Mikołaj Sowiński
|
16e4b616ca
|
Updated EEM FMC Carrier support for v1.1
Signed-off-by: Mikołaj Sowiński <mikolaj.sowinski@rd.technosystem.pl>
|
2024-05-14 08:46:35 +08:00 |
linuswck
|
72a5231493
|
artiq_flash: add EEM FMC Carrier Board Support
- The code is derived from PR #2134 936f24f6bd
|
2023-07-25 11:14:19 +08:00 |
Sebastien Bourdeauducq
|
7dafdfe2f7
|
artiq_flash: fix bit2bin
|
2023-01-06 18:24:00 +08:00 |
Sebastien Bourdeauducq
|
5da9794895
|
remove Sayma and Metlino support
|
2023-01-06 17:41:12 +08:00 |
kk1050
|
748e28be38
|
artiq_flash: bail out if scan chain is wrong
Due to OpenOCD limitations, there currently doesn't seem to be a better way of doing it. Upstream patch may be coming.
|
2022-07-26 09:49:48 +08:00 |
Mike Birtwell
|
a106ed0295
|
artiq_flash: don't try to make rtm_binary_dir if binary_dir unset (#1851)
Signed-off-by: Michael Birtwell <michael.birtwell@oxionics.com>
|
2022-02-18 18:54:17 +08:00 |
Sebastien Bourdeauducq
|
65eab31f23
|
simplify board package format and artiq_flash
|
2022-02-14 15:54:17 +08:00 |
Harry Ho
|
b49f813b17
|
artiq_flash: ignore checking non-RTM artifacts if unused
|
2021-11-18 16:59:32 +08:00 |
Harry Ho
|
c940f104f1
|
artiq_flash: fix gateware header not in little-endian for RISC-V
|
2021-10-25 11:20:26 +08:00 |
Sebastien Bourdeauducq
|
53a98acfe4
|
artiq_flash: cleanup openocd handling, do not follow symlinks
Not following symlinks allows files to be added to OpenOCD via nixpkgs buildEnv.
|
2021-07-26 17:01:24 +08:00 |
Sebastien Bourdeauducq
|
4fb8ea5b73
|
artiq_flash: determine which firmware to flash by looking at filesystem
Closes #1719
|
2021-07-14 16:43:00 +08:00 |
Sebastien Bourdeauducq
|
935e18c1be
|
artiq_flash: improve openocd not found error message
|
2021-05-13 14:45:23 +08:00 |
Sebastien Bourdeauducq
|
77e6fdb7a7
|
artiq_flash: cleanup Sayma RTM management, support flashing AMC with RTM disconnected
|
2020-04-14 18:22:06 +08:00 |
Sebastien Bourdeauducq
|
ffb24e9fff
|
artiq_flash: use correct proxy bitstream for Metlino
|
2020-02-03 18:07:26 +08:00 |
Sebastien Bourdeauducq
|
b2480f0edc
|
artiq_flash: update actions documentation
|
2019-12-21 14:18:28 +08:00 |
Sebastien Bourdeauducq
|
f35f658bc5
|
artiq_flash: rework RTM management
|
2019-12-08 15:29:31 +08:00 |
Sebastien Bourdeauducq
|
bcd061f141
|
artiq_flash: RTM is a regular DRTIO satellite, can be used with all variants
|
2019-12-08 15:12:04 +08:00 |
Paweł Kulik
|
3851a02a3a
|
Added option of flashing only RTM gateware.
Signed-off-by: Paweł Kulik <pawel.kulik@creotech.pl>
|
2019-12-07 09:31:19 +08:00 |
Sebastien Bourdeauducq
|
4a03ca928d
|
artiq_flash: sayma fixes
|
2019-11-28 17:38:29 +08:00 |
Sebastien Bourdeauducq
|
4416378d21
|
frontend: add --version to common tools
|
2019-11-14 11:42:31 +08:00 |
Sebastien Bourdeauducq
|
3fd6962bd2
|
use sipyco (#585)
|
2019-11-10 15:55:17 +08:00 |
Sebastien Bourdeauducq
|
e2f9f59472
|
artiq_flash: fix flashing Sayma RTM from package
|
2019-11-05 15:19:01 +08:00 |
Sebastien Bourdeauducq
|
e2a924449d
|
artiq_flash: use DRTIO RTM gateware
|
2019-10-06 17:28:14 +08:00 |
Sebastien Bourdeauducq
|
1bc5d44a7c
|
artiq_flash: do not flash RTM gateware on Sayma variants that don't need it
|
2019-10-06 13:15:50 +08:00 |
Sebastien Bourdeauducq
|
6f533727cb
|
artiq_flash: use regular bscan_spi_xcku040 for Sayma
The modified version is no longer necessary on v2 boards, and breaks flash bank 1.
|
2019-10-04 17:50:45 +08:00 |
Sebastien Bourdeauducq
|
34c61db790
|
artiq_flash: fix Metlino support
|
2019-05-19 16:37:40 +08:00 |
Sebastien Bourdeauducq
|
88b6496c8c
|
artiq_flash: add Metlino support
|
2019-05-19 16:30:10 +08:00 |
Sebastien Bourdeauducq
|
3209197b0b
|
artiq_flash: do not needlessly look for artifacts
|
2019-05-07 17:20:13 +08:00 |
Sebastien Bourdeauducq
|
8d2c1be44f
|
artiq_flash: ignore rtm_gateware on Sayma for variant autodetection
|
2019-03-17 15:57:50 +08:00 |
Sebastien Bourdeauducq
|
b219f8b5c7
|
artiq_flash: autodetect variant
|
2019-03-08 19:47:24 +08:00 |
Sebastien Bourdeauducq
|
fc9d4c7bdc
|
artiq_flash: fix sayma master detection
|
2019-03-08 19:36:35 +08:00 |
Sebastien Bourdeauducq
|
25bcebd1f6
|
artiq_flash: not all boards are development boards
|
2019-03-08 19:35:20 +08:00 |
Sebastien Bourdeauducq
|
ed2d8dfa7a
|
artiq_flash: resolve openocd symbolic links
On NixOS, openocd may be a symlink in /run/current-system/sw/bin when installed system-wide.
|
2019-03-08 12:43:06 +08:00 |
Sebastien Bourdeauducq
|
62985fbd29
|
binaries -> board-support
|
2019-02-22 23:18:01 +08:00 |
Drew
|
f2c1d32e54
|
frontend: add --version flag to cmd line args (#1181)
|
2019-01-12 09:47:47 +08:00 |
Paweł K
|
57caa7b149
|
artiq_flash: add command to erase flash memory (#1197)
|
2018-11-28 12:33:32 +02:00 |
Robert Jördens
|
b58ec2d78e
|
artiq_flash: treat all variants ending in `satellite` as such
|
2018-08-29 17:53:48 +00:00 |
Sebastien Bourdeauducq
|
c172ec6de9
|
artiq_flash: target Kasli by default
|
2018-08-13 12:13:21 +08:00 |
Sebastien Bourdeauducq
|
811882943b
|
artiq_flash: RTM gateware is not required for master variant
|
2018-06-25 18:28:55 +08:00 |
Robert Jördens
|
aff7fa008f
|
Revert "artiq_flash/sayma: check for DONE after load"
This reverts commit 2de5b0cf25 .
would make artiq uninstallable on windows as win buildbot is broken
|
2018-06-12 19:14:43 +02:00 |
Robert Jördens
|
2de5b0cf25
|
artiq_flash/sayma: check for DONE after load
|
2018-06-13 00:47:43 +08:00 |
Sebastien Bourdeauducq
|
cc0ddf9d72
|
artiq_flash: do not check variants anymore
Not very useful and adds to the maintainance when building new Kasli systems.
|
2018-05-28 10:59:01 +08:00 |
Sebastien Bourdeauducq
|
4e5fe672e7
|
kasli: add tester target
|
2018-05-21 17:43:39 +08:00 |
Sebastien Bourdeauducq
|
37bd0c2566
|
kasli: add USTC target
|
2018-05-18 16:15:07 +08:00 |
Sebastien Bourdeauducq
|
6b811c1a8b
|
sayma: fix runtime/rtm gateware address conflict
|
2018-05-09 19:47:29 +08:00 |
whitequark
|
a148729bf8
|
artiq_flash, artiq_devtool: add support for ssh -J option.
|
2018-05-05 02:50:01 +00:00 |
Sebastien Bourdeauducq
|
eac447278f
|
kasli: add MITLL variant
|
2018-04-17 19:00:11 +08:00 |
Sebastien Bourdeauducq
|
0635907699
|
artiq_flash: fix cmdline formatting
|
2018-03-22 19:10:29 +08:00 |
Sebastien Bourdeauducq
|
46d5af31a1
|
artiq_flash: enclose filename in curly braces before passing to OpenOCD
Closes #927
|
2018-03-22 17:20:48 +08:00 |
Sebastien Bourdeauducq
|
eeedcfbdd7
|
artiq_flash: do not suppress useful backtrace information
|
2018-03-22 17:11:21 +08:00 |