4410-4412: remove mention of external sync signal distribution

Updates #38
This commit is contained in:
occheung 2022-06-08 17:21:27 +08:00
parent ac639b9d1e
commit b86eea7611
1 changed files with 0 additions and 7 deletions

View File

@ -721,9 +721,6 @@ The following table summarizes the required setting for each mode.
\end{multicols}
Note for Default mode: Switching on DIP Switch 3 enables the options that distribute the synchronization signals externally.
However, ARTIQ \& the core device (Kasli/Kasli-SoC) do not interact with these signals.
\section{Urukul 1-EEM/2-EEM Modes}
4410/4412 DDS Urukul can operate with either 1 or 2 EEM connections.
It is in 1-EEM mode when only EEM0 is connected, 2-EEM mode when both EEM0 \& EEM1 are connected.
@ -737,10 +734,6 @@ It is in 1-EEM mode when only EEM0 is connected, 2-EEM mode when both EEM0 \& EE
\item SU-Servo (4410 DDS Urukul feature) \\
SU-Servo requires both EEM0 \& EEM1 to control multiple DDS channels simultaneously using the QSPI interface.
\item Distribute synchronization signals from Urukul (4410 DDS Urukul feature) \\
Synchronization signals can only be distributed externally through EEM1.
ARTIQ \& the core device (Kasli/Kasli-SoC) will never interact with these signals.
\end{itemize}
\newpage