occheung/zynq-rs
1
0
Fork 0
forked from M-Labs/zynq-rs
Code Issues Pull Requests Projects Releases Wiki Activity
649 Commits 3 Branches 0 Tags 1.4 MiB
i2c-nack
Commit Graph

169 Commits

Author SHA1 Message Date
occheung
9f4503a94c eeprom: check I2C (n)ack on read/write 2024-09-06 16:25:14 +08:00
morgan
4168eb63a7 GIC: fix wrong core target config when enabling interrupt (#109) 
# Summary

- Before the patch, an extra 1 is added to `target_cpu` and the interrupt will be configured to the wrong CPU target.

| target_cpu | bits set before patch | bits set after patch   |
| -----------| -----------                      | -----------                       |
| core0      | 0b10 (enable interrupt on core1) | 0b01 (enable interrupt on core0)  |
| core1      | 0b11 (enable interrupt on core0 & core1)| 0b10 (enable interrupt on core1) |

- [Correct ICDIPTR Register configuration from AMD](https://docs.xilinx.com/r/en-US/ug585-zynq-7000-SoC-TRM/Software-Generated-Interrupts-SGI?tocId=0TsxAmy8MHRPDsayG96K1Q)

Reviewed-on: M-Labs/zynq-rs#109
Co-authored-by: morgan <mc@m-labs.hk>
Co-committed-by: morgan <mc@m-labs.hk>
 2023-12-19 18:41:03 +08:00
mwojcik
0106430805 remove gpio reset 2023-10-18 17:33:19 +08:00
jmatyas
c15b54f92b kasli-soc: add support for PHY_RST GPIO 2023-08-31 12:58:59 +02:00
esavkin
0a3a777652 Fix soft_rst bit, add reboot function 2022-10-07 12:57:56 +08:00
mwojcik
42cc256812 add error led 2022-08-26 17:22:42 +08:00
mwojcik
1c8e2c318c eth phy: reset page to 0 on kasli-soc for ident 2022-03-10 17:11:41 +08:00
mwojcik
c4c52c33b4 eth phy: use unreachable!() for impossible values 2022-03-10 16:45:29 +08:00
mwojcik
072fd5f015 eth phy: set LEDs only on Kasli-SoC 2022-03-10 16:42:25 +08:00
mwojcik
2b3c7e4b2f eth leds: 
* break led0 from led1 - similar, but not the same settings (led2 not implemented)
* fix values, make it compilable
* set default behavior (one led for link, other for activity)
 2022-03-10 16:42:25 +08:00
mwojcik
84d6d391ce libboard_zynq: eth phy for Marvell 88E1518 
* add support for LED control registers
* support for registers on different pages
 2022-03-10 16:42:25 +08:00
mwojcik
3e95df1f64 pca954x_select: api supports no channel enabled 2022-02-11 13:46:51 +08:00
mwojcik
26ab2927b9 pca954x: log detected type 2022-02-11 12:00:39 +08:00
mwojcik
dacc816eb4 pca954x: improve code, fix I2C_SW_RESET behavior 2022-02-11 11:22:53 +08:00
mwojcik
14b0247716 pca954x: fix to work on cold boot 2022-02-09 17:23:33 +08:00
mwojcik
bc41b91192 adjust pca address 2022-02-08 16:39:12 +08:00
mwojcik
3efc682bd6 add pca954x autodetection, pca9547 support 2022-02-08 15:40:17 +08:00
Sebastien Bourdeauducq
2c161720fa revert a11cb852a8 2021-07-05 13:45:22 +08:00
topquark12
a42e5a95ff phy: fix issue 78, scan PHY MDIO addr starting at 0 2021-07-05 13:25:22 +08:00
Sebastien Bourdeauducq
b0ec74d764 i2c: half_period -> unit_delay 2021-06-25 16:26:53 +08:00
Sebastien Bourdeauducq
4159aab6c8 i2c: conservative timing, avoid SCL/SDA races. Closes #83 2021-06-25 16:26:04 +08:00
Sebastien Bourdeauducq
d18c77c0eb i2c: fix error messages 2021-06-25 16:23:50 +08:00
Sebastien Bourdeauducq
411eebd96c i2c: configure I2C_SW_RESET MIO on Kasli-SoC 2021-06-19 18:49:51 +08:00
Sebastien Bourdeauducq
a11cb852a8 libboard_zynq: work around Kasli-SoC MDIO breakage (#78) 2021-05-29 12:50:28 +08:00
Astro
bf9f1e33c8 update smoltcp 0.6.0 -> 0.7.0 2021-02-04 18:29:00 +01:00
Astro
05c30dd52e Revert "update smoltcp 0.6.0 -> 0.7.0" 
This reverts commit ccf758cc85.
 2021-02-04 18:27:42 +01:00
Astro
f816a04cef Revert "Revert "update smoltcp 0.6.0 -> 0.7.0"" 
This reverts commit faa64c2ce8.
 2021-02-04 16:22:39 +01:00
Astro
faa64c2ce8 Revert "update smoltcp 0.6.0 -> 0.7.0" 
This reverts commit ccf758cc85.

Blocked by: https://github.com/smoltcp-rs/smoltcp/issues/415
 2021-02-04 16:22:16 +01:00
Astro
ccf758cc85 update smoltcp 0.6.0 -> 0.7.0 2021-02-03 22:41:32 +01:00
Astro
1cd4056370 libboard_zynq: remove unused eth phy name information 2020-11-20 17:21:38 +01:00
Astro
ddff295ae1 libboard_zynq: implement eth hot-plugging 2020-11-20 17:12:22 +01:00
Astro
379b6b973a libboard_zynq: add support for target_kasli_soc's Marvell88E1512 eth phy 2020-11-19 20:38:10 +01:00
Astro
3172aba1a8 libboard_zynq: improve i2c doc 2020-11-19 20:26:48 +01:00
Astro
975202a653 libboard_zynq: enable i2c+eeprom for target_kasli_soc 2020-11-19 20:17:36 +01:00
Astro
a3eabf1947 libboard_zynq: prepare target_kasli_soc 2020-11-19 19:28:17 +01:00
Astro
a32d7abb9a libboard_zynq: rename ddr DCI_FREQ to DCI_MAX_FREQ 2020-11-19 19:21:38 +01:00
Astro
0714162113 rename target_cora_z7_10 to target_coraz7 globally 2020-11-13 17:56:47 +01:00
Astro
5b2c779cba libboard_zynq: delint ps7_init 2020-11-13 00:23:56 +01:00
Astro
0a40d4f36d libboard_zynq: fix zc706 build 2020-11-13 00:23:38 +01:00
Astro
55f8d02da8 libboard_zynq: remove ddr-only ps7_init for redpitaya 2020-11-13 00:12:43 +01:00
Astro
990fa56d6a libboard_zynq: complete ddr without ps7_init for redpitaya 2020-11-13 00:10:34 +01:00
Astro
8fd317d580 libboard_zynq: remove ps7_init for cora_z7_10 2020-11-11 14:21:48 +01:00
Astro
07fedddad9 libboard_zynq: doc ddr size limitation, correct target_redpitaya to 512MB 2020-11-11 13:25:55 +01:00
Astro
dffe3cb251 libboard_zynq: rm superfluous ddr settings for cora_z7_10 2020-11-10 20:53:46 +01:00
Astro
b9323653bb libboard_zynq: complete ddr without ps7_init for cora_z7_10 2020-11-10 14:33:31 +01:00
Astro
515d3bb381 libboard_zynq: configure ddr while keeping rstb low 2020-11-08 22:47:59 +01:00
Astro
7e22010d7d libboard_zynq: fix pll_cp/pll_res swap in ClockSource::setup() 2020-11-08 22:46:43 +01:00
Astro
9ee77d8f44 libboard_zynq: indent ps7_init/cora_z7_10 2020-11-08 19:32:31 +01:00
Astro
e508b78b3e libboard_zynq: add ps7_init for cora_z7_10 2020-11-08 19:28:59 +01:00
pca006132
f60d0589cc fix ps7_init compilation error and warnings 2020-10-01 00:17:47 +08:00