68e433a3a8
opticlock/device_db: resurrect novogorny
...
deleted in a992a67
2018-03-24 13:46:45 +01:00
hartytp
a992a672d9
coredevice/zotino: add ( #969 )
...
* Replace ad5360 driver with a ad53xx driver, designed to have a nicer interface
Add Zotino driver and add to opticlock target for Kasli
Test Zotino on hw:
- Verify all timings on the hardware with a scope
- Verify that we can correctly set and read back all registers in a loop (checks for SI and driver issues)
- check we can set LEDs correctly
- check calibration routine + all si unit functions with a good DVM
- look at DAC transitions on a scope (while triggering of a TTL) on persist to check there are no LDAC glitches etc
To do: update examples and e.g. KC705 device db.
2018-03-24 13:41:18 +01:00
1553fc8c7d
sed: reset valid in output sorter
2018-03-23 11:11:11 +00:00
0635907699
artiq_flash: fix cmdline formatting
2018-03-22 19:10:29 +08:00
46d5af31a1
artiq_flash: enclose filename in curly braces before passing to OpenOCD
...
Closes #927
2018-03-22 17:20:48 +08:00
eeedcfbdd7
artiq_flash: do not suppress useful backtrace information
2018-03-22 17:11:21 +08:00
f2cc2a5ff2
firmware: reset local RTIO PHYs on startup ( #958 )
2018-03-22 16:29:31 +08:00
40e2ced85e
manual: fix core_drivers_reference
2018-03-22 13:26:45 +08:00
9eb0218389
RELEASE_NOTES: add sections for major releases
2018-03-22 13:26:28 +08:00
102e3983b5
manual: reorganize core drivers
2018-03-22 12:06:01 +08:00
1b91339865
manual: fix text role
2018-03-22 12:05:47 +08:00
06f24c6aa2
RELEASE_NOTES: update
2018-03-22 11:46:41 +08:00
770b0a7b79
novogorny: conv -> cnv
...
* parity with sampler
* also add novogorny device to opticlock
2018-03-21 18:38:42 +00:00
82c4f0eed4
sampler: fix channel gain retrieval
2018-03-21 14:22:13 +01:00
12d699f2a8
suservo: add sampler example
2018-03-21 12:21:53 +00:00
97918447a3
sampler: add coredevice driver
2018-03-21 12:21:53 +00:00
1afce8c613
kasli: simplify single eem pin formatting
2018-03-21 13:08:42 +01:00
d48b8f3086
kasli: fix sampler sdr/cnv pins
2018-03-21 09:28:00 +00:00
80903cead7
novogorny: streamline gain setting method, style [nfc]
2018-03-21 08:53:26 +00:00
f5a1001114
suservo: add device database and artiq_flash variant
2018-03-21 08:53:26 +00:00
1fb5907362
kasli: add SUServo variant (Sampler-Urukul Servo)
2018-03-21 08:53:26 +00:00
f74d5772f4
sampler: add wide eem definition
2018-03-21 08:53:26 +00:00
32f22f4c9c
sayma: disable SERDES TTL entirely
...
Timing closure becomes very random, even at 4X.
2018-03-21 13:03:48 +08:00
f8c2d54e75
ttl_serdes_ultrascale: configurable SERDES ratio. Also try X4 on Sayma
2018-03-21 13:01:38 +08:00
9c2d343052
sayma: use SERDES RTIO TTL
...
This is not enabled on the standalone design as it breaks timing.
2018-03-21 10:53:52 +08:00
9ad1fd8f25
urukul: add comment and doc about the AD9910 MASTER_RESET
2018-03-20 17:40:03 +01:00
f17c0abfe4
urukul: don't pulse DDS_RST on init
...
closes m-labs/artiq#940
Apparently, if the DDS are reset, every other time they don't work
properly.
2018-03-20 16:10:26 +00:00
a185e8dc52
urukul: fix MASK_NU offset
2018-03-20 16:10:11 +00:00
f4719ae24b
sdram: clean up console output
2018-03-20 15:42:49 +01:00
206664afd9
sdram: compact read_level output
2018-03-20 10:16:05 +00:00
495625b99d
bootloader: repeat memory test 4 times
2018-03-20 09:57:49 +00:00
6fb0cbfcd3
sdram: clean up, make read_level robust to wrap around
...
* fix a few rust warnings
* also do eye scans on kintex
2018-03-20 09:57:49 +00:00
3abb378fbe
i2c: unused variable
2018-03-20 09:56:26 +00:00
c8020f6bbd
ttl_serdes_generic: fix/upgrade test
2018-03-20 16:46:57 +08:00
a5825184b7
add ttl_serdes_ultrascale (untested)
2018-03-20 16:07:23 +08:00
fad066f1aa
ttl_serdes_7series: cleanup indentation
...
Inconsistent with other code and confuses text editors.
2018-03-20 15:50:04 +08:00
276b0c7f06
sdram: reject read delay wrap arounds
2018-03-20 00:28:41 +01:00
65379b1f7a
conda: bump migen, misoc
...
* xilinx ODDR2 SRTYPE
* flterm leak
* I/ODELAY VTC/reset sequencing
* sayma SDRAM clock buffer LOC
2018-03-19 19:58:52 +01:00
4b3f408143
sdram: simplify read level scan
2018-03-19 18:41:56 +00:00
845784c180
kusddrphy: use first and last tap that yield many valid reads
2018-03-19 17:54:26 +00:00
ed2e0c8b34
sayma/sdram/scan: test each tap 1024 times
2018-03-20 00:59:31 +08:00
hartytp
a27b5d88c2
Novogorny driver, remove unused imports ( #964 )
...
* Novogorny driver, remove unused imports
* more unused imports
* oops, one final one!
2018-03-19 11:58:14 +01:00
7a7ff6d2dd
Merge pull request #963 from hartytp/kasli_zotino_sampler
...
Add Zotino and Sampler functions to Kasli. Add Zotino to Kasli EEM 7 …
2018-03-19 10:52:50 +01:00
Thomas Harty
37d431039d
Fix typos.
...
Reduce ififo depth to 4 for Zotino.
2018-03-19 09:42:18 +00:00
whitequark
c86df8e13e
firmware: try to unstuck the I2C bus if it gets stuck.
...
Fixes #957 .
2018-03-19 06:23:23 +00:00
Thomas Harty
c4fa44bc62
Add Zotino and Sampler functions to Kasli. Add Zotino to Kasli EEM 7 on OptiClock.
2018-03-18 00:25:43 +00:00
f39b7b33e8
ad5360: whitespace [nfc]
2018-03-17 18:51:17 +01:00
2eadb08f8c
Merge pull request #962 from hartytp/ad5360
...
Fix AD5360 after migration to SPI2
2018-03-17 18:48:34 +01:00
ion
c1439bfd3b
Fix AD5360 after migration to SPI2
2018-03-17 11:37:11 +00:00
whitequark
c4bfc83b38
conda: mark the artiq-build output package as noarch, not toplevel.
...
This also changes `noarch: python` to `noarch: generic` since
this is semantically correct; the bitstream/firmware packages
contain no Python code.
Fixes #960 .
2018-03-15 23:17:05 +00:00
