From b86eea7611740a3f625925622895f5991c4d9574 Mon Sep 17 00:00:00 2001 From: occheung Date: Wed, 8 Jun 2022 17:21:27 +0800 Subject: [PATCH] 4410-4412: remove mention of external sync signal distribution Updates #38 --- 4410-4412.tex | 7 ------- 1 file changed, 7 deletions(-) diff --git a/4410-4412.tex b/4410-4412.tex index b7839fa..e462521 100644 --- a/4410-4412.tex +++ b/4410-4412.tex @@ -721,9 +721,6 @@ The following table summarizes the required setting for each mode. \end{multicols} -Note for Default mode: Switching on DIP Switch 3 enables the options that distribute the synchronization signals externally. -However, ARTIQ \& the core device (Kasli/Kasli-SoC) do not interact with these signals. - \section{Urukul 1-EEM/2-EEM Modes} 4410/4412 DDS Urukul can operate with either 1 or 2 EEM connections. It is in 1-EEM mode when only EEM0 is connected, 2-EEM mode when both EEM0 \& EEM1 are connected. @@ -737,10 +734,6 @@ It is in 1-EEM mode when only EEM0 is connected, 2-EEM mode when both EEM0 \& EE \item SU-Servo (4410 DDS Urukul feature) \\ SU-Servo requires both EEM0 \& EEM1 to control multiple DDS channels simultaneously using the QSPI interface. - \item Distribute synchronization signals from Urukul (4410 DDS Urukul feature) \\ - Synchronization signals can only be distributed externally through EEM1. - ARTIQ \& the core device (Kasli/Kasli-SoC) will never interact with these signals. - \end{itemize} \newpage