srenblad
/
artiq
forked from M-Labs/artiq
1
0
Fork 0
Code Pull Requests Activity
7,267 Commits 63 Branches 34 Tags 19 MiB
Commit Graph

7267 Commits

Author SHA1 Message Date
Sebastien Bourdeauducq 251a0101a6 compiler: support disabling now-pinning 2020-04-26 12:38:43 +08:00
Sebastien Bourdeauducq d19f28fa84 kasli: v2 clocking WIP, remove SFP LEDs from RTIO 2020-04-23 23:02:18 +08:00
Sebastien Bourdeauducq 9bc43b2dbf kasli: support EEPROM on v2 2020-04-23 23:00:36 +08:00
Sebastien Bourdeauducq 77e6fdb7a7 artiq_flash: cleanup Sayma RTM management, support flashing AMC with RTM disconnected 2020-04-14 18:22:06 +08:00
Robert Jördens ea79ba4622 ttl_serdes: detect edges on short pulses 
Edges on pulses shorter than the RTIO period were missed because the
reference sample and the last sample of the serdes word are the same.

This change enables detection of edges on pulses as short as the
serdes UI (and shorter as long as the pulse still hits a serdes sample
aperture).

In any RTIO period, only the leading event corresponding to the first
edge with slope according to sensitivity is registerd. If the channel is
sensitive to both rising and falling edges and if the pulse is contained
within an RTIO period, or if it is sensitive only to one edge slope and
there are multiple pulses in an RTIO period, only the leading event is
seen. Thus this possibility of lost events is still there. Only the
conditions under which loss occurs are reduced.

In testing with the kasli-ptb6 variant, this also improves resource
usage (a couple hundred LUT) and timing (0.1 ns WNS).
 2020-04-13 13:21:03 +02:00
Sebastien Bourdeauducq e8b73876ab comm_kernel: add Zynq runtime identifier 2020-04-12 17:25:14 +08:00
Sebastien Bourdeauducq de57039e6e comm_kernel: cleanup 2020-04-12 16:02:36 +08:00
Sebastien Bourdeauducq 9dc24f255e comm_kernel: remove dead code 2020-04-12 15:06:46 +08:00
Sebastien Bourdeauducq fb0ade77a9 firmware: fix non-DRTIO build 2020-04-10 17:23:17 +08:00
Sebastien Bourdeauducq ec7b2bea12 sayma: round FTW like Urukul in JDCGSyncDDS 2020-04-08 15:00:33 +08:00
Sebastien Bourdeauducq 0f4be22274 sayma: add simple sychronized DDS for testing 2020-04-08 14:13:54 +08:00
Sebastien Bourdeauducq 3c823a483a sayma: improve DAC sync messaging (again) 2020-04-06 22:36:43 +08:00
Sebastien Bourdeauducq 4d601c2102 sayma: improve DAC sync messaging 2020-04-06 22:36:03 +08:00
Sebastien Bourdeauducq 61d4614b61 sayma: fix/cleanup DRTIO-DAC sync interaction 2020-04-06 22:34:05 +08:00
Sebastien Bourdeauducq facc0357d8 drtio: make sure receive buffer is drained after ping reply 2020-04-06 22:33:15 +08:00
Sebastien Bourdeauducq ffd3172e02 sayma: move SYSREF DDMTD to RTM (#795) 2020-04-06 00:01:28 +08:00
Sebastien Bourdeauducq 8f608fa2fa examples/sines_urukul_sayma: adapt for sayma v2, use 1 DAC only 2020-04-05 16:51:40 +08:00
Etienne Wodey 90d08988b2 language/environment: BooleanValue: fix type detection 
Signed-off-by: Etienne Wodey <wodey@iqo.uni-hannover.de>
 2020-04-04 15:37:04 +08:00
Etienne Wodey 9b03a365ed language/environment: cast argument processor default values early 
Fixes #1434. Also add unit tests for some argument processors.

Signed-off-by: Etienne Wodey <wodey@iqo.uni-hannover.de>
 2020-04-04 15:37:04 +08:00
Sebastien Bourdeauducq 371d923385 manual: nixpkgs 20.03 2020-04-04 13:05:46 +08:00
Sebastien Bourdeauducq 9294efabc0 manual: Kasli can get MAC address from EEPROM 2020-03-14 12:19:43 +08:00
Sebastien Bourdeauducq 4a8d361ace soc: optimize programmable identifier 2020-03-12 23:09:13 +08:00
Sebastien Bourdeauducq 9e66dd7075 soc: reprogrammable identifier 2020-03-12 22:23:08 +08:00
Robert Jördens 380de177e7 rtio: fix wide output after RTIO refactoring 
fixes 3d0c3cc1cf
 2020-03-05 17:55:27 +00:00
Robert Jördens e803830b3b fastino: support wide RTIO interface and channel groups 2020-03-05 17:55:04 +00:00
Sebastien Bourdeauducq 8dbf30b23e manual: mention integrated Kasli JTAG 2020-03-02 18:42:01 +08:00
Sebastien Bourdeauducq 8451e58fbe ad9912: fix ftw width docstring 2020-02-27 02:11:12 +08:00
Paweł K 2a909839ff
artiq_flash: added option of specifying another username when connecting through SSH. (#1429) 
Signed-off-by: Paweł Kulik <pawel.kulik@creotech.pl>
 2020-02-19 19:44:11 +08:00
Sebastien Bourdeauducq 6d26def3ce sayma: drive filtered_clk_sel on master variant 2020-02-06 22:28:49 +08:00
Sebastien Bourdeauducq 52ec849008 sayma: fix sysref_delay_dac 2020-02-05 19:04:01 +08:00
Sebastien Bourdeauducq c7de1f2e6b metlino: drive clock muxes 2020-02-05 00:06:34 +08:00
Sebastien Bourdeauducq bf9f4e380a si5324: program I2C mux on Metlino 2020-02-03 18:07:59 +08:00
Sebastien Bourdeauducq ffb24e9fff artiq_flash: use correct proxy bitstream for Metlino 2020-02-03 18:07:26 +08:00
Sebastien Bourdeauducq 5f8e20b1a1 artiq_sinara_tester: fix device_db filename 2020-01-31 10:26:58 +08:00
Sebastien Bourdeauducq dfa033eb87 wrpll: new collector from Weida/Tom 2020-01-24 10:31:52 +08:00
Sebastien Bourdeauducq dee16edb78 wrpll: DDMTD sampler double latching 2020-01-22 19:16:26 +08:00
Sebastien Bourdeauducq f4d8f77268 turn kasli_tester into a frontend tool 2020-01-21 16:13:04 +08:00
Sebastien Bourdeauducq bfcbffcd8d update smoltcp 
This disables the 'log' features which does not compile, and may break net_trace. To be investigated later.
 2020-01-21 13:58:23 +08:00
Sebastien Bourdeauducq 82cdb7f933 typo 2020-01-21 10:07:13 +08:00
Robert Jördens 248230a89e fastino: style 2020-01-20 13:25:00 +01:00
Robert Jördens c45a872cba fastino: fix init, set_cfg 2020-01-20 13:25:00 +01:00
Robert Jördens 2c4e5bfee4 fastino: add [WIP] 2020-01-20 13:25:00 +01:00
Sebastien Bourdeauducq 8f9948a1ff kasli_sawgmaster: add basemod programming example 2020-01-20 20:14:24 +08:00
Sebastien Bourdeauducq e427aaaa66 basemod_att: fix imports 2020-01-20 20:14:24 +08:00
Sebastien Bourdeauducq 62a52cb086 sayma: do not pollute the log with DAC status on success 2020-01-20 20:14:24 +08:00
Sebastien Bourdeauducq 6b428ef3be sayma: initialize DAC before testing jesd::ready 2020-01-20 20:14:24 +08:00
Robert Jördens 7ab0282234 adf5355: style 2020-01-20 13:13:08 +01:00
Robert Jördens 9368c26d1c mirny: add to manual 2020-01-20 13:13:08 +01:00
Etienne Wodey da531404e8 artiq_ddb_template: add Mirny support 
Signed-off-by: Etienne Wodey <wodey@iqo.uni-hannover.de>
 2020-01-20 13:13:08 +01:00
Robert Jördens 01a6e77d89 mirny: add 
* This targets unrelease CPLD gateware (https://github.com/quartiq/mirny/issues/1)
* includes initial coredevice driver, eem shims, and kasli_generic tooling
* addresses the ARTIQ side of #1130
* Register abstraction to be written

Signed-off-by: Robert Jördens <rj@quartiq.de>
 2020-01-20 13:13:08 +01:00