Commit Graph

509 Commits

Author SHA1 Message Date
mwojcik a9b43e8ae2 subkernels: raise exceptions to kernel 2024-07-31 17:23:56 +08:00
mwojcik 4248d71555 repeater: handle async messages 2024-07-09 17:05:16 +02:00
mwojcik 836e266a36 allow toggling SED spread with flash config key 2024-07-09 17:00:09 +02:00
abdul124 25e858f2e9 kernel/api: add rint api 2024-07-05 08:55:13 +02:00
mwojcik 50c63b2c93 repeater: clear buffer after ping 2024-07-04 13:40:32 +02:00
morgan 586fd2f17e Gateware: remove redundant si549.py & wrpll.py 2024-05-30 15:27:16 +08:00
morgan 377f8779a0 kasli soc: refactor to use wrpll from artiq 2024-05-30 15:25:33 +08:00
mwojcik 2b2ebb5354 aux: increase max payload size 2024-05-20 15:20:06 +08:00
morgan 35ea0ed2ca WRPLL: add filter for DRTIO 100MHz 2024-05-08 18:50:55 +08:00
morgan cdf4ff24c0 WRPLL: replace PI controller with new filter 2024-05-08 18:50:55 +08:00
morgan 285b02c4b1 WRPLL: remove anti-windup 2024-05-08 18:50:55 +08:00
morgan 53cb592d19 kasli soc: add rtio_frequency cfg for runtime 2024-05-08 16:14:56 +08:00
morgan 1d603c73b7 DDMTD: replace 1st edge to median edge deglitcher 2024-04-29 13:05:02 +08:00
morgan 61315c29b9 Si549: recalibrate TAG_OFFSET for ISERDESE2 2024-04-29 13:03:30 +08:00
morgan 3f57de6ec7 DDMTD: replace FD with ISERDESE2 2024-04-29 13:03:30 +08:00
morgan cca23aa2a5 wrpll runtime: reduce mmcm output jitter
rtio_clocking: update mmcm setting to use HIGH bandwidth
2024-04-29 11:20:50 +08:00
morgan 2bbaea3ad5 SMAFreqMulti: set mmcm bw to HIGH for lower jitter 2024-04-29 11:20:50 +08:00
mwojcik 0a19f8fb89 satman: revert async flag changes 2024-04-26 11:37:14 +08:00
mwojcik a30c7d1f3a runtime: drtio aux refactoring, revert async flag 2024-04-26 11:37:14 +08:00
mwojcik 2d10503c20 libboard_artiq: support multiple aux rx buffers 2024-04-24 17:12:57 +08:00
mwojcik 92a29051f7 drtio_aux_controller: support aux_buffer_count 2024-04-24 17:12:39 +08:00
morgan 14fa038118 Firmware: Runtime WRPLL
runtime: drive CLK_SEL to true when si549 is used
runtime & libboard_artiq: allow standalone to use io_expander
si549: add bit bang mmcm dynamic configuration
si549: add frequency counter for refclk
rtio_clocking & si549: add 125Mhz wrpll refclk setup
2024-04-12 16:38:46 +08:00
morgan b81323af30 Firmware: Satman skew calibration & tester
cargo template: add calibrate_wrpll_skew feature
tag collector: add TAG_OFFSET for Satman WRPLL
tag collector: add TAG_OFFSET getter & setter for calibration
wrpll: add skew tester and calibration
wrpll: gate calibration behind calibrate_wrpll_skew feature
2024-04-12 16:38:46 +08:00
morgan 291777f764 Firmware: Satman WRPLL
satman: drive CLK_SEL to true when si549 is used
satman : add main & helper si549 setup
satman : add WRPLL select_recovered_clock
si549: add tag collector to process gtx & main tags
si549: add frequency counter to set BASE_ADPLL
si549: add set_adpll for main & helper PLL
si549: add main & helper PLL
FIQ & si549: replace dummy with a custom handler for gtx & main tags ISR
2024-04-12 16:38:39 +08:00
morgan a1d80fb93b Firmware: Si549 and io_expander
io_expander: set CLK_SEL pin to output when si549 is used
io_expander: gate virtual leds for standalone
si549: add bit bang i2c
si549: add si549 programming
si549: add main & helper setup
2024-04-11 15:18:10 +08:00
morgan 7827c7b803 Gateware: kasli_soc WRPLL setup
kasli_soc: use enable_wrpll from json to switch from si5324 to si549
kasli_soc: add wrpll for all variants
kasli_soc: add gtx & main tag nFIQ for all variants
kasli_soc: add clk_synth_se for master & satellite
kasli_soc: add wrpll_refclk for runtime
kasli_soc: add skewtester for satman
kasli_soc: add WRPLL_REF_CLK config for firmware
2024-04-11 15:18:10 +08:00
morgan e4d8d44c7c Gateware: WRPLL
ddmtd: add DDMTD and deglitcher
wrpll: add helper clockdomain
wrpll: add frequency counter
wrpll: add skewtester
wrpll: add gtx & main tag collection
wrpll: add gtx & main tag eventmanager for shared peripheral interrupt
wrpll: add SMA frequency multiplier to generate 125Mhz refclk
si549: add i2c and adpll programmer
2024-04-11 15:18:04 +08:00
morgan 4455f740d2 main: set exception vector table addr
linker: add exceptions start & end symbol
2024-03-07 15:37:42 +08:00
morgan 63bf1c81d4 fiq: use dummy handler to fix compilation error 2024-03-07 13:26:52 +08:00
mwojcik bfb582f99b cargo fmt 2024-02-01 14:43:41 +08:00
mwojcik 52e64fb2f9 subkernel: use negative ID for argument passing 2024-02-01 14:43:41 +08:00
mwojcik facc98058c subkernel: fix DMA return control to wrong master 2024-02-01 14:43:41 +08:00
mwojcik f0f81dbf8a subkernel: support no-timeout, message passing 2024-02-01 14:43:41 +08:00
mwojcik 30e6bf4a3a subkernel: add support for (d)dma 2024-01-11 12:33:02 +08:00
mwojcik 8f4e30dd9c satman: support sub-subkernels, routing 2024-01-11 12:33:02 +08:00
mwojcik e31a31c4ff master: drtioaux:
- support async flag
- source in packets
- rerouting packets
2024-01-11 12:33:02 +08:00
mwojcik 6ca1719033 comms: fix compilation on standalone 2023-11-14 14:08:31 +08:00
mwojcik aebc739c1e add support for tar flashable (sub)kernels 2023-11-13 11:24:23 +08:00
linuswck e1b2c45813 kasli_soc & zc706: Fix GTX Clock Path during INIT 2023-11-07 18:55:08 +08:00
linuswck e6372b9766 zynq_clocking: Allow ext signal to set cur_clk csr
- for example, current_clock csr can be connected to tx_init.done
2023-11-07 18:55:08 +08:00
linuswck 07044752b6 zynq_clocking: add ext_async_rst to AsyncRstSYNCR 2023-11-07 18:55:08 +08:00
linuswck 79fc5a7789 zynq_clocking: expose mmcm_locked for SYSCRG
- mmcm_locked -> self.mmcm_locked
2023-11-07 18:55:08 +08:00
mwojcik 6c8346ca5f subkernel: improve stability,
fix exception on awaiting message
2023-11-02 16:58:34 +08:00
mwojcik b76f634686 drtio: increase robustness for longer payloads 2023-11-02 14:48:52 +08:00
morgan 4a34777b97 refactor i2c, io_expander, task under the same cfg 2023-10-25 11:52:04 +08:00
morgan 43e4527392 fix kasli-soc demo compilation warning 2023-10-25 11:45:13 +08:00
mwojcik 0a3bfc9a61 subkernel: separate tags and data 2023-10-18 12:03:43 +08:00
Egor Savkin d3fbfd75b0 Fix grabber build and warning
Signed-off-by: Egor Savkin <es@m-labs.hk>
2023-10-18 11:24:43 +08:00
Egor Savkin b768d5648c Add grabber module
Signed-off-by: Egor Savkin <es@m-labs.hk>
2023-10-16 14:35:20 +08:00
Sebastien Bourdeauducq 812aea33b3 rustfmt 2023-10-11 17:56:30 +08:00