Commit Graph

170 Commits

Author SHA1 Message Date
Robert Jördens 5a30536d59 doc: write section on developing with a conda env 2017-02-02 19:53:18 +01:00
whitequark e5085c063f doc: test mode was removed, clean up. 2017-01-24 22:25:21 +00:00
Robert Jördens f7e8961ab0 Merge branch 'master' into phaser
* master: (23 commits)
  RELEASE_NOTES: update
  pipistrello: add some inputs
  Remove last vestiges of nist_qc1.
  Fully drop AD9858 and kc705-nist_qc1 support (closes #576).
  coredevice.dds: reimplement fully in ARTIQ Python.
  compiler: unbreak casts to int32/int64.
  analyses.constness: fix false positive on x[...].
  inferencer: significantly improve the op-assignment diagnostic.
  Fix tests.
  Move mu_to_seconds, seconds_to_mu to Core.
  artiq_devtool: don't crash on invalid utf-8.
  artiq_devtool: detect a race condition during connect.
  llvm_ir_generator: handle no-op coercions.
  conda: use development version of migen/misoc
  Revert accidentally committed code.
  Revert "gateware: increase RTIO FIFO sizes for NIST_CLOCK. Closes #623"
  analyses.invariant_detection: implement (#622).
  Fix whitespace.
  coredevice.dds: work around the round(numpy.float64()) snafu.
  coredevice.dds: update from obsolete int(width=) syntax (fixes #621).
  ...
2016-11-21 17:29:39 +01:00
whitequark 6aa5d9f6c6 Remove last vestiges of nist_qc1. 2016-11-21 15:36:22 +00:00
whitequark 5e8888d5f3 Fully drop AD9858 and kc705-nist_qc1 support (closes #576). 2016-11-21 15:14:17 +00:00
Robert Jördens 4a0eaf0f95 phaser: add jesd204b rtio dds
gateware: add jesd204b awg

gateware: copy phaser (df3825a)
dsp/tools: update satadd mixin
phaser: no DDS stubs
dsp: accu fix
phaser: cleanup/reduce

sawg: kernel support and docs

sawg: coredevice api fixes

sawg: example ddb/experiment

phaser: add conda package

examples/phaser: typo

sawg: adapt tests, fix accu stb

sawg: tweak dds parameters

sawg: move/adapt/extend tests

sawg: test phy, refactor

phaser: non-rtio spi

phaser: target cli update

phaser: ad9154-fmc-ebz pins

phaser: reorganize fmc signal naming

phaser: add test mode stubs

phaser: txen is LVTTL

phaser: clk spi xfer test

phaser: spi for ad9154 and ad9516

phaser: spi tweaks

ad9154: add register map from ad9144.xml

ad9516: add register map from ad9517.xml and manual adaptation

ad9154_reg: just generate getter/setter macros as well

ad9154: reg WIP

ad9154: check and fix registers

kc705: single ended rtio_external_clk

use single ended user_sma_clk_n instead of p/n to free up one clock sma

kc705: mirror clk200 at user_sma_clock_p

ad9516_regs.h: fix B_COUNTER_MSB

phase: wire up clocking differently

needs patched misoc

kc705: feed rtio_external_clock directly

kc705: remove rtio_external_clk for phaser

phaser: spi tweaks

ad9516: some startup

ad9516_reg fixes

phaser: setup ad9516 for supposed 500 MHz operation

ad9516: use full duplex spi

ad9154_reg: add CONFIG_REG_2

ad9154_reg: fixes

phaser: write some ad9154 config

ad9154_reg: fixes

ad9154: more init, and human readable setup

ad9154/ad9516: merge spi support

ad9154: status readout

Revert "kc705: remove rtio_external_clk for phaser"

This reverts commit d500288bb44f2bf2eeb0c2f237aa207b0a8b1366.

Revert "kc705: feed rtio_external_clock directly"

This reverts commit 8dc7825519e3e75b7d3d29c9abf10fc6e3a8b4c5.

Revert "phase: wire up clocking differently"

This reverts commit ad9cc450ffa35abb54b0842d56f6cf6c53c6fbcc.

Revert "kc705: mirror clk200 at user_sma_clock_p"

This reverts commit 7f0dffdcdd28e648af84725682f82ec6e5642eba.

Revert "kc705: single ended rtio_external_clk"

This reverts commit a9426d983fbf5c1cb768da8f1da26d9b7335e9cf.

ad9516: 2000 MHz clock

phaser: test clock dist

phaser: test freqs

ad9154: iostandards

phaser: drop clock monitor

phaser: no separate i2c

phaser: drive rtio from refclk, wire up sysref

phaser: ttl channel for sync

ad9154: 4x interp, status, tweaks

phaser: sync/sysref 33V banks

phaser: sync/sysref LVDS_25 inputs are VCCO tolerant

phaser: user input-only ttls

phaser: rtio fully from refclk

ad9154: reg name usage fix

ad9154: check register modifications

Revert "ad9154: check register modifications"

This reverts commit 45121d90edf89f7bd8703503f9f317ad050f9564.

ad9154: fix status code

ad9154: addrinc, recal serdes pll

phaser: coredevice, example tweaks

sawg: missing import

sawg: type fixes

ad9514: move setup functions

ad9154: msb first also decreasing addr

phaser: use sys4x for rtio internal ref

phaser: move init code to main

phaser: naming cleanup

phaser: cleanup pins

phaser: move spi to kernel cpu

phaser: kernel support for ad9154 spi

ad9154: add r/w methods

ad9154: need return annotations

ad9154: r/w methods are kernels

ad9154_reg: portable helpers

phaser: cleanup startup kernel

ad9154: status test

ad9154: prbs test

ad9154: move setup, document

phaser: more documentation
2016-10-05 16:17:50 +02:00
Sebastien Bourdeauducq 3befe37221 manual: minor cleanup 2016-06-22 10:01:56 +08:00
Sebastien Bourdeauducq 48c0812df0 manual: split source install instructions to a separate page 2016-06-22 09:45:56 +08:00
whitequark 284e0d6876 doc: update installing.rst to reflect openocd packaged in conda. 2016-06-04 07:53:53 +00:00
Sebastien Bourdeauducq e8aadd0a1a doc: document common KC705 problems. Closes #450 2016-06-03 23:20:38 -04:00
Sebastien Bourdeauducq e98fdfa7ca manual/installing: mention netmask and gateway. Closes #441 2016-05-25 10:32:36 -05:00
Sebastien Bourdeauducq faa268e814 manual/installing: --toolchain vivado 2016-04-14 01:25:36 +08:00
Sebastien Bourdeauducq 6fc73a0256 manual/installing: -H nist_... 2016-04-14 01:20:13 +08:00
Sebastien Bourdeauducq 56af4e9147 doc/installing: add note about example dependencies 2016-04-11 17:03:49 +08:00
Robert Jördens 36c1fdb5ad installing.rst: typo 2016-04-10 21:01:00 +08:00
Robert Jördens 62eae5eb34 installing.rst: adapters renaming from ed1c368 2016-04-10 11:21:09 +08:00
Robert Jördens 7f7750eef2 installing.rst: triple colons 2016-04-10 11:17:45 +08:00
Robert Jördens 26f55f2010 installing.rst: update, clarify 2016-04-09 23:58:11 +08:00
whitequark 32102bc25f doc: use proper CMAKE_BUILD_TYPE for LLVM.
Fixes #380.
2016-04-06 22:05:55 +00:00
Sebastien Bourdeauducq eb68ab9ad0 doc: remote execution 2016-04-06 19:13:41 +08:00
Sebastien Bourdeauducq 7453d85d5e GUI -> dashboard 2016-04-04 22:12:45 +08:00
Robert Jördens c6516f3c83 doc: conda channel -> label 2016-03-31 10:29:07 +02:00
Robert Jördens d561681cc1 doc: add note about xcb (closes #361) 2016-03-31 10:28:57 +02:00
Sebastien Bourdeauducq 4c622194c2 doc: update flterm instructions. Closes #346 2016-03-25 20:10:53 +08:00
Robert Jördens 22cd12f721 doc: correctly place the openocd section, link it, add explanation 2016-03-20 20:19:12 +01:00
Joe Britton d069380f6b Fix typo. And in build of openocd on Ubuntu the aclocal dependency is provided by automake.
adduser requires root

conda installation requires user to build OpenOCD by hand.
2016-03-20 20:18:32 +01:00
Robert Jördens 8e41d50145 doc: add pipistrello adapter explicitly (closes: #339) 2016-03-20 19:57:07 +01:00
Robert Jördens 8fa98f6486 doc: use term 'gateware'
FPGA newcomers are not used to the term 'bitstream'. To insist that this file
is the result of the gateware compilation and thus the binary FPGA format,
add the term 'gateware' as a prefix.
2016-02-29 20:50:45 +01:00
Sebastien Bourdeauducq d0d56bd3fe doc: update install instructions 2016-03-01 00:19:55 +08:00
Sebastien Bourdeauducq be6b64a243 doc: fix conda install instructions 2016-02-22 17:52:18 +08:00
Sebastien Bourdeauducq 14683f297a doc: remove 'Ubuntu 15.10+/Debian jessie+ specific instructions'. Closes #282 2016-02-22 12:08:22 +08:00
whitequark 3da9bfc704 doc: binutils patch is not needed any more. 2016-02-15 18:25:15 +00:00
Sebastien Bourdeauducq b68035d162 manual/installing: refresh 2016-02-10 23:37:21 +01:00
Sebastien Bourdeauducq 028ed72b72 doc: typo 2016-01-07 10:06:43 +08:00
Robert Jördens 0bbe886669 doc/manual: umask warning and openocd installation refinement 2016-01-06 13:12:42 -07:00
Robert Jördens 358ad2e927 artiq_flash: drop redundant instruction, tweak doc 2016-01-06 11:24:05 -07:00
Robert Jördens 25ce0928bd build/doc: simplify proxy bitstream locations 2016-01-05 10:23:50 -07:00
Robert Jördens d633c8e1f8 doc: update and cleanup flashing/installing/building 2016-01-05 10:21:34 +08:00
Sebastien Bourdeauducq 5f3b69dd19 frontend/coreconfig: simplify action names 2015-12-24 18:54:23 +08:00
Sebastien Bourdeauducq 179c50480f frontend: split coretool into coreconfig, corelog and coreanalyzer 2015-12-24 18:51:11 +08:00
Sebastien Bourdeauducq 7548229910 doc/manual/installing: remove outdated note 2015-12-11 10:32:01 +08:00
Felix Held 8b4b269371 doc/manual/installing: fix a bug, add Fedora specific instructions
Signed-off-by: Felix Held <felix-artiq@felixheld.de>
2015-11-21 10:23:58 +08:00
whitequark 51f04f6311 Explicitly use the python3.5 binary everywhere. 2015-11-07 13:39:39 +03:00
Sebastien Bourdeauducq b13ee2ed8f doc: update compilation instructions 2015-11-04 23:38:24 +08:00
Sebastien Bourdeauducq 73fed53c09 manual: document startup clock and kernel 2015-11-01 00:24:44 +08:00
whitequark ff93e3c149 manual: update installing.rst to elaborate QC1/QC2 differences. 2015-10-30 05:07:01 +03:00
whitequark 62419c0952 manual: update installing.rst. 2015-10-30 04:18:42 +03:00
whitequark f3e61e265c conda: move everything except artiq to conda-recipes (closes #138). 2015-10-16 07:06:22 +03:00
Sebastien Bourdeauducq 125503139e remove workaround for Python bug in asyncio process.wait(). Requires Python 3.5. Closes #58 2015-10-03 14:33:18 +08:00
Sebastien Bourdeauducq cd3107ba75 do not use deprecated asyncio.JoinableQueue 2015-10-03 13:59:18 +08:00
Yann Sionneau f602928e89 manual: ARTIQ requires python 3.4.3 or above 2015-09-01 16:46:12 +02:00
Yann Sionneau 2056831c05 manual: add install instructions for pygit2 2015-08-28 17:50:39 +02:00
Yann Sionneau 241b7651a2 manual: fix typo in package name 2015-08-28 09:51:53 +02:00
Yann Sionneau 4d84ec7742 update lx45 bscan bitstream url which wget could not fetch on some systems 2015-08-27 21:38:00 +02:00
Yann Sionneau 7b0b1d6860 manual: Windows (32 and 64-bit) users should install 32-bit miniconda/anaconda 2015-08-26 14:22:13 +02:00
Yann Sionneau a0f1b02eb5 Revert "manual: llvmlite-artiq conda package needs a recent libstdc++6"
This reverts commit 8669f1d61d.
This is no longer needed since the llvmlite-artiq package for
linux-64 has been rebuilt on an older Ubuntu (14.04 LTS)
2015-08-17 17:50:57 +02:00
Yann Sionneau 8669f1d61d manual: llvmlite-artiq conda package needs a recent libstdc++6 2015-08-14 21:44:28 +02:00
Sebastien Bourdeauducq a1c7efd0ae doc: use m-labs anaconda account 2015-08-13 14:47:05 +08:00
Sebastien Bourdeauducq af230f6cf3 Merge branch 'master' of github.com:m-labs/artiq 2015-08-10 15:18:50 +08:00
Sebastien Bourdeauducq 9772676f2d doc: cleanup shell prompts 2015-08-10 15:16:52 +08:00
whitequark 95b56e85a3 Add binutils patch. 2015-08-09 23:33:00 +03:00
Sebastien Bourdeauducq c6e5eaa73a doc/manual: fix confusing board config instructions 2015-08-07 20:48:48 +08:00
whitequark d0402243a0 Update installation instructions. 2015-08-04 18:00:10 +03:00
Sebastien Bourdeauducq 18f38e6242 doc/manual: make sure correct Clang is used 2015-08-04 20:20:56 +08:00
Sebastien Bourdeauducq 433cb948bc doc: artiq git clone needs --recursive to fetch lwIP 2015-08-04 17:01:12 +08:00
whitequark ad7cbc4394 Rename artiq_coreconfig → artiq_coretool; add log subcommand. 2015-08-02 16:40:58 +03:00
whitequark b179430f6b Specify correct llvmlite branch in installation instructions. 2015-07-28 23:43:07 +03:00
Sebastien Bourdeauducq 228f7c3d61 manual: update xc3sprog download 2015-07-28 00:38:20 +08:00
whitequark 95f7be0a88 Update install instructions to reflect that LLVM is always needed. 2015-07-26 09:38:43 +03:00
whitequark e5acdfe3fd Update manual install instructions. 2015-07-26 09:28:11 +03:00
Yann Sionneau 08eec40861 manual: building LLVM as shared libraries is not recommended on Linux and not supported on Windows 2015-07-15 17:34:06 +02:00
Yann Sionneau 774c66a209 manual: also build LLVM native target (needed for py2llvm test) 2015-07-15 17:32:32 +02:00
Yann Sionneau fa4f38b871 manual: add missing llvmlite patches 2015-07-15 17:31:57 +02:00
Yann Sionneau 01ca6ebb1c binstar.org is becoming anaconda.org 2015-07-10 16:30:14 +02:00
Yann Sionneau 3471ef80fd manual: closes #63, tell to install xc3sprog before flashing 2015-07-04 14:48:55 +02:00
Florent Kermarrec 1d052095ee doc/manual/installing: minor cleanups 2015-06-19 08:10:33 +02:00
Yann Sionneau 250f9e0bc0 manual: update artiq_coreconfig parameter's syntax 2015-06-17 16:46:39 +02:00
Yann Sionneau a3f0663823 manual: flash proxies are installed via conda, don't tell to install them 2015-06-16 02:32:22 +02:00
Yann Sionneau a5b34beffa manual: linux-32 conda pkg contains binaries + use only dev channel 2015-06-14 23:27:36 +02:00
Yann Sionneau 00c4101f12 manual: install flash proxy before flashing bitstream/bios/runtime 2015-06-14 22:23:55 +02:00
Yann Sionneau b14ca2ecc9 manual: remove reference to ppro board 2015-06-14 22:05:06 +02:00
Yann Sionneau 23116420d7 manual: add instructions to install from conda 2015-06-14 21:02:37 +02:00
Sebastien Bourdeauducq 82a2beaa32 style fixes 2015-06-04 10:42:37 +08:00
Yann Sionneau a84f76bf09 manual: cleanup, removing Gtk GUI related instructions 2015-05-29 17:45:13 +02:00
Yann Sionneau d5fb50b497 manual: after artiq is installed, frontends can be used without path prefix
except non-python frontends like artiq_flash.sh
2015-05-29 17:44:20 +02:00
Yann Sionneau 7ec0bc0470 manual: explain how to compile and flash the idle kernel 2015-05-29 17:38:23 +02:00
Yann Sionneau 4bf7875b87 flash_storage: refactor + unit tests + artiq_coreconfig.py CLI + doc 2015-05-27 18:06:12 +08:00
Sebastien Bourdeauducq 938e1c2842 Remove UP support.
The only advantage of UP is to support the Papilio Pro, but that port is also very limited in other ways and the Pipistrello provides a more reasonable platform that also supports AMP.

On the other hand, RPCs on UP are difficult to implement with the session.c protocol system (without an operating system or coroutines), along with many other minor difficulties and maintainance issues. Planned features such as watchdogs in the core device are also difficult on UP.
2015-04-27 20:43:45 +08:00
Yann Sionneau 5805240df6 manual: update runtime flashing instructions 2015-04-18 00:33:09 +08:00
Sebastien Bourdeauducq 6973c0f8d5 move patches into misc 2015-04-02 17:06:19 +08:00
whitequark f26486e4cb Improve installation instructions. 2015-03-21 17:01:09 +03:00
Sebastien Bourdeauducq da917f768e initial kc705 support 2015-02-26 21:50:52 -07:00
Yann Sionneau d2619eb78b Add documentation about ARTIQ_GUI environment variable
Also adds "python-gi" as Ubuntu dependency as this is needed
for the GUI.
2015-02-09 19:48:22 +08:00
Sebastien Bourdeauducq f308bf6c12 doc/manual/installing: add python3-h5py for Xubuntu 2015-02-04 18:43:18 +08:00
Sebastien Bourdeauducq 3a2bd02efd doc/manual/installing: add dateutil xubuntu package 2015-01-31 16:55:44 +08:00
Sebastien Bourdeauducq f94aa49276 doc: flterm compilation 2015-01-21 10:31:50 +08:00
Sebastien Bourdeauducq 8ea21f544d update dependencies 2014-12-20 12:14:27 +08:00
Sebastien Bourdeauducq 0dc4eb02ae setup: install frontend tools, remove nosetest dependency, minor fixes 2014-12-10 12:13:10 +08:00
Sebastien Bourdeauducq eb42cf2bb4 doc/manual/installing: LLVM_CONFIG_PATH does not work with the llvmlite ffi makefile. Use PATH instead. 2014-12-10 10:52:38 +08:00
Sebastien Bourdeauducq 46e78a4ff1 doc/manual/installing: fix paths (thanks Joe) 2014-12-10 10:46:03 +08:00