Firmware: Si549 and io_expander
io_expander: set CLK_SEL pin to output when si549 is used io_expander: gate virtual leds for standalone si549: add bit bang i2c si549: add si549 programming si549: add main & helper setuppull/282/head
parent
7827c7b803
commit
a1d80fb93b
|
|
@ -1,6 +1,7 @@
|
|||
use libboard_zynq::i2c;
|
||||
use log::info;
|
||||
|
||||
#[cfg(has_virtual_leds)]
|
||||
use crate::pl::csr;
|
||||
|
||||
// Only the bare minimum registers. Bits/IO connections equivalent between IC types.
|
||||
|
|
@ -19,11 +20,15 @@ const IODIR_OUT_SFP_LED: u8 = 0x40;
|
|||
const IODIR_OUT_SFP0_LED: u8 = 0x40;
|
||||
#[cfg(hw_rev = "v1.1")]
|
||||
const IODIR_OUT_SFP0_LED: u8 = 0x80;
|
||||
#[cfg(has_si549)]
|
||||
const IODIR_CLK_SEL: u8 = 0x80; // out
|
||||
#[cfg(has_si5324)]
|
||||
const IODIR_CLK_SEL: u8 = 0x00; // in
|
||||
|
||||
//IO expander port direction
|
||||
const IODIR0: [u8; 2] = [
|
||||
0xFF & !IODIR_OUT_SFP_TX_DISABLE & !IODIR_OUT_SFP0_LED,
|
||||
0xFF & !IODIR_OUT_SFP_TX_DISABLE & !IODIR_OUT_SFP_LED,
|
||||
0xFF & !IODIR_OUT_SFP_TX_DISABLE & !IODIR_OUT_SFP_LED & !IODIR_CLK_SEL,
|
||||
];
|
||||
|
||||
const IODIR1: [u8; 2] = [
|
||||
|
|
@ -33,6 +38,7 @@ const IODIR1: [u8; 2] = [
|
|||
|
||||
pub struct IoExpander {
|
||||
address: u8,
|
||||
#[cfg(has_virtual_leds)]
|
||||
virtual_led_mapping: &'static [(u8, u8, u8)],
|
||||
iodir: [u8; 2],
|
||||
out_current: [u8; 2],
|
||||
|
|
@ -42,17 +48,18 @@ pub struct IoExpander {
|
|||
|
||||
impl IoExpander {
|
||||
pub fn new(i2c: &mut i2c::I2c, index: u8) -> Result<Self, &'static str> {
|
||||
#[cfg(hw_rev = "v1.0")]
|
||||
#[cfg(all(hw_rev = "v1.0", has_virtual_leds))]
|
||||
const VIRTUAL_LED_MAPPING0: [(u8, u8, u8); 2] = [(0, 0, 6), (1, 1, 6)];
|
||||
#[cfg(hw_rev = "v1.1")]
|
||||
#[cfg(all(hw_rev = "v1.1", has_virtual_leds))]
|
||||
const VIRTUAL_LED_MAPPING0: [(u8, u8, u8); 2] = [(0, 0, 7), (1, 1, 6)];
|
||||
|
||||
#[cfg(has_virtual_leds)]
|
||||
const VIRTUAL_LED_MAPPING1: [(u8, u8, u8); 2] = [(2, 0, 6), (3, 1, 6)];
|
||||
|
||||
// Both expanders on SHARED I2C bus
|
||||
let mut io_expander = match index {
|
||||
0 => IoExpander {
|
||||
address: 0x40,
|
||||
#[cfg(has_virtual_leds)]
|
||||
virtual_led_mapping: &VIRTUAL_LED_MAPPING0,
|
||||
iodir: IODIR0,
|
||||
out_current: [0; 2],
|
||||
|
|
@ -66,6 +73,7 @@ impl IoExpander {
|
|||
},
|
||||
1 => IoExpander {
|
||||
address: 0x42,
|
||||
#[cfg(has_virtual_leds)]
|
||||
virtual_led_mapping: &VIRTUAL_LED_MAPPING1,
|
||||
iodir: IODIR1,
|
||||
out_current: [0; 2],
|
||||
|
|
|
|||
|
|
@ -35,7 +35,8 @@ pub mod drtio_eem;
|
|||
pub mod grabber;
|
||||
#[cfg(has_si5324)]
|
||||
pub mod si5324;
|
||||
|
||||
#[cfg(has_si549)]
|
||||
pub mod si549;
|
||||
use core::{cmp, str};
|
||||
|
||||
pub fn identifier_read(buf: &mut [u8]) -> &str {
|
||||
|
|
|
|||
|
|
@ -0,0 +1,326 @@
|
|||
use embedded_hal::prelude::_embedded_hal_blocking_delay_DelayUs;
|
||||
use libboard_zynq::timer::GlobalTimer;
|
||||
use log::info;
|
||||
|
||||
use crate::pl::csr;
|
||||
|
||||
#[cfg(feature = "target_kasli_soc")]
|
||||
const ADDRESS: u8 = 0x67;
|
||||
|
||||
const ADPLL_MAX: i32 = (950.0 / 0.0001164) as i32;
|
||||
|
||||
pub struct DividerConfig {
|
||||
pub hsdiv: u16,
|
||||
pub lsdiv: u8,
|
||||
pub fbdiv: u64,
|
||||
}
|
||||
|
||||
pub struct FrequencySetting {
|
||||
pub main: DividerConfig,
|
||||
pub helper: DividerConfig,
|
||||
}
|
||||
|
||||
mod i2c {
|
||||
use super::*;
|
||||
|
||||
#[derive(Clone, Copy)]
|
||||
pub enum DCXO {
|
||||
Main,
|
||||
Helper,
|
||||
}
|
||||
|
||||
fn half_period(timer: &mut GlobalTimer) {
|
||||
timer.delay_us(1)
|
||||
}
|
||||
|
||||
fn sda_i(dcxo: DCXO) -> bool {
|
||||
match dcxo {
|
||||
DCXO::Main => unsafe { csr::wrpll::main_dcxo_sda_in_read() == 1 },
|
||||
DCXO::Helper => unsafe { csr::wrpll::helper_dcxo_sda_in_read() == 1 },
|
||||
}
|
||||
}
|
||||
|
||||
fn sda_oe(dcxo: DCXO, oe: bool) {
|
||||
let val = if oe { 1 } else { 0 };
|
||||
match dcxo {
|
||||
DCXO::Main => unsafe { csr::wrpll::main_dcxo_sda_oe_write(val) },
|
||||
DCXO::Helper => unsafe { csr::wrpll::helper_dcxo_sda_oe_write(val) },
|
||||
};
|
||||
}
|
||||
|
||||
fn sda_o(dcxo: DCXO, o: bool) {
|
||||
let val = if o { 1 } else { 0 };
|
||||
match dcxo {
|
||||
DCXO::Main => unsafe { csr::wrpll::main_dcxo_sda_out_write(val) },
|
||||
DCXO::Helper => unsafe { csr::wrpll::helper_dcxo_sda_out_write(val) },
|
||||
};
|
||||
}
|
||||
|
||||
fn scl_oe(dcxo: DCXO, oe: bool) {
|
||||
let val = if oe { 1 } else { 0 };
|
||||
match dcxo {
|
||||
DCXO::Main => unsafe { csr::wrpll::main_dcxo_scl_oe_write(val) },
|
||||
DCXO::Helper => unsafe { csr::wrpll::helper_dcxo_scl_oe_write(val) },
|
||||
};
|
||||
}
|
||||
|
||||
fn scl_o(dcxo: DCXO, o: bool) {
|
||||
let val = if o { 1 } else { 0 };
|
||||
match dcxo {
|
||||
DCXO::Main => unsafe { csr::wrpll::main_dcxo_scl_out_write(val) },
|
||||
DCXO::Helper => unsafe { csr::wrpll::helper_dcxo_scl_out_write(val) },
|
||||
};
|
||||
}
|
||||
|
||||
pub fn init(dcxo: DCXO, timer: &mut GlobalTimer) -> Result<(), &'static str> {
|
||||
// Set SCL as output, and high level
|
||||
scl_o(dcxo, true);
|
||||
scl_oe(dcxo, true);
|
||||
// Prepare a zero level on SDA so that sda_oe pulls it down
|
||||
sda_o(dcxo, false);
|
||||
// Release SDA
|
||||
sda_oe(dcxo, false);
|
||||
|
||||
// Check the I2C bus is ready
|
||||
half_period(timer);
|
||||
half_period(timer);
|
||||
if !sda_i(dcxo) {
|
||||
// Try toggling SCL a few times
|
||||
for _bit in 0..8 {
|
||||
scl_o(dcxo, false);
|
||||
half_period(timer);
|
||||
scl_o(dcxo, true);
|
||||
half_period(timer);
|
||||
}
|
||||
}
|
||||
|
||||
if !sda_i(dcxo) {
|
||||
return Err("SDA is stuck low and doesn't get unstuck");
|
||||
}
|
||||
Ok(())
|
||||
}
|
||||
|
||||
pub fn start(dcxo: DCXO, timer: &mut GlobalTimer) {
|
||||
// Set SCL high then SDA low
|
||||
scl_o(dcxo, true);
|
||||
half_period(timer);
|
||||
sda_oe(dcxo, true);
|
||||
half_period(timer);
|
||||
}
|
||||
|
||||
pub fn stop(dcxo: DCXO, timer: &mut GlobalTimer) {
|
||||
// First, make sure SCL is low, so that the target releases the SDA line
|
||||
scl_o(dcxo, false);
|
||||
half_period(timer);
|
||||
// Set SCL high then SDA high
|
||||
sda_oe(dcxo, true);
|
||||
scl_o(dcxo, true);
|
||||
half_period(timer);
|
||||
sda_oe(dcxo, false);
|
||||
half_period(timer);
|
||||
}
|
||||
|
||||
pub fn write(dcxo: DCXO, data: u8, timer: &mut GlobalTimer) -> bool {
|
||||
// MSB first
|
||||
for bit in (0..8).rev() {
|
||||
// Set SCL low and set our bit on SDA
|
||||
scl_o(dcxo, false);
|
||||
sda_oe(dcxo, data & (1 << bit) == 0);
|
||||
half_period(timer);
|
||||
// Set SCL high ; data is shifted on the rising edge of SCL
|
||||
scl_o(dcxo, true);
|
||||
half_period(timer);
|
||||
}
|
||||
// Check ack
|
||||
// Set SCL low, then release SDA so that the I2C target can respond
|
||||
scl_o(dcxo, false);
|
||||
half_period(timer);
|
||||
sda_oe(dcxo, false);
|
||||
// Set SCL high and check for ack
|
||||
scl_o(dcxo, true);
|
||||
half_period(timer);
|
||||
// returns true if acked (I2C target pulled SDA low)
|
||||
!sda_i(dcxo)
|
||||
}
|
||||
|
||||
pub fn read(dcxo: DCXO, ack: bool, timer: &mut GlobalTimer) -> u8 {
|
||||
// Set SCL low first, otherwise setting SDA as input may cause a transition
|
||||
// on SDA with SCL high which will be interpreted as START/STOP condition.
|
||||
scl_o(dcxo, false);
|
||||
half_period(timer); // make sure SCL has settled low
|
||||
sda_oe(dcxo, false);
|
||||
|
||||
let mut data: u8 = 0;
|
||||
|
||||
// MSB first
|
||||
for bit in (0..8).rev() {
|
||||
scl_o(dcxo, false);
|
||||
half_period(timer);
|
||||
// Set SCL high and shift data
|
||||
scl_o(dcxo, true);
|
||||
half_period(timer);
|
||||
if sda_i(dcxo) {
|
||||
data |= 1 << bit
|
||||
}
|
||||
}
|
||||
// Send ack
|
||||
// Set SCL low and pull SDA low when acking
|
||||
scl_o(dcxo, false);
|
||||
if ack {
|
||||
sda_oe(dcxo, true)
|
||||
}
|
||||
half_period(timer);
|
||||
// then set SCL high
|
||||
scl_o(dcxo, true);
|
||||
half_period(timer);
|
||||
|
||||
data
|
||||
}
|
||||
}
|
||||
|
||||
fn write(dcxo: i2c::DCXO, reg: u8, val: u8, timer: &mut GlobalTimer) -> Result<(), &'static str> {
|
||||
i2c::start(dcxo, timer);
|
||||
if !i2c::write(dcxo, ADDRESS << 1, timer) {
|
||||
return Err("Si549 failed to ack write address");
|
||||
}
|
||||
if !i2c::write(dcxo, reg, timer) {
|
||||
return Err("Si549 failed to ack register");
|
||||
}
|
||||
if !i2c::write(dcxo, val, timer) {
|
||||
return Err("Si549 failed to ack value");
|
||||
}
|
||||
i2c::stop(dcxo, timer);
|
||||
Ok(())
|
||||
}
|
||||
|
||||
fn read(dcxo: i2c::DCXO, reg: u8, timer: &mut GlobalTimer) -> Result<u8, &'static str> {
|
||||
i2c::start(dcxo, timer);
|
||||
if !i2c::write(dcxo, ADDRESS << 1, timer) {
|
||||
return Err("Si549 failed to ack write address");
|
||||
}
|
||||
if !i2c::write(dcxo, reg, timer) {
|
||||
return Err("Si549 failed to ack register");
|
||||
}
|
||||
i2c::stop(dcxo, timer);
|
||||
|
||||
i2c::start(dcxo, timer);
|
||||
if !i2c::write(dcxo, (ADDRESS << 1) | 1, timer) {
|
||||
return Err("Si549 failed to ack read address");
|
||||
}
|
||||
let val = i2c::read(dcxo, false, timer);
|
||||
i2c::stop(dcxo, timer);
|
||||
Ok(val)
|
||||
}
|
||||
|
||||
fn setup(dcxo: i2c::DCXO, config: &DividerConfig, timer: &mut GlobalTimer) -> Result<(), &'static str> {
|
||||
i2c::init(dcxo, timer)?;
|
||||
|
||||
write(dcxo, 255, 0x00, timer)?; // PAGE
|
||||
write(dcxo, 69, 0x00, timer)?; // Disable FCAL override.
|
||||
write(dcxo, 17, 0x00, timer)?; // Synchronously disable output
|
||||
|
||||
// The Si549 has no ID register, so we check that it responds correctly
|
||||
// by writing values to a RAM-like register and reading them back.
|
||||
for test_value in 0..255 {
|
||||
write(dcxo, 23, test_value, timer)?;
|
||||
let readback = read(dcxo, 23, timer)?;
|
||||
if readback != test_value {
|
||||
return Err("Si549 detection failed");
|
||||
}
|
||||
}
|
||||
|
||||
write(dcxo, 23, config.hsdiv as u8, timer)?;
|
||||
write(dcxo, 24, (config.hsdiv >> 8) as u8 | (config.lsdiv << 4), timer)?;
|
||||
write(dcxo, 26, config.fbdiv as u8, timer)?;
|
||||
write(dcxo, 27, (config.fbdiv >> 8) as u8, timer)?;
|
||||
write(dcxo, 28, (config.fbdiv >> 16) as u8, timer)?;
|
||||
write(dcxo, 29, (config.fbdiv >> 24) as u8, timer)?;
|
||||
write(dcxo, 30, (config.fbdiv >> 32) as u8, timer)?;
|
||||
write(dcxo, 31, (config.fbdiv >> 40) as u8, timer)?;
|
||||
|
||||
write(dcxo, 7, 0x08, timer)?; // Start FCAL
|
||||
timer.delay_us(30_000); // Internal FCAL VCO calibration
|
||||
write(dcxo, 17, 0x01, timer)?; // Synchronously enable output
|
||||
|
||||
Ok(())
|
||||
}
|
||||
|
||||
pub fn main_setup(timer: &mut GlobalTimer, settings: &FrequencySetting) -> Result<(), &'static str> {
|
||||
unsafe {
|
||||
csr::wrpll::main_dcxo_bitbang_enable_write(1);
|
||||
csr::wrpll::main_dcxo_i2c_address_write(ADDRESS);
|
||||
}
|
||||
|
||||
setup(i2c::DCXO::Main, &settings.main, timer)?;
|
||||
|
||||
// Si549 maximum settling time for large frequency change.
|
||||
timer.delay_us(40_000);
|
||||
|
||||
unsafe {
|
||||
csr::wrpll::main_dcxo_bitbang_enable_write(0);
|
||||
}
|
||||
|
||||
info!("Main Si549 started");
|
||||
Ok(())
|
||||
}
|
||||
|
||||
pub fn helper_setup(timer: &mut GlobalTimer, settings: &FrequencySetting) -> Result<(), &'static str> {
|
||||
unsafe {
|
||||
csr::wrpll::helper_reset_write(1);
|
||||
csr::wrpll::helper_dcxo_bitbang_enable_write(1);
|
||||
csr::wrpll::helper_dcxo_i2c_address_write(ADDRESS);
|
||||
}
|
||||
|
||||
setup(i2c::DCXO::Helper, &settings.helper, timer)?;
|
||||
|
||||
// Si549 maximum settling time for large frequency change.
|
||||
timer.delay_us(40_000);
|
||||
|
||||
unsafe {
|
||||
csr::wrpll::helper_reset_write(0);
|
||||
csr::wrpll::helper_dcxo_bitbang_enable_write(0);
|
||||
}
|
||||
info!("Helper Si549 started");
|
||||
Ok(())
|
||||
}
|
||||
|
||||
fn set_adpll(dcxo: i2c::DCXO, adpll: i32) -> Result<(), &'static str> {
|
||||
if adpll.abs() > ADPLL_MAX {
|
||||
return Err("adpll is too large");
|
||||
}
|
||||
|
||||
match dcxo {
|
||||
i2c::DCXO::Main => unsafe {
|
||||
if csr::wrpll::main_dcxo_bitbang_enable_read() == 1 {
|
||||
return Err("Main si549 bitbang mode is active when using gateware i2c");
|
||||
}
|
||||
|
||||
while csr::wrpll::main_dcxo_adpll_busy_read() == 1 {}
|
||||
if csr::wrpll::main_dcxo_nack_read() == 1 {
|
||||
return Err("Main si549 failed to ack adpll write");
|
||||
}
|
||||
|
||||
csr::wrpll::main_dcxo_i2c_address_write(ADDRESS);
|
||||
csr::wrpll::main_dcxo_adpll_write(adpll as u32);
|
||||
|
||||
csr::wrpll::main_dcxo_adpll_stb_write(1);
|
||||
},
|
||||
i2c::DCXO::Helper => unsafe {
|
||||
if csr::wrpll::helper_dcxo_bitbang_enable_read() == 1 {
|
||||
return Err("Helper si549 bitbang mode is active when using gateware i2c");
|
||||
}
|
||||
|
||||
while csr::wrpll::helper_dcxo_adpll_busy_read() == 1 {}
|
||||
if csr::wrpll::helper_dcxo_nack_read() == 1 {
|
||||
return Err("Helper si549 failed to ack adpll write");
|
||||
}
|
||||
|
||||
csr::wrpll::helper_dcxo_i2c_address_write(ADDRESS);
|
||||
csr::wrpll::helper_dcxo_adpll_write(adpll as u32);
|
||||
|
||||
csr::wrpll::helper_dcxo_adpll_stb_write(1);
|
||||
},
|
||||
};
|
||||
|
||||
Ok(())
|
||||
}
|
||||
Loading…
Reference in New Issue