e2cb0e107f
pipistrello: really do not request xtrig
2015-06-28 21:11:41 -06:00
23eee94458
pipistrello: add notes to nist_qc1 about dds_clock
...
* remove xtrig from the target as it is not usually connected (used for
dds_clock) and ignore PMT2/BTN2 as C:15 is used for dds_clock.
* this also aligns the ttl channel numbers with kc705/nist_qc1 (two pmt
inputs followed by 16 ttl outputs followed by leds)
2015-06-28 20:56:12 -06:00
944bfafefa
soc: support QC2 and AD9914 (untested)
2015-06-28 21:37:27 +02:00
a7bbcdc1ad
targets/pipistrello: mon -> moninj
2015-06-27 21:15:17 +02:00
5b3eac1d96
pipistrello: tweak fifo depths a bit
...
ise being dull again, inferring all but one 64x64 fifo as bram...
minimum bram depth is 256 anyway
2015-06-22 23:25:07 -06:00
cd249b2f66
pipistrello: run at 83+1/3 MHz, cleanup CRG
2015-06-22 19:03:00 -06:00
9f3f9255a2
soc: increase DDS output FIFO sizes
2015-06-21 08:40:10 -06:00
5a9bdb2e33
DDS monitoring
2015-06-19 15:30:17 -06:00
03fe71228b
dds: phase computation fixes
2015-06-19 11:01:43 -06:00
3636025e69
pipistrello: smaller L2 cache
2015-06-18 09:49:52 -06:00
Florent Kermarrec
38a0f63bd2
gateware/soc: use Minicon SDRAM controller and 128KB shared L2 cache
2015-06-18 12:18:03 +02:00
b2af0f6cc3
soc,runtime: support TTL override
2015-06-09 19:51:02 +08:00
a2ae5e4706
runtime: report TTL status over UDP
2015-06-03 18:26:19 +08:00
b81151eb42
soc: rtio monitor
2015-06-02 17:41:40 +08:00
a36c51eb83
DDS over RTIO (batch mode not supported yet)
2015-05-08 14:44:39 +08:00
a61d701d47
rtio: decouple PHY reset from logic reset
2015-05-02 11:47:11 +08:00
62669f9ff2
soc: factor timer, kernel CPU and mailbox
2015-05-01 18:51:24 +08:00
967145f2dc
watchdog support on core device (broken by bug similar to issue #19 )
2015-04-29 12:58:37 +08:00
86c012924e
targets: rename AMP->Top, merge peripherals
2015-04-28 00:18:54 +08:00
938e1c2842
Remove UP support.
...
The only advantage of UP is to support the Papilio Pro, but that port is also very limited in other ways and the Pipistrello provides a more reasonable platform that also supports AMP.
On the other hand, RPCs on UP are difficult to implement with the session.c protocol system (without an operating system or coroutines), along with many other minor difficulties and maintainance issues. Planned features such as watchdogs in the core device are also difficult on UP.
2015-04-27 20:43:45 +08:00
546996f896
coredevice,runtime: put ref_period into the ddb
2015-04-16 15:15:38 +08:00
61a6506484
targets/pipistrello: add mailbox memory region
2015-04-15 20:41:28 +08:00
f988ec318e
pipistrello: fix csrs, make AMP default
2015-04-14 21:10:07 -06:00
70916aa0c5
pipistrello: tig _all_ async paths, add timing interference report
2015-04-14 18:18:48 -06:00
066adbdeac
pipistrello: timing report
2015-04-14 18:18:16 -06:00
6217cf5392
pipistrello: basesoc, cleanup
2015-04-14 18:18:16 -06:00
4c10182c9f
rtio: refactor, use rtlink
2015-04-14 19:44:45 +08:00
c0f1708c20
targets/pipstrello: fix mem_map
2015-04-14 19:34:14 +08:00
Florent Kermarrec
24b2bd7b6f
soc/targets: use mem_map, fix addressing conflict on UP between ethernet and dds
2015-04-11 21:32:11 +08:00
44304a33b2
soc,runtime: define RTIO FUD channel number in targets
2015-04-09 00:35:11 +08:00
7e591bb1c7
targets: use _Peripherals/UP/AMP class names, share QC1 IO defs
2015-04-07 00:07:53 +08:00
ef375b5c9c
pipistrello: add double-cpu
2015-04-04 20:52:08 -06:00
afc3982555
pipistrello: refactor single-cpu
2015-04-04 20:51:47 -06:00
0ae4492077
pipistrello: use mem_decoder
2015-04-04 20:51:47 -06:00
e50661dac4
pipistrello: fix dcm parameters, move leds, fix names
2015-04-04 20:51:47 -06:00
Florent Kermarrec
2995f0a705
remove use of _r prefix on CSRs
2015-04-02 18:30:44 +08:00
88a1707ef9
soc: use new location of gpio module
2015-04-02 17:19:00 +08:00
fdca0a71ff
add ARTIQMidiSoC based on pipistrello
2015-03-19 11:37:15 -06:00
