hartytp
7d7be6e711
wrpll.core: move collector into helper CD so we can get tags out while the filters are reset
2020-10-08 15:32:27 +08:00
3fa5d0b963
wrpll: clean up sign extension
2020-10-08 15:32:27 +08:00
hartytp
87911810d6
wrpll.core: add CSRs to monitor the collector outputs
2020-10-08 15:32:27 +08:00
hartytp
f2f942a8b4
wrpll.ddmtd: remove CSRs from DDMTD
...
We will gather then from the collector output so we can get all tags on the same cycle
2020-10-08 15:32:27 +08:00
hartytp
85bb641917
wrpll.ddmtd: fix first edge deglitcher
...
The blind counter should be held in reset whenever the input is high,
not just when there is a rising edge (otherwise the counter runs down
during the main pulse and can then re-trigger on jitter from the falling edge)
2020-10-08 15:32:27 +08:00
hartytp
f3cd0fc675
wrpll.filters: the helper clipping threshold is currently way too low. Move clipping after the bitshift to increase a bit.
...
TODO: think about this and pick a sensible threshold (and also think about integrator anti windup)
2020-10-08 15:32:27 +08:00
hartytp
e5e648bde1
wrpll: add bit shift for collector helper output
2020-10-08 15:32:27 +08:00
hartytp
c9ae406ac6
wrpll: change the DDMTD helper frequency to match CERN, improve docs
2020-10-08 15:32:27 +08:00
hartytp
f6f6045f1a
wrpll.thls: fix make
2020-10-08 15:32:27 +08:00
hartytp
b44b870452
wrpll.filters: update to match Weida's MatLab simulations
2020-10-08 15:32:27 +08:00
hartytp
e9ab434fa7
wrpll.core: update for modified collector
2020-10-08 15:32:27 +08:00
17c952b8fb
wrpll: style
2020-10-08 15:32:27 +08:00
hartytp
ebb7ccbfd1
wrpll: document DDMTD collector and fix unwrapping
2020-10-08 15:32:27 +08:00
7c2519c912
manual: nixpkgs 20.09
2020-10-08 09:18:46 +08:00
1bfe977203
manual: sphinx mock module whack-a-mole
2020-10-07 19:25:26 +08:00
66401aee9c
dashboard: cleanup import
2020-10-07 19:24:54 +08:00
6baf3b2198
RELEASE_NOTES: fix indentation
2020-10-07 19:24:34 +08:00
fe6115bcbb
compiler: fix incorrect with behavior
2020-10-07 18:59:35 +08:00
02f46e8b79
Fixes none to bool coercion
...
Fixes #1413 and #1414 .
2020-10-07 15:34:24 +08:00
88d346fa26
fixes with statement with multiple items
...
Closes #1478
2020-10-07 15:33:34 +08:00
9214e0f3e2
firmware: fix Si5324 CKIN selection on Kasli 2.0
...
https://github.com/sinara-hw/Kasli/issues/82#issuecomment-702129805
2020-10-02 20:35:32 +08:00
a65239957f
ad53xx: distinguish errors
2020-09-24 10:52:03 +02:00
c55f2222dc
fastino: documentation and eem pass-through
...
* Repeat information about matching log2_width a few times
in the hope that people read it. #1518
* Pass through log2_width in kasli_generic json. close #1481
* Check DAC value range. #1518
2020-09-22 17:58:53 +02:00
29c940f4e3
kasli2: forward sma_clkin to si5324
2020-09-17 16:53:43 +08:00
bff611a888
test: relax test_dma_playback_time on Zynq
2020-09-11 11:21:45 +08:00
6195b1d3a0
rpc: fixed _write_bool
...
Closes #1519
2020-09-04 13:49:22 +08:00
56aa22caeb
fastino: document/cleanup
...
* added documentation on `update`/`hold` mechanism
* mask machine unit values
* cleanup coredevice driver
close #1518
2020-09-03 17:44:26 +02:00
1b475bdac4
build_soc: remove assertion that was used for test runs
2020-09-03 20:24:18 +08:00
458a411320
metlino_sayma_ttl: Fix RTIO frequency & demo code ( #1516 )
2020-09-03 15:08:31 +08:00
47e88dfcbe
Revert "test: temporarily disable test_async_throughput"
...
This reverts commit f0289d49ab
2020-09-03 14:19:55 +08:00
002a71dd8d
build_soc: rename identifier_str to gateware_identifier_str
2020-09-02 00:00:57 +08:00
4398a2d5fa
test: relax loopback gate timing
2020-09-01 17:50:09 +08:00
f0289d49ab
test: temporarily disable test_async_throughput
...
M-Labs/artiq-zynq#104
2020-09-01 17:49:40 +08:00
8d5dc0ad2a
test: relax test_pulse_rate on Zynq
2020-09-01 17:08:26 +08:00
f294d039b3
test: skip NonexistentI2CBus if I2C is not supported
2020-09-01 16:47:04 +08:00
91df3d7290
build_soc: override identifier_str only for gateware
2020-09-01 10:46:39 +08:00
3d84135810
examples: add Metlino master, Sayma satellite with TTLOuts via FMC
2020-08-31 16:21:45 +08:00
dfbf3311cb
sayma_amc: add support for 4x DIO output channels via FMC
2020-08-31 16:21:45 +08:00
1ad9deaf91
fmcdio_vhdci_eem: fix pin naming
2020-08-31 16:21:45 +08:00
45ae6202c0
build_soc: add identifier_str override option
...
Signed-off-by: Stephan Maka <stephan@spaceboyz.net>
2020-08-31 11:48:58 +08:00
b2572003ac
RPC: optimization by caching
...
This reduced the calls needed for socket send/recv.
2020-08-28 14:58:34 +08:00
69f0699ebd
test: improved test_performance
...
1. Added tests for small payload.
2. Added statistics.
2020-08-28 14:58:34 +08:00
7cf974a6a7
comm_kernel: fix typo
2020-08-28 12:25:23 +08:00
26bc5d2405
Updated release notes
2020-08-26 14:17:06 +08:00
aac2194759
Ported rpc changes to or1k
2020-08-26 14:17:06 +08:00
7181ff66a6
compiler: improved rpc performance for list and array
...
1. Removed duplicated tags before each elements.
2. Use numpy functions to speedup parsing.
2020-08-26 14:17:06 +08:00
cfddc13294
test: fixed test_performance
...
Added more tests and use normal rpc instead of async rpc.
Async RPC does not represent the real throughput which is limited by the
hardware and the network. Normal RPC which requires a response from the
remote is closer to real usecases.
2020-08-26 14:17:06 +08:00
Paweł Kulik
eb350c3459
Drive SFP0 TX_DISABLE low during startup (as was in Kasli v1.1). Fixes Ethernet on SFP modules with pullup on this line.
...
Signed-off-by: Paweł Kulik <pawel.kulik@creotech.pl>
2020-08-24 21:39:53 +08:00
5f6aa02b61
gui: unbreak background
2020-08-14 13:14:45 +08:00
David Nadlinger
69718fca90
gui: Improve fuzzy-select heuristics
...
Even though the code already used non-greedy wildcards before,
it would not find the shortest match, as earlier match starts
would still take precedence.
This could possibly be sped up a bit in CPython by doing
everything inside re using lookahead-assertion trickery, but the
current code is already imperceptibly fast for hundreds of
choices.
2020-08-14 02:13:45 +01:00
