltcp
|
2017-09-09 17:25:07 +08:00 |
|
Sebastien Bourdeauducq
|
916e940780
|
update smoltcp
|
2017-09-05 17:26:23 +08:00 |
|
Sebastien Bourdeauducq
|
e6f3a65642
|
add JSON interface
|
2017-08-08 13:13:41 +08:00 |
|
Sebastien Bourdeauducq
|
9c64304cf2
|
support resetting settings using pushbutton
|
2017-08-08 12:19:05 +08:00 |
|
Sebastien Bourdeauducq
|
5c1cacbd38
|
support setting IP address via web interface
|
2017-08-08 11:05:09 +08:00 |
|
Sebastien Bourdeauducq
|
1a06b524d2
|
implement support for HTTP GET arguments
|
2017-08-08 11:04:38 +08:00 |
|
Sebastien Bourdeauducq
|
e8174f0773
|
config fixes
|
2017-08-08 10:48:59 +08:00 |
|
Sebastien Bourdeauducq
|
e5ea9a3918
|
add config module
|
2017-08-07 23:57:29 +08:00 |
|
Sebastien Bourdeauducq
|
5955c0f97d
|
more eeprom cleanups, use u8 for buffer
|
2017-08-07 23:56:51 +08:00 |
|
Sebastien Bourdeauducq
|
bd9082561c
|
add missing file from previous commit
|
2017-08-07 20:03:18 +08:00 |
|
Sebastien Bourdeauducq
|
49cac15621
|
track firmware version and expose to HTTP
|
2017-08-07 17:54:25 +08:00 |
|
Sebastien Bourdeauducq
|
98256a0239
|
clean up index.html
|
2017-08-07 16:49:47 +08:00 |
|
Sebastien Bourdeauducq
|
3059720430
|
configure Ethernet LED
|
2017-08-07 16:36:21 +08:00 |
|
Sebastien Bourdeauducq
|
d812932732
|
cleanup and integrate EEPROM driver
|
2017-08-07 16:13:29 +08:00 |
Alexander Shafir
|
f94b50e9ab
|
add EEPROM driver
|
2017-08-07 12:27:59 +08:00 |
|
Sebastien Bourdeauducq
|
dcd2a57aa4
|
get_time_ms: ADC sampling takes NSH+12 cycles and not NSH
|
2017-08-07 11:25:39 +08:00 |
|
Sebastien Bourdeauducq
|
5ef86b4516
|
detect invalid programmed MAC address
|
2017-08-07 11:18:19 +08:00 |
|
Alexander Shafir
|
115211c143
|
fix ethmac initialization
|
2017-08-07 11:18:00 +08:00 |
|
Sebastien Bourdeauducq
|
e7bca6d0c7
|
fix TX buffer length in ethmac
|
2017-08-07 10:47:39 +08:00 |
|
Sebastien Bourdeauducq
|
93d0401b71
|
report measurements on HTTP page
|
2017-08-07 10:42:43 +08:00 |
|
Sebastien Bourdeauducq
|
5d4a223800
|
report target filament voltage
|
2017-08-07 10:37:24 +08:00 |
|
Sebastien Bourdeauducq
|
c815d4d37f
|
tweak cathode PID
|
2017-08-07 10:36:26 +08:00 |
|
Sebastien Bourdeauducq
|
9a4adb267d
|
optimize electrometer averaging
|
2017-08-07 00:24:41 +08:00 |
|
Sebastien Bourdeauducq
|
cccd6e52f6
|
remove GDB breakpoint at startup
|
2017-08-06 19:56:04 +08:00 |
|
Sebastien Bourdeauducq
|
e676cb59bf
|
work around ADC sample rate snafu
|
2017-08-06 19:53:16 +08:00 |
|
Sebastien Bourdeauducq
|
f156c7c6d1
|
print panic messages on UART
|
2017-08-06 19:52:11 +08:00 |
|
Sebastien Bourdeauducq
|
d18712d1be
|
flashed MAC address doesn't work
|
2017-08-06 19:12:10 +08:00 |
|
Sebastien Bourdeauducq
|
68eb1cdbba
|
start ADC after initialization, to avoid FIFO overflows
|
2017-08-06 19:06:47 +08:00 |
|
Sebastien Bourdeauducq
|
98b17fc574
|
update dependencies
|
2017-08-06 12:59:30 +08:00 |
|
Sebastien Bourdeauducq
|
1da96a2a4d
|
convert ADC interrupt count to milliseconds
|
2017-08-06 11:37:24 +08:00 |
|
Sebastien Bourdeauducq
|
8247c8f5a5
|
refactor ethmac
|
2017-08-06 02:18:33 +08:00 |
|
Sebastien Bourdeauducq
|
e8d6d84ac5
|
superficial ethmac cleanup
|
2017-08-05 16:24:22 +08:00 |
|
Sebastien Bourdeauducq
|
648b4da9da
|
integrate ethmac/smoltcp (timestamp missing), add HTTP server
|
2017-08-05 15:51:54 +08:00 |
|
Sebastien Bourdeauducq
|
98f116e226
|
compile ethmac driver
|
2017-08-02 00:33:33 +08:00 |
|
Alexander Shafir
|
0ab3b6116e
|
add ethmac driver
|
2017-07-31 13:37:00 +08:00 |
|
Sebastien Bourdeauducq
|
914dc7f6c8
|
increase clock frequency, enable FPU correctly
|
2017-06-12 19:22:23 +08:00 |
|
Sebastien Bourdeauducq
|
52c123f215
|
raise threshold for switching to more sensitive IC range
|
2017-06-08 21:51:11 +08:00 |
|
Sebastien Bourdeauducq
|
5f19c2fdf5
|
clean up gauge parameters
|
2017-06-08 21:50:39 +08:00 |
|
Sebastien Bourdeauducq
|
0094a73336
|
add more pictures
|
2017-06-07 15:06:50 +08:00 |
|
Sebastien Bourdeauducq
|
680a00779e
|
update readme, reorganize
|
2017-05-18 17:07:07 +08:00 |
|
Sebastien Bourdeauducq
|
ebc341f28c
|
add missing PID update
|
2017-05-17 00:08:02 +08:00 |
|
Sebastien Bourdeauducq
|
5f90960ce1
|
tweak emission PID parameters
|
2017-05-17 00:07:43 +08:00 |
|
Sebastien Bourdeauducq
|
5e13d30cc1
|
add parameters for chinese ion gauges
|
2017-05-17 00:06:36 +08:00 |
|
Sebastien Bourdeauducq
|
246839f153
|
autoselect IC range
|
2017-05-13 15:40:41 +08:00 |
|
Sebastien Bourdeauducq
|
dc4534eb00
|
average more IC samples
|
2017-05-13 15:08:01 +08:00 |
|
Sebastien Bourdeauducq
|
ba1482db43
|
adjust anode PID coefficients
|
2017-05-13 15:07:50 +08:00 |
|
Sebastien Bourdeauducq
|
ad447cd5f9
|
use PID for FV, print all debug messages
|
2017-05-12 11:07:35 +08:00 |
|
Sebastien Bourdeauducq
|
44d95973ca
|
add electrometer, introduce *Status objects
|
2017-05-11 23:15:01 +08:00 |
|
Sebastien Bourdeauducq
|
c676102b33
|
handle protection, print current/voltage values
|
2017-05-11 14:55:00 +08:00 |
|
Sebastien Bourdeauducq
|
1c516ca357
|
update FD_ADC_GAIN for new value of R234
|
2017-05-11 10:54:32 +08:00 |
|
Sebastien Bourdeauducq
|
fd507cb6fb
|
average emission current samples, implement emission_ready
|
2017-05-10 00:29:52 +08:00 |
|
Sebastien Bourdeauducq
|
8975f8c240
|
compute emission current, filament voltage and bias voltage
|
2017-05-10 00:10:52 +08:00 |
|
Sebastien Bourdeauducq
|
9662570999
|
print message on protection latch
|
2017-05-10 00:10:16 +08:00 |
|
Sebastien Bourdeauducq
|
f993e65fca
|
fix elapsed counter
|
2017-05-09 19:08:16 +08:00 |
|
Sebastien Bourdeauducq
|
caec6f1a3b
|
compute FV and FBV
|
2017-05-09 19:07:59 +08:00 |
|
Sebastien Bourdeauducq
|
c7f4dba53a
|
remove unnecessary mut
|
2017-05-09 19:06:42 +08:00 |
|
Sebastien Bourdeauducq
|
e4f513d444
|
reorganize
|
2017-05-09 15:58:06 +08:00 |
|
whitequark
|
8a49dfc980
|
Add UART debug port.
|
2017-05-09 05:16:00 +00:00 |
|
Sebastien Bourdeauducq
|
9fdce3ac4c
|
speed up ADC
|
2017-05-08 23:47:05 +08:00 |
|
Sebastien Bourdeauducq
|
252b8eeb28
|
put ADC in continuous sample mode
|
2017-05-08 23:24:23 +08:00 |
|
Sebastien Bourdeauducq
|
ecadb7c996
|
some PID tuning
|
2017-05-08 23:22:42 +08:00 |
|
whitequark
|
b07cd31572
|
Raise ADC clock to 32 MHz (maximum).
|
2017-05-08 13:28:25 +00:00 |
|
Sebastien Bourdeauducq
|
592aee4735
|
update dependencies
|
2017-05-08 10:08:16 +08:00 |
|
whitequark
|
ba37d13dae
|
Enable FPU.
|
2017-05-07 17:32:53 +00:00 |
|
whitequark
|
3b7eb8bd9a
|
Make ADC actually work.
|
2017-05-07 16:59:03 +00:00 |
|
whitequark
|
0ba8971aff
|
Enable PLL at 320 MHz.
|
2017-05-07 16:28:03 +00:00 |
|
whitequark
|
d6bfba821e
|
Unbreak ADC interrupt.
|
2017-05-06 16:00:01 +00:00 |