2021-11-30 14:17:02 +08:00
\documentclass [10pt] { datasheet}
\usepackage { palatino}
\usepackage { textgreek}
\usepackage { minted}
\usepackage { tcolorbox}
\usepackage { etoolbox}
\usepackage [justification=centering] { caption}
\usepackage [utf8] { inputenc}
\usepackage [english] { babel}
\usepackage [english] { isodate}
\usepackage { graphicx}
\usepackage { subfigure}
\usepackage { tikz}
\usepackage { pgfplots}
\usepackage { circuitikz}
2022-01-10 15:20:16 +08:00
\usepackage { pifont}
2021-11-30 14:17:02 +08:00
\usetikzlibrary { calc}
\usetikzlibrary { fit,backgrounds}
2022-02-04 13:45:25 +08:00
\title { 4410/4412 DDS Urukul}
2021-11-30 14:17:02 +08:00
\author { M-Labs Limited}
2022-01-19 15:34:54 +08:00
\date { January 2022}
\revision { Revision 2}
2021-11-30 14:17:02 +08:00
\companylogo { \includegraphics [height=0.73in] { artiq_ sinara.pdf} }
\begin { document}
\maketitle
\section { Features}
\begin { itemize}
2022-01-18 16:02:01 +08:00
\item { 4-channel 1GS/s DDS.}
2021-11-30 14:17:02 +08:00
\item { Output frequency ranges from \textless 1 to \textgreater 400 MHz.}
\item { Sub-Hz frequency resolution.}
\item { Controlled phase steps.}
\item { Accurate output amplitude control.}
\end { itemize}
\section { Applications}
\begin { itemize}
2022-01-04 13:17:48 +08:00
\item { Dynamic low-noise RF source.}
2021-12-24 16:33:20 +08:00
\item { Driving RF electrodes in ion traps.}
\item { Driving acousto-optic modulators.}
2022-01-05 16:19:16 +08:00
\item { Form a laser intensity servo with 5108 Sampler.}
2021-11-30 14:17:02 +08:00
\end { itemize}
\section { General Description}
2022-02-04 13:45:25 +08:00
The 4410/4412 DDS Urukul card is a 4hp EEM module part of the ARTIQ Sinara family.
2021-11-30 14:17:02 +08:00
It adds frequency generation capabilities to carrier cards such as 1124 Kasli and 1125 Kasli-SoC.
It provides 4 channels of DDS at 1GS/s.
Output frequency from \textless 1 to \textgreater 400 MHz are supported.
The nominal maximum output power of each channel is 10dBm.
Each channel can be attenuated from 0 to -31.5 dB by a digital attenuator.
RF switches (1ns temporal resolution) on each channel provides 70 dB isolation.
2022-02-04 13:45:25 +08:00
4410 DDS Urukul comes with AD9910 chips, while 4412 DDS Urukul comes with AD9912 chips instead.
2021-11-30 14:17:02 +08:00
% Switch to next column
\vfill \break
\newcommand * { \MyLabel } [3][2cm]{ \parbox { #1} { \centering #2 \\ #3} }
\newcommand * { \MymyLabel } [3][4cm]{ \parbox { #1} { \centering #2 \\ #3} }
2022-01-18 12:10:11 +08:00
\newcommand { \repeatfootnote } [1]{ \textsuperscript { \ref { #1} } }
2022-01-20 16:43:41 +08:00
\newcommand { \inputcolorboxminted } [2]{ %
\begin { tcolorbox} [colback=white]
\inputminted [#1, gobble=4] { python} { #2}
\end { tcolorbox}
}
2021-11-30 14:17:02 +08:00
\begin { figure} [h]
\centering
\scalebox { 0.88} {
\begin { circuitikz} [european, scale=0.95, every label/.append style={ align=center} ]
\begin { scope} []
% Node to pin-point the locations of SMA symbols
\draw [color=white, text=black] (-0.1, 0) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (ext_ clk) { } ;
\draw [color=white, text=black] (-0.1, -0.35) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (mmcx) { } ;
\draw [color=white, text=black] (-0.1, -1.75) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (rf0) { } ;
\draw [color=white, text=black] (-0.1, -2.45) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (rf1) { } ;
\draw [color=white, text=black] (-0.1, -3.15) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (rf2) { } ;
\draw [color=white, text=black] (-0.1, -3.85) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (rf3) { } ;
% Labels for female EXT_CLK, MMCX, RF {0, 1, 2, 3}
\node [label=left:\tiny { EXT CLK} ] at (0.35, 0) { } ;
\node [label=left:\tiny { MMCX} ] at (0.35, -0.35) { } ;
\node [label=left:\tiny { RF 0} ] at (0.35, -1.75) { } ;
\node [label=left:\tiny { RF 1} ] at (0.35, -2.45) { } ;
\node [label=left:\tiny { RF 2} ] at (0.35, -3.15) { } ;
\node [label=left:\tiny { RF 3} ] at (0.35, -3.85) { } ;
% draw female EXT_CLK, MMCX, RF {0, 1, 2, 3}
\begin { scope} [scale=0.07 , rotate=-90, xshift=0cm, yshift=2cm]
\draw (0,0.65) -- (0,3);
\clip (-1.5,0) rectangle (1.5,1.5);
\draw (0,0) circle(1.5);
\clip (-0.8,0) rectangle (0.8,0.8);
\draw (0,0) circle(0.8);
\end { scope}
\begin { scope} [scale=0.07 , rotate=-90, xshift=5cm, yshift=2cm]
\draw (0,0.65) -- (0,3);
\clip (-1.5,0) rectangle (1.5,1.5);
\draw (0,0) circle(1.5);
\clip (-0.8,0) rectangle (0.8,0.8);
\draw (0,0) circle(0.8);
\end { scope}
\begin { scope} [scale=0.07 , rotate=-90, xshift=25cm, yshift=2cm]
\draw (0,0.65) -- (0,3);
\clip (-1.5,0) rectangle (1.5,1.5);
\draw (0,0) circle(1.5);
\clip (-0.8,0) rectangle (0.8,0.8);
\draw (0,0) circle(0.8);
\end { scope}
\begin { scope} [scale=0.07 , rotate=-90, xshift=35cm, yshift=2cm]
\draw (0,0.65) -- (0,3);
\clip (-1.5,0) rectangle (1.5,1.5);
\draw (0,0) circle(1.5);
\clip (-0.8,0) rectangle (0.8,0.8);
\draw (0,0) circle(0.8);
\end { scope}
\begin { scope} [scale=0.07 , rotate=-90, xshift=45cm, yshift=2cm]
\draw (0,0.65) -- (0,3);
\clip (-1.5,0) rectangle (1.5,1.5);
\draw (0,0) circle(1.5);
\clip (-0.8,0) rectangle (0.8,0.8);
\draw (0,0) circle(0.8);
\end { scope}
\begin { scope} [scale=0.07 , rotate=-90, xshift=55cm, yshift=2cm]
\draw (0,0.65) -- (0,3);
\clip (-1.5,0) rectangle (1.5,1.5);
\draw (0,0) circle(1.5);
\clip (-0.8,0) rectangle (0.8,0.8);
\draw (0,0) circle(0.8);
\end { scope}
% Draw the internal oscillator
\draw (0.02, -0.8) node[twoportshape, t={ OSC} , circuitikz/bipoles/twoport/width=0.8, scale=0.4] (xo) { } ;
% Draw the clock buffers as selector
% \tikzset{demux/.style={muxdemux, muxdemux def={Lh=6, Rh=6, NL=3, NT=1, NB=0, NR=1, w=2.5}, no input leads, scale=0.4}};
% \draw (1.55, -0.35) node[demux]{\rotatebox[origin=c]{-90}{CLK BUFFERS}};
\draw (1.45, -0.35) node[twoportshape, t={ CLK Buffers} , circuitikz/bipoles/twoport/width=2.2, scale=0.4, rotate=-90] (clk_ buf) { } ;
% Connect CLK_IN to DDS clock buffers
\draw [-latexslim] (ext_ clk.east) -- ++(1,0);
\draw [-latexslim] (mmcx.east) -- ++(1,0);
\draw [-latexslim] (xo.east) -- ++(1,0);
% Connect CPLD clk_sel to DDS clock buffers
\draw [-latexslim] (clk_ buf.east) -- ++(0,-0.42);
% Signal path: From control signals / clock of DDS to output of the RF switches
2021-12-01 13:03:42 +08:00
\draw (1.35, -1.75) node[twoportshape, t={ DDS Signal Path} , circuitikz/bipoles/twoport/width=2, scale=0.4] (sig0) { } ;
\draw (1.35, -2.45) node[twoportshape, t={ DDS Signal Path} , circuitikz/bipoles/twoport/width=2, scale=0.4] (sig1) { } ;
\draw (1.35, -3.15) node[twoportshape, t={ DDS Signal Path} , circuitikz/bipoles/twoport/width=2, scale=0.4] (sig2) { } ;
\draw (1.35, -3.85) node[twoportshape, t={ DDS Signal Path} , circuitikz/bipoles/twoport/width=2, scale=0.4] (sig3) { } ;
2021-11-30 14:17:02 +08:00
% Extra node to expand the dotted area eastward
2021-12-01 13:03:42 +08:00
\draw [color=white, text=black] (2.1, -3.85) node[twoportshape, circuitikz/bipoles/twoport/width=0.4, scale=0.4 ] (sig3_ east) { } ;
2021-11-30 14:17:02 +08:00
% Connect RF to DDS block
2021-12-01 13:03:42 +08:00
\draw [latexslim-] (rf0.east) -- (sig0.west);
\draw [latexslim-] (rf1.east) -- (sig1.west);
\draw [latexslim-] (rf2.east) -- (sig2.west);
\draw [latexslim-] (rf3.east) -- (sig3.west);
2021-11-30 14:17:02 +08:00
% DDS signal path dotted area
\node [draw, dotted, thick, rounded corners, inner xsep=0.7em, inner ysep=0.4em, fit=(rf3)(sig0)(sig3_east.east)] (abs_ dds) { } ;
\node [fill=white, rotate=-90, scale=0.7] at (abs_ dds.west) { DDS Channels} ;
% CPLD
\draw (3.8, -0.35) node[twoportshape, t={ CPLD} , circuitikz/bipoles/twoport/width=1.1, scale=0.8, rotate=-90] (cpld) { } ;
% Synthronization clock buffer for DDS block
2021-12-01 13:03:42 +08:00
\draw (3.5, -2.5) node[twoportshape, t=\MymyLabel { Sync} { Buffer} , circuitikz/bipoles/twoport/width=1.2, scale=0.5] (sync_ buf) { } ;
2021-11-30 14:17:02 +08:00
% Connect CPLD to:
% DDS clock buffer
\draw [latexslim-] (clk_ buf.north) -- (cpld.south);
% DDS signal path
\draw [latexslim-latexslim] (3.4, -0.7) -- ++ (-1.5, 0) -- ++ (0,-0.72);
% Draw to intersection point, then complete the connection to sync buffer
\draw [-] (4.2, -0.7) -- (4.55, -0.7) -- (4.55, -2.5);
\draw [-latexslim] (4.55, -2.5) -- (sync_ buf.east);
% Connect sync buffer to DDS block
2021-12-01 13:03:42 +08:00
\draw [-latexslim] (sig0.east) -- (3.35, -1.75) -- ++ (0, -0.5);
\draw [-latexslim] (sync_ buf.south) -- ++ (0, -0.3) -- ++ (-1.05, 0);
2021-11-30 14:17:02 +08:00
% LVDS Transceivers
\draw (6, 0) node[twoportshape, t=\MymyLabel { LVDS} { Transceiever} , circuitikz/bipoles/twoport/width=1.8, scale=0.5] (lvds0) { } ;
\draw (6, -0.7) node[twoportshape, t=\MymyLabel { LVDS} { Transceiever} , circuitikz/bipoles/twoport/width=1.8, scale=0.5] (lvds1) { } ;
\draw (6, -2.5) node[twoportshape, t=\MymyLabel { LVDS} { Transceiever} , circuitikz/bipoles/twoport/width=1.8, scale=0.5] (lvds2) { } ;
\draw (6, -3.2) node[twoportshape, t=\MymyLabel { LVDS} { Transceiever} , circuitikz/bipoles/twoport/width=1.8, scale=0.5] (lvds3) { } ;
% Connect CPLD to transceivers
\draw [latexslim-latexslim] (lvds0.west) -- ++ (-1.13, 0);
\draw [latexslim-latexslim] (lvds1.west) -- ++ (-0.35, 0) -- ++ (0, 0.6) -- ++ (-0.78, 0);
\draw [latexslim-latexslim] (lvds2.west) -- ++ (-0.45, 0) -- ++ (0, 2.3) -- ++ (-0.68, 0);
\draw [latexslim-latexslim] (lvds3.west) -- ++ (-0.55, 0) -- ++ (0, 2.9) -- ++ (-0.58, 0);
% EEPROMs
\draw (6, -1.4) node[twoportshape, t={ EEPROM} , circuitikz/bipoles/twoport/width=1.8, scale=0.5] (eeprom0) { } ;
\draw (6, -3.9) node[twoportshape, t={ EEPROM} , circuitikz/bipoles/twoport/width=1.8, scale=0.5] (eeprom1) { } ;
% Repeaters for DDS0 sync clock & DDS sync output from sync buffer
2021-12-01 13:03:42 +08:00
\draw (3.5, -3.85) node[twoportshape, t={ Repeaters} , circuitikz/bipoles/twoport/width=1.2, scale=0.5] (rep) { } ;
2021-11-30 14:17:02 +08:00
% Connect DDS0 to repeaters
2021-12-01 13:03:42 +08:00
\draw [-latexslim] (sig0.east) -- ++ (0.3, 0) -- ++ (0, -1.55) -- (3.35, -3.3) -- ++ (0, -0.3);
2021-11-30 14:17:02 +08:00
% Connect sync_buf to repeaters
\draw [-latexslim] (sync_ buf.south) -- ++ (0, -0.3) -- ++ (0.15, 0) -- ++ (0, -0.55);
% EEMs
\draw (8, -0.9) node[twoportshape, t={ EEM Port 0} , circuitikz/bipoles/twoport/width=3.2, scale=0.5, rotate=-90] (eem0) { } ;
\draw (8, -3.4) node[twoportshape, t={ EEM Port 1} , circuitikz/bipoles/twoport/width=3.2, scale=0.5, rotate=-90] (eem1) { } ;
% Connect LVDS and EEM
\draw [latexslim-latexslim] (lvds0.east) -- (7.75, 0);
\draw [latexslim-latexslim] (lvds1.east) -- (7.75, -0.7);
\draw [latexslim-latexslim] (lvds2.east) -- (7.75, -2.5);
\draw [latexslim-latexslim] (lvds3.east) -- (7.75, -3.2);
% Connect EEPROM to EEM
\draw [latexslim-latexslim] (eeprom0.east) -- (7.75, -1.4);
\draw [latexslim-latexslim] (eeprom1.east) -- (7.75, -3.9);
% Connect EEM0 to sync_buf
2021-12-01 13:03:42 +08:00
\draw [latexslim-] (3.65, -2.25) -- (3.65, -1.85) -- (7.75, -1.85);
2021-11-30 14:17:02 +08:00
% Connect repeaters output to EEM1
2021-12-01 13:03:42 +08:00
\draw [-latexslim] (rep.south) -- (3.5, -4.35) -- (7.75, -4.35);
% Synchronization ICs encased in another dotted area
\node [draw, dotted, thick, rounded corners, inner xsep=0.7em, inner ysep=0.4em, fit=(rep.south west)(sync_buf.north east)] (sync_ path) { } ;
\node [fill=white, rotate=-90, scale=0.5] at (sync_ path.east) { AD9910 Only} ;
2021-11-30 14:17:02 +08:00
\end { scope}
\end { circuitikz}
}
\caption { Simplified Block Diagram}
\end { figure}
\begin { figure} [h]
\centering
\scalebox { 0.88} {
\begin { circuitikz} [european, scale=0.95, every label/.append style={ align=center} ]
\begin { scope} []
% RF switches {0, 1, 2, 3} for SMA {0, 1, 2, 3}
\draw (1.4, 0) node[twoportshape, t={ RF Switch} , circuitikz/bipoles/twoport/width=1.5, scale=0.6] (sw) { } ;
% Amplifiers {0, 1, 2, 3} for RF switches {0, 1, 2, 3}
\draw (3, 0) node[buffer, circuitikz/bipoles/twoport/width=1.2, scale=-0.5] (amp) { } ;
% Attenuators {0, 1, 2, 3} for amplifiers {0, 1, 2, 3}
\draw (4.6, 0) node[twoportshape, t=\MymyLabel { Digital} { Attenuator} , circuitikz/bipoles/twoport/width=2, scale=0.6, rotate=-90] (att) { } ;
% DDS {0, 1, 2, 3} for attenuators {0, 1, 2, 3}
\draw (6.6, 0) node[twoportshape, t={ DDS} , circuitikz/bipoles/twoport/width=1.2, scale=0.7] (dds) { } ;
% Connect main signal path
\draw [-latexslim] (dds.west) -- (att.north);
\draw [-latexslim] (att.south) -- (amp.west);
\draw [-latexslim] (amp.east) -- (sw.east);
% Connect abstract DDS clock input
\node [label=above:\tiny { CLK Buffers} ] at (8, -0.2) { } ;
\draw [latexslim-] (dds.east) -- (8, 0);
% Insert CPLD signal to relevant components
\node [label=above:\tiny { CPLD} ] at (8, 1.1) { } ;
\draw [-] (1.4, 1.3) -- (8, 1.3);
\draw [-latexslim] (1.4, 1.3) -- (sw.north);
\draw [-latexslim] (4.6, 1.3) -- (att.west);
\draw [-latexslim] (6.6, 1.3) -- (dds.north);
% Connect sync_buf signal to DDS
\draw [latexslim-] (6.9, -1.35) -- (6.9, -0.35);
\draw [-latexslim] (6.3, -1.35) -- (6.3, -0.35);
\node [label=below:\tiny { Sync Buffer /} ] at (6.6, -1.15) { } ;
\node [label=below:\tiny { Repeaters} ] at (6.6, -1.4) { } ;
\node [label={ [rotate=-90]above:\tiny { DDS 0} } ] at (6.8, -0.9) { } ;
\node [label={ [rotate=-90]above:\tiny { Only} } ] at (6.55, -0.9) { } ;
\end { scope}
\end { circuitikz}
}
\caption { Simplified DDS Signal Path}
\end { figure}
2021-12-22 09:53:03 +08:00
\begin { figure} [hbt!]
2021-11-30 14:17:02 +08:00
\centering
2022-01-26 09:57:27 +08:00
\includegraphics [height=2.2in] { Urukul_ FP.jpg}
2022-01-06 17:29:38 +08:00
\includegraphics [height=2.2in] { photo4410.jpg}
2021-11-30 14:17:02 +08:00
\caption { Urukul Card photo}
\end { figure}
% For wide tables, a single column layout is better. It can be switched
% page-by-page.
\onecolumn
\section { Electrical Specifications}
2022-01-18 12:10:11 +08:00
Specifications of parameters are based on the datasheets of the
DDS IC(AD9910\footnote { \label { ad9910} https://www.analog.com/media/en/technical-documentation/data-sheets/AD9910.pdf} ,
AD9912\footnote { \label { ad9912} https://www.analog.com/media/en/technical-documentation/data-sheets/AD9912.pdf} ),
clock buffer IC (Si53312\footnote { \label { clock_ buffer} https://www.skyworksinc.com/-/media/Skyworks/SL/documents/public/data-sheets/Si53312.pdf} ),
digital attenuator IC (HMC542BLP4E\footnote { \label { attenuator} https://www.analog.com/media/en/technical-documentation/data-sheets/hmc542b.pdf} ),
various information from Sinara wiki\footnote { \label { urukul_ wiki} https://github.com/sinara-hw/Urukul/wiki\# details-specification-and-typical-performance-data}
and corresponding test results\footnote { \label { sinara354} https://github.com/sinara-hw/sinara/issues/354\# issuecomment-352859041} .
2021-12-01 12:05:20 +08:00
\begin { table} [h]
2022-01-19 12:39:20 +08:00
\centering
2021-12-01 12:05:20 +08:00
\begin { threeparttable}
2021-12-01 16:13:44 +08:00
\caption { Recommended Operating Conditions}
2022-01-19 12:39:20 +08:00
\begin { tabularx} { 0.9\textwidth } { l | c c c | c | X}
2021-12-01 12:05:20 +08:00
\thickhline
2022-01-19 12:39:20 +08:00
\textbf { Parameter} & \textbf { Min.} & \textbf { Typ.} & \textbf { Max.} &
2021-12-01 12:05:20 +08:00
\textbf { Unit} & \textbf { Conditions} \\
\hline
2022-01-19 12:39:20 +08:00
Clock input & & & & & \\
\hspace { 3mm} Input frequency\repeatfootnote { ad9910} \textsuperscript { ,} \repeatfootnote { ad9912} & 10 & & 1000 & MHz & PLL disabled \\
& 3.2 & & 60 & MHz & AD9910, PLL enabled, no clock division \\
& 12.8 & & 240 & MHz & AD9910, PLL enabled, 4x clock division \\
& 11 & & 200 & MHz & AD9912, PLL enabled, no clock division \\
& 44 & & 800 & MHz & AD9912, PLL enabled, 4x clock division \\
\hspace { 3mm} Nominal input power\repeatfootnote { clock_ buffer} & & 10 & & dBm & \\
2021-12-01 16:13:44 +08:00
\thickhline
\end { tabularx}
\end { threeparttable}
\end { table}
\begin { table} [h]
2022-01-19 12:39:20 +08:00
\centering
2021-12-01 16:13:44 +08:00
\begin { threeparttable}
\caption { RF Output Specifications}
2022-01-19 12:39:20 +08:00
\begin { tabularx} { 0.9\textwidth } { l | c c c | c | X}
2021-12-01 16:13:44 +08:00
\thickhline
2022-01-19 12:39:20 +08:00
\textbf { Parameter} & \textbf { Min.} & \textbf { Typ.} & \textbf { Max.} &
2021-12-01 16:13:44 +08:00
\textbf { Unit} & \textbf { Conditions} \\
\hline
2022-01-19 12:39:20 +08:00
Low frequency power\repeatfootnote { sinara354} & & & -20 & dBm & 100 kHz output \\
& & & 10 & dBm & 1 MHz output \\
2021-12-01 16:13:44 +08:00
\hline
2022-01-19 12:39:20 +08:00
Frequency\repeatfootnote { urukul_ wiki} & 1 & & 400 & MHz & \\
2021-12-01 12:05:20 +08:00
\hline
2022-01-19 12:39:20 +08:00
Digital attenuation\repeatfootnote { attenuator} & -31.5 & & 0 & dB & \\
2021-12-01 12:05:20 +08:00
\hline
2022-01-19 12:39:20 +08:00
Resolution & & & & & \\
\hspace { 3mm} Frequency\repeatfootnote { ad9910} \textsuperscript { ,} \repeatfootnote { urukul_ wiki} & & 0.25 & & Hz & AD9910 \\
& & 8 & & $ \mu $ Hz & AD9912 \\
\hspace { 3mm} Phase offset\repeatfootnote { ad9910} \textsuperscript { ,} \repeatfootnote { ad9912} & & 16 & & bits & AD9910 \\
& & 14 & & bits & AD9912 \\
\hspace { 3mm} Digital amplitude\repeatfootnote { ad9910} & & 14 & & bits & AD9910 \\
\hspace { 3mm} DAC full scale current\repeatfootnote { ad9910} \textsuperscript { ,} \repeatfootnote { ad9912} & & 8 & & bits & AD9910 \\
& & 10 & & bits & AD9912 \\
\hspace { 3mm} Temporal (I/O Update)\repeatfootnote { urukul_ wiki} & & 4 & & ns & \\
\hspace { 3mm} Digital attenuation\repeatfootnote { attenuator} & & 0.5 & & dB & \\
2021-12-01 16:13:44 +08:00
\thickhline
\end { tabularx}
\end { threeparttable}
\end { table}
2021-12-02 10:13:14 +08:00
\newpage
2021-12-22 12:17:23 +08:00
The tabulated performance characteristics are produced using the following setup unless otherwise noted.
2021-12-06 13:03:59 +08:00
\begin { itemize}
\item 100 MHz input clock into SMA, 10 dBm.
\item Input clock divided by 4.
\item PLL with x40 multiplier.
\item Output frequency at 80 MHz or 81 MHz.
\end { itemize}
2021-12-01 16:13:44 +08:00
\begin { table} [h]
\begin { threeparttable}
\caption { Electrical Characteristics}
\begin { tabularx} { \textwidth } { l | c | c c c | c | X}
\thickhline
\textbf { Parameter} & \textbf { Symbol} & \textbf { Min.} & \textbf { Typ.} & \textbf { Max.} &
\textbf { Unit} & \textbf { Conditions} \\
\hline
2022-01-18 12:10:11 +08:00
Digital attenuator glitch duration\repeatfootnote { sinara354} & $ t _ s $ & & 100 & & ns & \\
2021-12-01 12:05:20 +08:00
\hline
2022-01-18 12:10:11 +08:00
RF switch\repeatfootnote { sinara354} & & & & & & \\
2021-12-01 12:05:20 +08:00
\hspace { 3mm} Rise to 90\% & $ t _ { on } $ & & 100 & & ns & \\
2022-01-19 12:29:38 +08:00
\hspace { 3mm} Isolation & & & 70 & & dB & \\
2021-12-01 12:05:20 +08:00
\hspace { 3mm} Turn-on chirp & $ \gamma $ & & & 0.1 & deg/s & Excluding the first $ \mu $ s\\
\hline
2022-01-19 12:29:38 +08:00
Crosstalk\repeatfootnote { sinara354} & & & -84 & & dB & Victim RF switch opened \\
2021-12-02 09:56:47 +08:00
& & & -110 & & dB & Victim RF switch closed \\
2021-12-01 12:05:20 +08:00
\hline
2022-01-19 12:29:38 +08:00
Cross-channel-intermodulation\repeatfootnote { sinara354} & & & -90 & & dB & \\
2021-12-01 12:05:20 +08:00
\hline
2022-01-18 12:10:11 +08:00
Phase noise\repeatfootnote { sinara354} & $ \mathcal { L } ( f ) $ & & -85 & & dBc/Hz & 0.1 Hz \\
2021-12-01 12:05:20 +08:00
& & & -95 & & dBc/Hz & 1 Hz \\
& & & -107 & & dBc/Hz & 10 Hz \\
& & & -116 & & dBc/Hz & 100 Hz \\
& & & -126 & & dBc/Hz & 1 kHz \\
& & & -133 & & dBc/Hz & 10 kHz \\
& & & -135 & & dBc/Hz & 100 kHz \\
& & & -128 & & dBc/Hz & 1 MHz \\
& & & -149 & & dBc/Hz & 10 MHz \\
\hline
2022-01-19 12:29:38 +08:00
Second-order harmonics\repeatfootnote { sinara354} & & & -40 & & dB & 6 dBm output \\
2021-12-06 13:06:24 +08:00
& & & -34 & & dB & 10.5 dBm output \\
\hline
2022-01-19 12:29:38 +08:00
Third-order harmonics\repeatfootnote { sinara354} & & & -54 & & dB & 6 dBm output \\
2021-12-06 13:06:24 +08:00
& & & -28 & & dB & 10.5 dBm output \\
\hline
2022-01-18 12:10:11 +08:00
Power consumption (AD9910)\repeatfootnote { urukul_ wiki} & $ P $ & & 7 & & W & 4x 400 MHz, 10.5 dBm, 52\degree C\\
Power consumption (AD9912)\repeatfootnote { urukul_ wiki} & $ P $ & & 6.5 & & W & 4x 400 MHz, 10.5 dBm, 52\degree C\\
2021-12-01 12:05:20 +08:00
\thickhline
\end { tabularx}
\end { threeparttable}
\end { table}
2021-11-30 14:17:02 +08:00
2021-12-01 16:13:44 +08:00
\newpage
2022-02-04 13:45:25 +08:00
Harmonic content of the DDS signals from 4410 DDS Urukul is tabulated below\footnote { \label { urukul29} https://github.com/sinara-hw/Urukul/issues/29} . An external 125 MHz clock signal were supplied.
2021-12-24 16:34:25 +08:00
\newcommand { \ts } { \textsuperscript }
\newcolumntype { Y} { >{ \centering \arraybackslash } X}
\begin { table} [h]
\begin { threeparttable}
\caption { Harmonic content with 0.0 dB digital attenuation}
\begin { tabularx} { \textwidth } { | c | Y | Y | Y | Y | Y | Y | Y | Y | Y |}
\thickhline
\multirow { 2} { *} { \textbf { Frequency (MHz)} } &
\multicolumn { 9} { c|} { \textbf { Output power (dBm) of the n\ts { th} -order harmonic} } \\
\cline { 2-10} & 1\ts { st} & 2\ts { nd} & 3\ts { rd} & 4\ts { th} & 5\ts { th} & 6\ts { th} &
7\ts { th} & 8\ts { th} & 9\ts { th} \\
\hline
0.1 & -21.14 & -59.03 & -54.93 & -93.07 & -73.38 & -94.07 & -84.78 & -91.77 & -96.61 \\
\hline
0.5 & 4.51 & -15.45 & -11.61 & -25.02 & -24.35 & -51.70 & -35.14 & -34.46 & -37.85 \\
\hline
1 & 7.67 & -16.80 & -12.32 & -18.27 & -29.25 & -30.87 & -34.51 & -39.28 & -39.84 \\
\hline
10 & 10.67 & -12.69 & -13.94 & -26.12 & -27.76 & -36.11 & -55.32 & -43.85 & -42.65 \\
\hline
20 & 10.86 & -24.90 & -13.65 & -22.87 & -28.67 & -47.68 & -35.85 & -35.45 & -38.48 \\
\hline
50 & 10.74 & -14.18 & -15.01 & -27.57 & -29.01 & -38.05 & -51.52 & -44.53 & -42.71 \\
\hline
100 & 9.70 & -33.59 & -16.72 & -34.36 & -26.81 & -40.14 & -41.07 & -43.88 & -56.89 \\
\hline
200 & 8.97 & -22.22 & -16.23 & -24.89 & -30.49 & -37.97 & -37.79 & -38.80 & -40.14 \\
\hline
300 & 8.27 & -19.17 & -19.51 & -29.80 & -34.75 & -38.90 & -51.92 & -53.38 & -57.95 \\
\hline
400 & 7.68 & -17.82 & -21.60 & -33.04 & -37.80 & -50.37 & -57.45 & -59.80 & -64.68 \\
\hline
500 & -1.80 & -41.57 & -51.71 & -72.36 & -89.35 & -91.63 & -93.15 & -84.54 & -107.57 \\
\thickhline
\end { tabularx}
\end { threeparttable}
\end { table}
\begin { table} [hbt!]
\begin { threeparttable}
\caption { Harmonic content with 10.0 dB digital attenuation}
\begin { tabularx} { \textwidth } { | c | Y | Y | Y | Y | Y | Y | Y | Y | Y |}
\thickhline
\multirow { 2} { *} { \textbf { Frequency (MHz)} } &
\multicolumn { 9} { c|} { \textbf { Output power (dBm) of the n\ts { th} -order harmonic} } \\
\cline { 2-10} & 1\ts { st} & 2\ts { nd} & 3\ts { rd} & 4\ts { th} & 5\ts { th} & 6\ts { th} &
7\ts { th} & 8\ts { th} & 9\ts { th} \\
\hline
0.1 & -27.06 & -81.35 & -62.09 & -97.37 & -84.11 & -103.78 & -91.37 & -100.48 & -104.22 \\
\hline
0.5 & -3.2 & -37.82 & -52.21 & -66.76 & -77.86 & -85.92 & -86.37 & -97.59 & -120.76 \\
\hline
1 & -0.43 & -34.47 & -47.80 & -75.28 & -86.45 & -101.91 & -93.22 & -96.14 & -106.71 \\
\hline
10 & 1.95 & -31.04 & -28.23 & -51.76 & -57.29 & -76.26 & -78.15 & -83.85 & -80.20 \\
\hline
20 & 2.10 & -33.05 & -28.30 & -54.50 & -52.31 & -72.39 & -70.96 & -82.98 & -82.58 \\
\hline
50 & 1.89 & -33.24 & -28.50 & -52.67 & -48.35 & -74.77 & -77.26 & -79.33 & -73.58 \\
\hline
100 & 0.80 & -38.51 & -63.22 & -61.73 & -71.97 & -97.45 & -97.67 & -107.40 & -93.03 \\
\hline
200 & 0.05 & -38.25 & -42.16 & -63.01 & -84.55 & -82.66 & -108.85 & -116.62 & -99.45 \\
\hline
300 & -0.51 & -35.91 & -48.83 & -82.43 & -100.53 & -111.79 & -118.62 & -120.05 & -97.72 \\
\hline
400 & -1.20 & -38.37 & -49.77 & -89.45 & -74.66 & -108.12 & -116.75 & -114.08 & -102.29 \\
\hline
500 & -11.20 & -61.47 & -77.59 & -74.73 & -100.23 & -93.12 & -99.83 & -86.71 & -112.63 \\
\thickhline
\end { tabularx}
\end { threeparttable}
\end { table}
\newpage
\begin { table} [h]
\begin { threeparttable}
\caption { Harmonic content with 20.0 dB digital attenuation}
\begin { tabularx} { \textwidth } { | c | Y | Y | Y | Y | Y | Y | Y | Y | Y |}
\thickhline
\multirow { 2} { *} { \textbf { Frequency (MHz)} } &
\multicolumn { 9} { c|} { \textbf { Output power (dBm) of the n\ts { th} -order harmonic} } \\
\cline { 2-10} & 1\ts { st} & 2\ts { nd} & 3\ts { rd} & 4\ts { th} & 5\ts { th} & 6\ts { th} &
7\ts { th} & 8\ts { th} & 9\ts { th} \\
\hline
0.1 & -31.06 & -82.29 & -68.34 & -109.04 & -92.48 & -111.23 & -99.94 & -109.85 & -112.36 \\
\hline
0.5 & -11.99 & -56.69 & -71.73 & -95.76 & -101.86 & -114.37 & -102.81 & -106.94 & -116.72 \\
\hline
1 & -9.94 & -54.54 & -56.49 & -89.12 & -105.94 & -110.93 & -102.79 & -107.01 & -117.29 \\
\hline
10 & -7.89 & -50.19 & -57.35 & -91.36 & -97.88 & -107.95 & -103.53 & -96.04 & -108.26 \\
\hline
20 & -7.79 & -52.72 & -58.03 & -90.75 & -99.82 & -102.07 & -101.55 & -104.73 & -103.31 \\
\hline
50 & -7.96 & -52.36 & -59.26 & -84.44 & -87.55 & -86.88 & -97.76 & -92.61 & -83.19 \\
\hline
100 & -9.04 & -57.40 & -61.76 & -78.50 & -91.80 & -117.64 & -107.40 & -112.64 & -102.07 \\
\hline
200 & -9.73 & -57.39 & -72.31 & -72.66 & -93.26 & -95.95 & -125.22 & -122.35 & -130.24 \\
\hline
300 & -10.27 & -58.65 & -74.60 & -109.24 & -107.74 & -115.75 & -125.36 & -124.54 & -98.86 \\
\hline
400 & -10.94 & -59.62 & -79.36 & -98.48 & -74.72 & -111.95 & -119.18 & -114.63 & -104.34 \\
\hline
500 & -21.00 & -78.52 & -99.07 & -74.91 & -99.55 & -92.91 & -103.02 & -87.33 & -114.87 \\
\thickhline
\end { tabularx}
\end { threeparttable}
\end { table}
\begin { table} [hbt!]
\begin { threeparttable}
\caption { Harmonic content with 31.5 dB digital attenuation}
\begin { tabularx} { \textwidth } { | c | Y | Y | Y | Y | Y | Y | Y | Y | Y |}
\thickhline
\multirow { 2} { *} { \textbf { Frequency (MHz)} } &
\multicolumn { 9} { c|} { \textbf { Output power (dBm) of the n\ts { th} -order harmonic} } \\
\cline { 2-10} & 1\ts { st} & 2\ts { nd} & 3\ts { rd} & 4\ts { th} & 5\ts { th} & 6\ts { th} &
7\ts { th} & 8\ts { th} & 9\ts { th} \\
\hline
0.1 & -37.89 & -85.04 & -77.41 & -122.04 & -114.29 & -115.58 & -110.65 & -120.06 & -123.70 \\
\hline
0.5 & -22.38 & -71.24 & -89.84 & -107.81 & -108.76 & -127.83 & -114.12 & -118.34 & -127.07 \\
\hline
1 & -21.01 & -72.10 & -90.08 & -111.97 & -111.30 & -127.43 & -114.38 & -118.07 & -128.06 \\
\hline
10 & -19.22 & -72.13 & -90.74 & -110.14 & -105.28 & -114.04 & -113.51 & -94.85 & -116.15 \\
\hline
20 & -19.28 & -75.95 & -94.72 & -91.71 & -107.55 & -112.85 & -112.24 & -116.33 & -114.02 \\
\hline
50 & -19.27 & -74.93 & -92.21 & -95.77 & -101.06 & -97.92 & -108.30 & -103.60 & -93.96 \\
\hline
100 & -20.27 & -79.05 & -87.48 & -89.73 & -104.00 & -117.98 & -112.12 & -110.51 & -105.80 \\
\hline
200 & -21.19 & -78.33 & -106.81 & -82.70 & -92.31 & -109.93 & -133.86 & -120.94 & -102.95 \\
\hline
300 & -21.58 & -80.96 & -112.44 & -110.40 & -108.11 & -115.68 & -122.51 & -125.25 & -99.63 \\
\hline
400 & -22.44 & -82.73 & -105.55 & -98.03 & -74.84 & -113.93 & -119.41 & -114.93 & -104.55 \\
\hline
500 & -31.73 & -93.37 & -99.74 & -75.03 & -99.27 & -92.84 & -104.14 & -87.46 & -116.22 \\
\thickhline
\end { tabularx}
\end { threeparttable}
\end { table}
\newpage
2021-12-24 16:36:58 +08:00
2022-06-23 16:58:16 +08:00
The RMS voltage of a 4410 DDS Urukul channel at different amplitude scale factor is measured.
The DDS channel is directly connected to an oscilloscope with a 50\textOmega ~termination.
The reported values are obtained from the oscilloscope.
\begin { multicols} { 2}
\begin { figure} [H]
\begin { tikzpicture}
\begin { axis} [
% title={RMS Voltage with 50\textOmega~termination \& 0dB attenuation},
xlabel={ AD9910 Amplitude Scale Factor} ,
ylabel={ DDS RMS Voltage ($ V _ { rms } $ )} ,
xmin=0, xmax=1,
ymin=0, ymax=1,
xtick={ 0, 0.2, 0.4, 0.6, 0.8, 1} ,
ytick={ 0, 0.2, 0.4, 0.6, 0.8, 1} ,
legend pos=north west,
ymajorgrids=true,
grid style=dashed,
]
\addplot [
color=black,
mark=square,
samples=11
] coordinates {
(0.0, 0) (0.1, 0.087924) (0.2, 0.176157) (0.3, 0.262437) (0.4, 0.345833) (0.5, 0.429203)
(0.6, 0.512235) (0.7, 0.59130) (0.8, 0.66877) (0.9, 0.73344) (1.0, 0.78761)
} ;
\addplot [
color=blue,
mark=square,
samples=11
] coordinates {
(0.0, 0) (0.1, 0.089807) (0.2, 0.179723) (0.3, 0.268852) (0.4, 0.354310) (0.5, 0.441055)
(0.6, 0.526386) (0.7, 0.61233) (0.8, 0.69044) (0.9, 0.75856) (1.0, 0.81703)
} ;
\addplot [
color=green,
mark=square,
samples=11
] coordinates {
(0.0, 0) (0.1, 0.093101) (0.2, 0.186762) (0.3, 0.277704) (0.4, 0.369172) (0.5, 0.459391)
(0.6, 0.548191) (0.7, 0.63607) (0.8, 0.71469) (0.9, 0.78221) (1.0, 0.84139)
} ;
\addplot [
color=red,
mark=square,
samples=11
] coordinates {
(0, 0) (0.1, 0.092502) (0.2, 0.184728) (0.3, 0.276224) (0.4, 0.366914) (0.5, 0.457255)
(0.6, 0.544924) (0.7, 0.62991) (0.8, 0.70582) (0.9, 0.77104) (1.0, 0.82737)
} ;
\legend { 200 MHz, 100 MHz, 50 MHz, 10 MHz}
\end { axis}
\end { tikzpicture}
\caption { RMS voltage, 0dB attenuation}
\end { figure}
\begin { figure} [H]
\begin { tikzpicture}
\begin { axis} [
% title={RMS Voltage with 50\textOmega~termination \& 15dB attenuation},
xlabel={ AD9910 Amplitude Scale Factor} ,
ylabel={ DDS RMS Voltage ($ mV _ { rms } $ )} ,
xmin=0, xmax=1,
ymin=0, ymax=200,
xtick={ 0, 0.2, 0.4, 0.6, 0.8, 1} ,
ytick={ 0, 40, 80, 120, 160, 200} ,
legend pos=north west,
ymajorgrids=true,
grid style=dashed,
]
\addplot [
color=black,
mark=square,
samples=11
] coordinates {
(0, 0) (0.1, 16.1805) (0.2, 32.1530) (0.3, 48.2039) (0.4, 64.172) (0.5, 80.452)
(0.6, 96.405) (0.7, 112.427) (0.8, 128.776) (0.9, 144.967) (1.0, 161.148)
} ;
\addplot [
color=blue,
mark=square,
samples=11
] coordinates {
(0, 0) (0.1, 16.6691) (0.2, 33.3762) (0.3, 49.8844) (0.4, 67.055) (0.5, 83.652)
(0.6, 99.970) (0.7, 116.906) (0.8, 133.368) (0.9, 150.839) (1.0, 167.033)
} ;
\addplot [
color=green,
mark=square,
samples=11
] coordinates {
(0, 0) (0.1, 17.0562) (0.2, 34.0713) (0.3, 51.0456) (0.4, 68.241) (0.5, 85.241)
(0.6, 102.328) (0.7, 119.279) (0.8, 136.584) (0.9, 153.737) (1.0, 170.829)
} ;
\addplot [
color=red,
mark=square,
samples=11
] coordinates {
(0, 0) (0.1, 16.8030) (0.2, 33.6407) (0.3, 50.4039) (0.4, 67.348) (0.5, 84.127)
(0.6, 100.852) (0.7, 117.618) (0.8, 134.415) (0.9, 151.267) (1.0, 168.160)
} ;
\legend { 200 MHz, 100 MHz, 50 MHz, 10 MHz}
\end { axis}
\end { tikzpicture}
\caption { RMS voltage, 15dB attenuation}
\end { figure}
\columnbreak
\begin { figure} [H]
\begin { tikzpicture}
\begin { axis} [
% title={RMS Voltage with 50\textOmega~termination \& 0dB attenuation},
xlabel={ AD9910 Amplitude Scale Factor} ,
ylabel={ DDS RMS Voltage ($ V _ { rms } $ )} ,
xmin=0, xmax=1,
ymin=0, ymax=1,
xtick={ 0, 0.2, 0.4, 0.6, 0.8, 1} ,
ytick={ 0, 0.2, 0.4, 0.6, 0.8, 1} ,
legend pos=north west,
ymajorgrids=true,
grid style=dashed,
]
\addplot [
color=blue,
mark=square,
samples=11
] coordinates {
(0.0, 0) (0.1, 0.089807) (0.2, 0.179723) (0.3, 0.268852) (0.4, 0.354310) (0.5, 0.441055)
(0.6, 0.526386) (0.7, 0.61233) (0.8, 0.69044) (0.9, 0.75856) (1.0, 0.81703)
} ;
\addplot [
color=blue,
samples=2,
very thick,
dotted
] { 0.089807*10*x} ;
\legend { Measured, Linear Model}
\end { axis}
\end { tikzpicture}
\caption { RMS voltage at 100 MHz, 0dB attenuation}
\end { figure}
\begin { figure} [H]
\begin { tikzpicture}
\begin { axis} [
% title={RMS Voltage with 50\textOmega~termination \& 15dB attenuation},
xlabel={ AD9910 Amplitude Scale Factor} ,
ylabel={ DDS RMS Voltage ($ mV _ { rms } $ )} ,
xmin=0, xmax=1,
ymin=0, ymax=200,
xtick={ 0, 0.2, 0.4, 0.6, 0.8, 1} ,
ytick={ 0, 40, 80, 120, 160, 200} ,
legend pos=north west,
ymajorgrids=true,
grid style=dashed,
]
\addplot [
color=blue,
mark=square,
samples=11
] coordinates {
(0, 0) (0.1, 16.6691) (0.2, 33.3762) (0.3, 49.8844) (0.4, 67.055) (0.5, 83.652)
(0.6, 99.970) (0.7, 116.906) (0.8, 133.368) (0.9, 150.839) (1.0, 167.033)
} ;
\addplot [
color=blue,
samples=2,
very thick,
dotted
] { 16.6691*10*x} ;
\legend { Measured, Linear Model}
\end { axis}
\end { tikzpicture}
\caption { RMS voltage at 100 MHz, 15dB attenuation}
\end { figure}
\end { multicols}
\newpage
2021-12-24 16:36:58 +08:00
\begin { multicols} { 2}
\begin { figure} [H]
\includegraphics [width=3.3in] { urukul_ xo_ phase_ noise.jpg}
\caption { Phase noise of Urukul clocked by\\ internal oscillator}
\end { figure}
\begin { figure} [H]
\includegraphics [width=3.3in] { urukul_ clock_ phase_ noise.jpg}
\caption { Phase noise of 200 MHz DDS Output}
\end { figure}
\begin { figure} [H]
\includegraphics [width=3.3in] { urukul_ harmonics.png}
2022-01-18 12:10:11 +08:00
\caption [] { Harmonic content of 200 MHz DDS Output\footnotemark }
2021-12-24 16:36:58 +08:00
\end { figure}
\begin { figure} [H]
\includegraphics [width=3.3in] { urukul_ 6dbm_ harmonics.png}
2022-01-18 12:10:11 +08:00
\caption { Harmonic content of 80 MHz DDS Output (6 dBm)\repeatfootnote { sinara354} }
2021-12-24 16:36:58 +08:00
\end { figure}
\begin { figure} [H]
\includegraphics [width=3.3in] { urukul_ 10dbm_ harmonics.png}
2022-01-18 12:10:11 +08:00
\caption { Harmonic content of 80 MHz DDS Output (10 dBm)\repeatfootnote { sinara354} }
2021-12-24 16:36:58 +08:00
\end { figure}
\begin { figure} [H]
\includegraphics [width=3.3in] { rf_ transient.jpg}
2022-01-18 12:10:11 +08:00
\caption { RF switch turn on transient\repeatfootnote { sinara354} }
2021-12-24 16:36:58 +08:00
\end { figure}
\begin { figure} [H]
\includegraphics [width=3.3in] { nyquist_ rejection_ 400mhz.png}
2022-01-18 12:10:11 +08:00
\caption { Nyquist rejection 400 MHz to 600 MHz\repeatfootnote { sinara354} }
2021-12-24 16:36:58 +08:00
\end { figure}
2022-01-10 15:20:16 +08:00
\end { multicols}
2022-01-18 12:10:11 +08:00
\footnotetext { \label { urukul64} https://github.com/sinara-hw/Urukul/issues/64}
2021-12-24 16:36:58 +08:00
\begin { figure} [H]
2021-12-22 12:17:23 +08:00
\centering
2021-12-24 16:36:58 +08:00
\includegraphics [width=3.3in] { nyquist_ rejection_ 450mhz.png}
2022-01-18 12:10:11 +08:00
\caption { Nyquist rejection 450 MHz to 550 MHz\repeatfootnote { sinara354} }
2021-12-22 12:17:23 +08:00
\end { figure}
2021-12-24 16:36:58 +08:00
\begin { figure} [H]
2021-12-22 12:17:23 +08:00
\centering
2021-12-24 16:36:58 +08:00
\includegraphics [width=3.3in] { att_ glitch_ bitflip.png}
2022-01-18 12:10:11 +08:00
\caption { Attenuator step from 20 to 60 digital\\ (16+4dB switch glitch)\repeatfootnote { sinara354} }
2021-12-22 12:17:23 +08:00
\end { figure}
2021-12-24 16:36:58 +08:00
\begin { figure} [H]
2021-12-22 12:17:23 +08:00
\centering
2021-12-24 16:36:58 +08:00
\includegraphics [width=3.3in] { att_ glitch_ carry.png}
2022-01-18 12:10:11 +08:00
\caption { Attenuator step from 31 to 32 digital\\ (major carry glitch)\repeatfootnote { sinara354} }
2021-12-22 12:17:23 +08:00
\end { figure}
2022-01-10 15:20:16 +08:00
\newpage
2022-01-07 17:25:24 +08:00
\section { Front Panel Drawings}
2022-01-21 13:31:36 +08:00
\begin { multicols} { 2}
\begin { center}
2022-01-07 17:25:24 +08:00
\centering
2022-01-25 14:57:45 +08:00
\includegraphics [height=3in] { dds_ drawings.pdf}
2022-01-21 13:50:32 +08:00
\captionof { figure} { 4410 DDS Urukul front panel drawings}
2022-01-21 13:31:36 +08:00
\end { center}
\begin { center}
\captionof { table} { Bill of Material (Standalone)}
\tiny
\begin { tabular} { |c|c|c|c|}
\hline
Index & Part No. & Qty & Description \\ \hline
1 & 90498177 & 1 & FRONT PANEL 3U 4HP PIU TYPE2 \\ \hline
2 & 3020716 & 0.02 & SLEEVE GREY PLAS.M2.5 (100PCS) \\ \hline
3 & 3218843 & 2 & FP-ALIGNMENT PIN (LOCALIZATION) \\ \hline
\end { tabular}
\end { center}
\columnbreak
\begin { center}
\centering
2022-01-25 14:57:45 +08:00
\includegraphics [height=3in] { dds_ assembly.pdf}
2022-01-21 13:50:32 +08:00
\captionof { figure} { 4410 DDS Urukul front panel assembly}
2022-01-21 13:31:36 +08:00
\end { center}
\begin { center}
\captionof { table} { Bill of Material (Assembled)}
\tiny
\begin { tabular} { |c|c|c|c|}
\hline
Index & Part No. & Qty & Description \\ \hline
1 & 90498177 & 1 & FP-LYKJ 3U4HP PANEL \\ \hline
2 & 3001012 & 2 & SCR M2.5*6 PAN PHL NI DIN7985 \\ \hline
3 & 3010110 & 0.02 & WASHER PLN.M2.7 DIN125 (100X) \\ \hline
4 & 3010124 & 0.1 & EMC GASKET FABRIC 3U (10PCS) \\ \hline
5 & 3033098 & 0.02 & SCREW COLLAR M2.5X12.3 (100X) \\ \hline
6 & 3040012 & 1 & HANDLE 4HP GREY PLASTIC \\ \hline
7 & 3040138 & 2 & PB HOLDER DIE-CAST \\ \hline
8 & 3201099 & 0.01 & SCR M2.5*8 OVL PHL ST NI 100EA \\ \hline
9 & 3207075 & 0.01 & SCR M2.5*12 PAN 100 21101-221 \\ \hline
\end { tabular}
\end { center}
\end { multicols}
2022-01-07 17:25:24 +08:00
2022-06-07 12:46:23 +08:00
\newpage
2022-01-10 15:20:16 +08:00
\section { Urukul Mode Configurations}
Mode of operation is specified by a DIP switch.
The DIP switch can be found at the top right corner of the card.
The following table summarizes the required setting for each mode.
\ding { 51} indicates ON, while \ding { 53} indicates OFF.
\begin { multicols} { 2}
\begin { center}
\captionof { table} { DIP switch configurations}
\begin { tabular} { |l|cccc|}
\hline
\multicolumn { 1} { |c|} { \multirow { 2} { *} { Mode} } & \multicolumn { 4} { c|} { DIP Switch} \\ \cline { 2-5}
\multicolumn { 1} { |c|} { } & \multicolumn { 1} { c|} { 1} & \multicolumn { 1} { c|} { 2} & \multicolumn { 1} { c|} { 3} & 4 \\ \hline
Default & \multicolumn { 1} { c|} { \ding { 53} } & \multicolumn { 1} { c|} { \ding { 53} } & \multicolumn { 1} { c|} { \ding { 53} } & \ding { 53} \\ \hline
SU-Servo & \multicolumn { 1} { c|} { \ding { 53} } & \multicolumn { 1} { c|} { \ding { 51} } & \multicolumn { 1} { c|} { \ding { 53} } & \ding { 53} \\ \hline
\end { tabular}
\end { center}
\columnbreak
\begin { center}
\centering
\includegraphics [height=1.5in] { urukul_ dip_ switch.jpg}
2022-01-11 14:54:26 +08:00
\captionof { figure} { Position of DIP switch}
2022-01-10 15:20:16 +08:00
\end { center}
\end { multicols}
2022-06-07 12:46:23 +08:00
\section { Urukul 1-EEM/2-EEM Modes}
4410/4412 DDS Urukul can operate with either 1 or 2 EEM connections.
It is in 1-EEM mode when only EEM0 is connected, 2-EEM mode when both EEM0 \& EEM1 are connected.
2-EEM mode provides these additional features in comparison to 1-EEM mode.
\begin { itemize}
\item 1 ns temporal resolution RF switches \\
Without EEM1, the only way to access the switches is through the CPLD using SPI. \\
With EEM1, RF switches can be controlled as a TTL output through the LVDS transceiver.
1 ns temporal resolution is achieved using the ARTIQ RTIO system.
\item SU-Servo (4410 DDS Urukul feature) \\
SU-Servo requires both EEM0 \& EEM1 to control multiple DDS channels simultaneously using the QSPI interface.
\end { itemize}
2021-12-22 12:17:23 +08:00
\newpage
2021-11-30 14:17:02 +08:00
\section { Example ARTIQ code}
2022-02-04 13:45:25 +08:00
The sections below demonstrate simple usage scenarios of the 4410/4412 DDS Urukul card with the ARTIQ control system.
2021-11-30 14:17:02 +08:00
They do not exhaustively demonstrate all the features of the ARTIQ system.
The full documentation for the ARTIQ software and gateware is available at \url { https://m-labs.hk} .
\subsection { 10 MHz Sinusoidal Wave}
2021-12-06 11:53:45 +08:00
Generate a 10MHz sinusoid from RF0 with full scale amplitude, attenuated by 6 dB.
2021-11-30 14:17:02 +08:00
Both the CPLD and the DDS channels should be initialized.
2021-12-07 16:29:35 +08:00
By default, AD9910 single-tone profiles are programmed to profile 7.
2021-11-30 14:17:02 +08:00
2022-01-20 16:43:41 +08:00
\inputcolorboxminted { firstline=11,lastline=18} { examples/dds.py}
2021-11-30 14:17:02 +08:00
If the synchronization feature of AD9910 was enabled, RF signal across different channels of the same Urukul can be synchronized.
2021-12-07 16:20:14 +08:00
For example, phase-coherent RF signal can be produced on both channel 0 and channel 1 after configuring an appropriate phase mode.
2022-01-20 16:43:41 +08:00
\inputcolorboxminted { firstline=28,lastline=43} { examples/dds.py}
2021-12-07 16:20:14 +08:00
Note that the phase difference between the 2 channels might not be exactly 0.25 turns, but it is a constant.
It can be negated by adjusting the \texttt { phase} parameter.
2021-11-30 14:17:02 +08:00
\newpage
2021-12-22 17:14:57 +08:00
\subsection { Periodic RF pulse (AD9910 Only)}
2021-12-06 11:52:31 +08:00
This examples demonstrates that the RF signal can be modulated by amplitude using the RAM modulation feature of AD9910.
2021-12-07 16:21:53 +08:00
By default, RAM profiles are programmed to profile 0.
2021-11-30 14:17:02 +08:00
2022-01-20 16:43:41 +08:00
\inputcolorboxminted { firstline=53,lastline=91} { examples/dds.py}
2021-11-30 14:17:02 +08:00
2021-12-06 11:52:31 +08:00
The generated RF output of the above example consists of the following features in sequence:
\begin { enumerate}
2021-12-22 17:12:42 +08:00
\item A 5 MHz RF pulse for 2 microseconds.
2021-12-06 11:52:31 +08:00
\item No signal for 1 microseconds.
2021-12-22 17:12:42 +08:00
\item A 5 MHz RF pulse for 1 microseconds.
2021-12-06 11:52:31 +08:00
\item No signal for 3 microseconds.
\item Go back to item 1.
\end { enumerate}
The expected waveform is plotted on the following figure.
2021-12-22 17:14:57 +08:00
Note that phase of the RF pulses may drift gradually.
Urukul was operated with a 50$ \Omega $ termination to produce the waveform.
\begin { tikzpicture} [
declare function={
func(\x )= (\x <0) * (0) +
and(\x >=0, \x <2) * (0.42*cos(deg(10*pi*\x ))) +
and(\x >=2, \x <3) * (0) +
and(\x >=3, \x <4) * (0.42*cos(deg(10*pi*\x )))) +
and(\x >=4, \x <7) * (0) +
and(\x >=7, \x <7.5) * (0.42*cos(deg(10*pi*\x )));
}
]
\begin { axis} [
axis x line=middle, axis y line=middle,
every axis x label/.style={
at={ (ticklabel* cs:1.05)} ,
anchor=west,
} ,
every axis y label/.style={
at={ (ticklabel* cs:1.05)} ,
anchor=south,
} ,
height=5cm,
width=16cm,
ymin=-0.5, ymax=0.5, ytick={ -0.42,0.42} , ylabel=Voltage ($ V $ ),
xmin=-0.5, xmax=7.5, xtick={ 0,...,7} , xlabel=Time ($ \mu s $ ),
]
\addplot [blue, samples=1000, domain=-0.5:7.5] { func(x)} ;
\end { axis}
\end { tikzpicture}
2021-12-06 11:52:31 +08:00
2021-12-22 17:16:21 +08:00
\subsection { Simple Amplitude Ramp (AD9910 Only)}
An amplitude ramp of an RF signal can be generated by modifying the \texttt { self.amp} array in the previous example.
2022-01-20 16:43:41 +08:00
\inputcolorboxminted { firstline=95,lastline=98} { examples/dds.py}
2021-12-22 17:16:21 +08:00
The generated RF output has an incrementing amplitude scale factor (ASF), increasing by 0.1 at every microsecond.
Once the ASF reaches 1.0, it drops back to 0.0 at the next microsecond.
The expected waveform over 1 cycle is plotted on the following figure.
Note that phase of the RF pulses may drift gradually.
Urukul was operated with a 50$ \Omega $ termination to produce the waveform.
\begin { tikzpicture} [
declare function={
func(\x )= and(\x >=0, \x <1) * (0) +
and(\x >=1, \x <2) * (0.05*cos(deg(10*pi*\x ))) +
and(\x >=2, \x <3) * (0.1*cos(deg(10*pi*\x ))) +
and(\x >=3, \x <4) * (0.15*cos(deg(10*pi*\x ))) +
and(\x >=4, \x <5) * (0.2*cos(deg(10*pi*\x ))) +
and(\x >=5, \x <6) * (0.25*cos(deg(10*pi*\x ))) +
and(\x >=6, \x <7) * (0.3*cos(deg(10*pi*\x ))) +
and(\x >=7, \x <8) * (0.35*cos(deg(10*pi*\x ))) +
and(\x >=8, \x <9) * (0.4*cos(deg(10*pi*\x ))) +
and(\x >=9, \x <10) * (0.45*cos(deg(10*pi*\x ))) +
and(\x >=10, \x <11) * (0.5*cos(deg(10*pi*\x )));
}
]
\begin { axis} [
axis x line=middle, axis y line=middle,
every axis x label/.style={
at={ (ticklabel* cs:1.05)} ,
anchor=west,
} ,
every axis y label/.style={
at={ (ticklabel* cs:1.05)} ,
anchor=south,
} ,
minor tick num=4,
grid=both,
height=8cm,
width=16cm,
ymin=-0.7, ymax=0.7, ytick={ -0.5,...,0,...,0.5} , ylabel=Voltage ($ V $ ),
xmin=0, xmax=11.5, xtick={ 0,...,11} , xlabel=Time ($ \mu s $ ),
]
\addplot [blue, samples=1500, domain=0:11] { func(x)} ;
\end { axis}
\end { tikzpicture}
\newpage
2021-12-06 11:52:31 +08:00
2021-12-22 17:17:03 +08:00
\subsection { RAM Synchronization (AD9910 Only)}
2021-12-07 16:26:25 +08:00
Multiple RAM channels can also be synchronized.
Similar to the 10 MHz single-tone RF signals, specify \texttt { phase} when calling \texttt { dds.set()} in \texttt { configure\char `_ ram\char `_ mode} .
For example, set phase to 0 for the channels (\texttt { phase=0.0} ).
2022-01-20 16:43:41 +08:00
\inputcolorboxminted { firstline=116,lastline=116} { examples/dds.py}
2021-12-07 16:26:25 +08:00
Then, replace the \texttt { run()} function with the following.
2022-01-20 16:43:41 +08:00
\inputcolorboxminted { firstline=122,lastline=134} { examples/dds.py}
2021-12-22 17:17:03 +08:00
Two phase-coherent RF signal with the same waveform as the previous figure (from either RAM examples) should be generated.
2021-12-07 16:26:25 +08:00
2022-01-05 16:19:16 +08:00
\subsection { Voltage-controlled DDS Amplitude (SU-Servo Only)}
2022-02-04 13:45:25 +08:00
The SU-Servo feature can be enabled by integrating the 4410 DDS Urukul with a 5108 Sampler.
2022-01-05 16:19:16 +08:00
Amplitude of the DDS output can be controlled by the ADC input of the Sampler through PI control, characterised by the following transfer function.
\[ H ( s ) = k _ p + \frac { k _ i } { s + \frac { k _ i } { g } } \]
In the following example, the amplitude of DDS is proportional to the ADC input from Sampler.
First, initialize the RTIO, SU-Servo and its channel.
Note that the programmable gain of the Sampler is $ 10 ^ 0 = 1 $ , the input range is [-10V, 10V].
2022-01-20 16:43:41 +08:00
2022-01-20 17:00:54 +08:00
\inputcolorboxminted { firstline=10,lastline=17} { examples/suservo.py}
2022-01-05 16:19:16 +08:00
Next, setup the PI control as an IIR filter. It has -1 proportional gain $ k _ p $ and no integrator gain $ k _ i $ .
2022-01-20 17:00:54 +08:00
\inputcolorboxminted { firstline=18,lastline=25} { examples/suservo.py}
2022-01-05 16:19:16 +08:00
Then, configure the DDS frequency to 10 MHz with 3V input offset.
2022-01-10 16:08:31 +08:00
When input voltage $ \geq $ offset voltage, the DDS output amplitude is 0.
2022-01-05 16:19:16 +08:00
2022-01-20 17:00:54 +08:00
\inputcolorboxminted { firstline=26,lastline=30} { examples/suservo.py}
2022-01-05 16:19:16 +08:00
SU-Servo encodes the ADC voltage in a linear scale [-1, 1].
Therefore, 3V is converted to 0.3.
Note that the ASF of all DDS channels are capped at 1.0, the amplitude clips when ADC input $ \leq - 7 V $ with the above IIR filter.
Finally, enable the SU-Servo channel with the IIR filter programmed beforehand.
2022-01-20 17:00:54 +08:00
\inputcolorboxminted { firstline=32,lastline=33} { examples/suservo.py}
2022-01-05 16:19:16 +08:00
A 10 MHz DDS signal is generated from the example above, with amplitude controllable by ADC.
The RMS voltage of the DDS channel against the ADC voltage is plotted.
The DDS channel is terminated with 50\textOmega .
\begin { center}
\begin { tikzpicture} [
declare function={
func(\x )= and(\x >=-10, \x <-7) * (160) +
and(\x >=-7, \x <3) * (16*(3-x)) +
and(\x >=3, \x <10) * (0);
}
]
\begin { axis} [
axis x line=middle, axis y line=middle,
every axis x label/.style={
at={ (axis description cs:0.5,-0.1)} ,
anchor=north,
} ,
every axis y label/.style={
at={ (ticklabel* cs:1.05)} ,
anchor=south,
} ,
2022-01-10 16:06:56 +08:00
minor x tick num=3,
2022-01-05 16:19:16 +08:00
grid=both,
height=8cm,
width=12cm,
2022-01-31 14:45:18 +08:00
ymin=-5, ymax=180, ytick={ 0,16,...,160} , ylabel=DDS RMS Voltage ($ mV _ { rms } $ ),
2022-01-05 16:19:16 +08:00
xmin=-10, xmax=10, xtick={ -10,-8,...,10} , xlabel=Sampler Voltage ($ V $ ),
]
2022-01-31 14:45:18 +08:00
\addplot [very thick, blue, samples=21, domain=-10:10] { func(x)} ;
2022-01-05 16:19:16 +08:00
\end { axis}
\end { tikzpicture}
\end { center}
2022-01-31 16:27:31 +08:00
DDS signal should be attenuated.
High output power affects the linearity due to the 1 dB compression point of the amplifier at 13 dBm output power.
15 dB attenuation at the digital attenuator was applied in this example.
2022-01-05 16:19:16 +08:00
2021-11-30 14:17:02 +08:00
\section { Ordering Information}
2022-02-04 13:45:25 +08:00
To order, please visit \url { https://m-labs.hk} and select the 4410 DDS Urukul in the ARTIQ Sinara crate configuration tool.
The default chip is AD9910 (4410 DDS Urukul), which supports more features.
If you need the higher frequency resolution of the AD9912 (4412 DDS Urukul), leave us a note when placing the order.
2022-01-05 16:19:16 +08:00
To enable SU-Servo feature between 4410 Urukul and 5108 Sampler, specify that SU-Servo is to be integrated into the gateware when placing the order.
2021-12-02 13:29:35 +08:00
The cards may also be ordered separately by writing to \url { mailto:sales@m-labs.hk} .
2021-11-30 14:17:02 +08:00
\section * { }
\vspace * { \fill }
\begin { footnotesize}
2022-01-14 11:55:48 +08:00
Information furnished by M-Labs Limited is provided in good faith in the hope that it will be useful. However, no responsibility is assumed by M-Labs Limited for its use. Specifications may be subject to change without notice.
2021-11-30 14:17:02 +08:00
\end { footnotesize}
\end { document}
