Thomas Harty
ac5c4913ec
Sayma RTM: hold hmc7043 in reset/mute state during init.
2018-06-05 19:22:04 +08:00
Florent Kermarrec
b82158a2de
firmware/ad9154: add stpl test
2018-06-05 02:08:57 +02:00
07d4145a35
correct documented siphaser VCO frequency [NFC]
2018-06-04 20:53:43 +08:00
Florent Kermarrec
925b47b077
firmware/ad9154: reset the dac between each configuration attempt
2018-06-04 14:03:26 +02:00
bb87976d4f
suservo: docstring fixes, revert parametrization of r_rtt
2018-06-04 07:27:17 +00:00
07a1425e51
SUservo EEM docs
...
add documentation to eem.SUServo. Change parameterization of t_rtt to include delays on Sampler, as this seems simpler and more robust to changing RTIO frequencies in the future.
c.f. #1046
2018-06-04 08:51:28 +02:00
whitequark
d686d33093
runtime: print hex dumps around PC/EA in case of exception.
...
For #1026 .
2018-06-01 21:17:59 +00:00
whitequark
985fd7377b
artiq_rpctool: use inspect.formatargspec instead of a NIH formatter.
...
Fixes #1029 .
2018-06-01 19:18:14 +00:00
whitequark
f1a80f12f8
doc: note that coreanalyzer lacks SAWG support.
...
Closes #1035 .
2018-06-01 18:47:37 +00:00
62deffa7d2
opticlock: fix core device name
2018-06-01 15:39:23 +00:00
f50aef1a22
suservo: extract boilerplate
...
closes #1041
2018-06-01 15:37:07 +00:00
5de2d06568
ad53xx/zotino: do not clear power down on overtemp
2018-06-01 13:17:13 +00:00
2c344686d9
ad53xx/zotino: enable overtemp shutdown and readback control
2018-06-01 13:06:52 +00:00
b56d37eb63
manual: fix table
2018-06-01 14:22:15 +02:00
87d3ac9d25
suservo: swap transfer function parametrization
...
The integrator is now parametrized through its gain and not the PI
corner frequency. The integrator gain limit is given in absolute gain
units and not relative to the proportional gain.
close #1033
2018-06-01 09:38:18 +00:00
e408241233
sawg: work around compiler not accepting delay_mu(int32)
2018-06-01 15:42:37 +08:00
f5d55c6902
sawg: add 1 coarse RTIO cycle between spline resets
...
This keeps all events in the same SED lane and limits the number of SED lanes required.
Closes #1038
2018-06-01 15:15:24 +08:00
22506e849f
suservo: clarify timings
...
close #1027
2018-06-01 06:35:38 +00:00
a42f774440
suservo: document offset range limits
...
close #1034
2018-05-31 16:55:44 +00:00
36dcea3edf
suservo: refactor y_mu_to_full_scale as portable
...
close #1032
2018-05-31 16:44:14 +00:00
e136709cac
suservo: document gain state
...
close #1030
2018-05-31 16:36:53 +00:00
5dbdc5650c
suservo: document set_config and get_status more
...
close #1028
2018-05-31 16:32:05 +00:00
e1b0fcc24e
suservo: add documentation on settings and setup
...
close #1015
2018-05-31 16:21:09 +00:00
9b5a46dffd
suservo: fix restart counter assertion
...
c.f. #788
2018-05-31 15:56:11 +00:00
58f71e34fc
doc: add hut2 and lasersdk controller default ports
2018-05-31 14:23:57 +00:00
38b5128222
conda: bump jesd204
2018-05-30 23:39:22 +08:00
Paweł
44c7a028cb
Added second argument to DIO.add_STD in master and satellite variant of kasli (now builds properly)
2018-05-30 22:49:40 +08:00
8fd57e6ccb
kasli_tester: add Sampler and Zotino support
2018-05-29 22:36:42 +08:00
d1df18ae6a
monkey_patches: work around Python issue 33678. Closes #1016
2018-05-29 17:51:41 +08:00
whitequark
2e09307d8d
firmware: use writeln instead of write in UART logger.
2018-05-29 03:16:52 +00:00
560889372f
firmware: grabber support
2018-05-29 10:26:36 +08:00
b860302a9a
firmware: fix typo in UART logger
2018-05-28 17:25:23 +00:00
whitequark
2b7d98eb04
firmware: enable all log levels when creating UART logger.
...
The default is all off.
2018-05-28 16:49:25 +00:00
ad099edf63
kasli: integrate grabber
2018-05-28 22:43:40 +08:00
563e434e15
eem: finalize grabber support
2018-05-28 22:43:06 +08:00
2612fd1e72
rtio: add grabber deserializer and WIP PHY encapsulation
2018-05-28 22:42:27 +08:00
Florent Kermarrec
e21f14c0b3
serwb/phy: typo (KUSSerdes --> KUSerdes)
2018-05-28 10:41:11 +02:00
c2890c6cf0
kasli_tester: initialize DDS channels
2018-05-28 14:24:39 +08:00
b20a8c86b0
kasli: don't bother with grabber ttls for now
...
not used on target cameras
2018-05-28 07:31:00 +02:00
80c69da17e
eem: add Grabber IOs and CC
2018-05-28 11:16:23 +08:00
4d3f763865
move kasli_opticlock to kasli_basic
2018-05-28 11:02:44 +08:00
cc0ddf9d72
artiq_flash: do not check variants anymore
...
Not very useful and adds to the maintainance when building new Kasli systems.
2018-05-28 10:59:01 +08:00
bb248970df
style
2018-05-28 10:40:05 +08:00
56cfe77c91
environment: spelling
2018-05-27 20:36:11 +02:00
b09d07905c
kasli: add LUH/PTB/HUB variants
...
and refactor/simplify variant selection
2018-05-27 18:33:27 +00:00
whitequark
db4d1878d3
compiler: remove debug print.
2018-05-25 09:37:18 +00:00
whitequark
da851d8b7b
conda: fix installation path in artiq-board.
2018-05-25 08:41:55 +00:00
whitequark
bc86ade160
conda: add ignore_prefix_files in the outputs section too.
2018-05-25 08:41:19 +00:00
whitequark
c3c9ffcd4f
conda: override --install-lib, not --prefix.
2018-05-25 06:45:46 +00:00
whitequark
223b984385
Fix non-exception-safe finally: handlers.
...
Fixes #1013 .
2018-05-25 04:23:32 +00:00
