|
|
9c8b21b3f4
|
phaser: let link settle a bit longer before starting
|
2016-10-12 16:13:34 +02:00 |
|
|
|
9880b1ebd0
|
phaser: update README
|
2016-10-12 16:01:07 +02:00 |
|
|
|
0d1ed247e2
|
phaser: tweak sawg example
|
2016-10-12 16:01:07 +02:00 |
|
|
|
2d14864c6d
|
Revert "phaser: 500 MHz dacclock"
This reverts commit 5f737bef76.
|
2016-10-12 16:01:07 +02:00 |
|
Florent Kermarrec
|
12b8598b84
|
stpl: fix byte ordering
|
2016-10-12 15:59:27 +02:00 |
|
|
|
9644a3a362
|
ad9154: mix mode addr, digital gain must be on
|
2016-10-12 15:00:53 +02:00 |
|
|
|
4376ef5615
|
phaser: slow down spi a bit
|
2016-10-12 14:37:43 +02:00 |
|
|
|
3f1d96b68d
|
phaser: tweak dac_setup
|
2016-10-12 14:22:57 +02:00 |
|
|
|
466d1e8304
|
phaser: update stpl
|
2016-10-12 14:22:21 +02:00 |
|
|
|
5f737bef76
|
phaser: 500 MHz dacclock
|
2016-10-12 14:03:08 +02:00 |
|
|
|
3b1d5d7eb6
|
phaser: verify flags in dac_setup
|
2016-10-12 12:19:08 +02:00 |
|
|
|
1117fe191b
|
phaser: support core stpl
|
2016-10-12 12:03:29 +02:00 |
|
|
|
f515c11f26
|
phaser: fix refclk period spec
|
2016-10-11 20:13:34 +02:00 |
|
|
|
bae5b73155
|
phaser: comment out stpl test
|
2016-10-11 19:50:19 +02:00 |
|
|
|
2b1cca2e7e
|
phaser: stpl
|
2016-10-11 19:29:27 +02:00 |
|
|
|
e4d1f6cf1f
|
README_PHASER: update
|
2016-10-10 18:49:24 +02:00 |
|
|
|
18d18b6685
|
phaser: add sync ttl input for monitoring
|
2016-10-10 17:13:23 +02:00 |
|
|
|
f5f7acc1f8
|
ttl_simple: add pure Input
(no Tristate for internal signals)
|
2016-10-10 17:13:23 +02:00 |
|
|
|
e27228fdd5
|
ad9516: duty cycle correction
|
2016-10-10 17:13:23 +02:00 |
|
Florent Kermarrec
|
c08caae171
|
phaser: use qpll
|
2016-10-10 17:05:42 +02:00 |
|
|
|
5f7229ef92
|
ad9154: tweak jesd prbs test
|
2016-10-09 20:34:15 +02:00 |
|
|
|
1f93658724
|
phaser/dac_setup: clear sticky bits, use syncmode=9
|
2016-10-07 18:54:21 +02:00 |
|
|
|
89a30b6f7c
|
phaser: error on startup kernel
|
2016-10-08 00:02:38 +08:00 |
|
|
|
4e60a6ac71
|
phaser: tweak sawg example
|
2016-10-08 00:02:24 +08:00 |
|
|
|
1157a3a54b
|
ad9514_status: more info
|
2016-10-07 15:42:46 +02:00 |
|
|
|
72932fccec
|
phaser: fix sysref for 250 MHz sample rate
|
2016-10-07 15:40:00 +02:00 |
|
|
|
cfd2fe8627
|
phaser: fix fpga deviceclock divider
|
2016-10-07 13:40:45 +02:00 |
|
|
|
9b860b26e8
|
phaser: fix rtio pll inputs
|
2016-10-07 13:00:42 +02:00 |
|
|
|
c846e758f1
|
phaser: fix startup_kernel/ceil
|
2016-10-07 12:57:38 +02:00 |
|
|
|
09434ec054
|
phaser: also adapt rtio_crg
|
2016-10-07 12:44:22 +02:00 |
|
Florent Kermarrec
|
e998a980b3
|
phaser/startup: use get_configuration_checksum()
|
2016-10-07 09:00:01 +02:00 |
|
Florent Kermarrec
|
b02a7234f6
|
phaser: use 125MHz refclk for jesd
|
2016-10-07 08:59:34 +02:00 |
|
|
|
4390fea437
|
phaser status: add statusmode stuff for serdes pll
|
2016-10-06 17:36:54 +02:00 |
|
|
|
01bc7faacc
|
dac_setup: cleanup, add doc
|
2016-10-06 17:27:50 +02:00 |
|
|
|
fee7831573
|
phaser: split setup
|
2016-10-06 16:48:03 +02:00 |
|
|
|
1193ba4bf4
|
ad9154: merge csr spaces
|
2016-10-06 16:21:15 +02:00 |
|
|
|
4d87f0e9e0
|
phaser: instantiate jesd204b core, wire up
|
2016-10-06 14:44:22 +02:00 |
|
|
|
f62d60093e
|
README_PHASER: update
|
2016-10-06 09:58:05 +02:00 |
|
|
|
d13f67cf63
|
phaser: fix README
|
2016-10-05 19:26:33 +02:00 |
|
|
|
c54b6e2f3c
|
phaser: add README
|
2016-10-05 19:24:34 +02:00 |
|
|
|
4a0eaf0f95
|
phaser: add jesd204b rtio dds
gateware: add jesd204b awg
gateware: copy phaser (df3825a)
dsp/tools: update satadd mixin
phaser: no DDS stubs
dsp: accu fix
phaser: cleanup/reduce
sawg: kernel support and docs
sawg: coredevice api fixes
sawg: example ddb/experiment
phaser: add conda package
examples/phaser: typo
sawg: adapt tests, fix accu stb
sawg: tweak dds parameters
sawg: move/adapt/extend tests
sawg: test phy, refactor
phaser: non-rtio spi
phaser: target cli update
phaser: ad9154-fmc-ebz pins
phaser: reorganize fmc signal naming
phaser: add test mode stubs
phaser: txen is LVTTL
phaser: clk spi xfer test
phaser: spi for ad9154 and ad9516
phaser: spi tweaks
ad9154: add register map from ad9144.xml
ad9516: add register map from ad9517.xml and manual adaptation
ad9154_reg: just generate getter/setter macros as well
ad9154: reg WIP
ad9154: check and fix registers
kc705: single ended rtio_external_clk
use single ended user_sma_clk_n instead of p/n to free up one clock sma
kc705: mirror clk200 at user_sma_clock_p
ad9516_regs.h: fix B_COUNTER_MSB
phase: wire up clocking differently
needs patched misoc
kc705: feed rtio_external_clock directly
kc705: remove rtio_external_clk for phaser
phaser: spi tweaks
ad9516: some startup
ad9516_reg fixes
phaser: setup ad9516 for supposed 500 MHz operation
ad9516: use full duplex spi
ad9154_reg: add CONFIG_REG_2
ad9154_reg: fixes
phaser: write some ad9154 config
ad9154_reg: fixes
ad9154: more init, and human readable setup
ad9154/ad9516: merge spi support
ad9154: status readout
Revert "kc705: remove rtio_external_clk for phaser"
This reverts commit d500288bb44f2bf2eeb0c2f237aa207b0a8b1366.
Revert "kc705: feed rtio_external_clock directly"
This reverts commit 8dc7825519e3e75b7d3d29c9abf10fc6e3a8b4c5.
Revert "phase: wire up clocking differently"
This reverts commit ad9cc450ffa35abb54b0842d56f6cf6c53c6fbcc.
Revert "kc705: mirror clk200 at user_sma_clock_p"
This reverts commit 7f0dffdcdd28e648af84725682f82ec6e5642eba.
Revert "kc705: single ended rtio_external_clk"
This reverts commit a9426d983fbf5c1cb768da8f1da26d9b7335e9cf.
ad9516: 2000 MHz clock
phaser: test clock dist
phaser: test freqs
ad9154: iostandards
phaser: drop clock monitor
phaser: no separate i2c
phaser: drive rtio from refclk, wire up sysref
phaser: ttl channel for sync
ad9154: 4x interp, status, tweaks
phaser: sync/sysref 33V banks
phaser: sync/sysref LVDS_25 inputs are VCCO tolerant
phaser: user input-only ttls
phaser: rtio fully from refclk
ad9154: reg name usage fix
ad9154: check register modifications
Revert "ad9154: check register modifications"
This reverts commit 45121d90edf89f7bd8703503f9f317ad050f9564.
ad9154: fix status code
ad9154: addrinc, recal serdes pll
phaser: coredevice, example tweaks
sawg: missing import
sawg: type fixes
ad9514: move setup functions
ad9154: msb first also decreasing addr
phaser: use sys4x for rtio internal ref
phaser: move init code to main
phaser: naming cleanup
phaser: cleanup pins
phaser: move spi to kernel cpu
phaser: kernel support for ad9154 spi
ad9154: add r/w methods
ad9154: need return annotations
ad9154: r/w methods are kernels
ad9154_reg: portable helpers
phaser: cleanup startup kernel
ad9154: status test
ad9154: prbs test
ad9154: move setup, document
phaser: more documentation
|
2016-10-05 16:17:50 +02:00 |
|
|
|
2bc5dc4ecb
|
i2c: cleanup includes
|
2016-10-05 16:17:50 +02:00 |
|
|
|
a91ed8394c
|
rtio: add input-only channel
|
2016-10-05 16:17:50 +02:00 |
|
|
|
279f0d568d
|
rtio: support differential ttl
|
2016-10-05 16:17:50 +02:00 |
|
|
|
fdadf550fb
|
RELEASE_NOTES: 2.0
|
2016-09-24 18:53:36 +02:00 |
|
|
|
2701b914e2
|
conda: update migen version requirements
|
2016-09-24 21:02:19 +08:00 |
|
|
|
8280e72e90
|
gateware: use new misoc CSR mapping API
|
2016-09-24 20:48:37 +08:00 |
|
whitequark
|
956f64906d
|
Rust: fix incorrect use of lwip API.
|
2016-09-23 05:20:15 +00:00 |
|
whitequark
|
ce05eee80c
|
Rust: style fix.
|
2016-09-23 05:20:04 +00:00 |
|
|
|
fac0c68cd1
|
novatech409b: fix get_status
|
2016-09-23 11:03:50 +08:00 |
|
