c3ae34123c
fix nalgebra url
2024-11-13 16:16:04 +08:00
9f5e15e6d2
kernel/linalg: remove redundant unsafe blocks
2024-11-13 16:16:03 +08:00
fbb636460b
cargo fmt
2024-11-13 16:16:03 +08:00
fad1db9796
comms: remove idle kernel DRTIO error case
2024-08-05 19:28:09 +08:00
fee30033ec
comms: run idle kernel on start-up
2024-08-05 19:28:09 +08:00
fe6f259d48
kernel: add linalg functions
2024-08-01 18:20:32 +08:00
e4d7ce114f
flake: update fastnumbers
2024-08-01 07:41:32 +08:00
63f4783687
subkernels: support exceptions from subkernels
2024-07-31 17:22:29 +08:00
69a0b1bfb7
subkernels: raise exceptions to kernel
2024-07-31 17:22:29 +08:00
f6bff80105
flake: update dependencies
2024-07-31 17:20:54 +08:00
57fd327ecb
rustfmt
2024-07-22 18:55:17 +08:00
69d5b11ebf
kernel/api: add nalgebra::linalg methods
2024-07-22 11:57:58 +08:00
bab938c563
add nalgebra dependency
...
Co-authored-by: abdul124 <ar@m-labs.hk>
Co-committed-by: abdul124 <ar@m-labs.hk>
2024-07-22 11:13:45 +08:00
d51e5e60c3
repeater: handle async messages
2024-07-09 23:04:34 +08:00
23857eef63
allow toggling SED spread with flash config key
2024-07-09 18:11:20 +08:00
d0615bf965
flake: update dependencies
2024-07-09 10:37:37 +02:00
3a789889cf
kernel/api: add rint api
2024-07-05 14:53:09 +08:00
72b814f7fd
repeater: clear buffer after ping
2024-07-04 17:30:04 +08:00
ead20a66a5
flake: update dependencies
2024-06-06 10:05:55 +08:00
586fd2f17e
Gateware: remove redundant si549.py & wrpll.py
2024-05-30 15:27:16 +08:00
377f8779a0
kasli soc: refactor to use wrpll from artiq
2024-05-30 15:25:33 +08:00
1fbaacfc43
flake: update artiq
2024-05-30 15:14:02 +08:00
127ea9ea4d
flake: update dependencies
2024-05-28 17:30:49 +08:00
174c301d7d
add llvmPackages_11
2024-05-24 15:29:29 +08:00
52defff000
flake: update dependencies
2024-05-24 15:29:19 +08:00
2b2ebb5354
aux: increase max payload size
2024-05-20 15:20:06 +08:00
4341d2d2a5
update to LLLVM 14
2024-05-09 10:05:33 +08:00
57b885ed99
flake: update dependencies
2024-05-09 10:03:57 +08:00
e922543855
flake: update dependencies
2024-05-08 18:56:15 +08:00
35ea0ed2ca
WRPLL: add filter for DRTIO 100MHz
2024-05-08 18:50:55 +08:00
cdf4ff24c0
WRPLL: replace PI controller with new filter
2024-05-08 18:50:55 +08:00
285b02c4b1
WRPLL: remove anti-windup
2024-05-08 18:50:55 +08:00
53cb592d19
kasli soc: add rtio_frequency cfg for runtime
2024-05-08 16:14:56 +08:00
c261897658
rename build derivation to board-package-set
2024-04-29 13:05:49 +08:00
1d603c73b7
DDMTD: replace 1st edge to median edge deglitcher
2024-04-29 13:05:02 +08:00
61315c29b9
Si549: recalibrate TAG_OFFSET for ISERDESE2
2024-04-29 13:03:30 +08:00
3f57de6ec7
DDMTD: replace FD with ISERDESE2
2024-04-29 13:03:30 +08:00
cca23aa2a5
wrpll runtime: reduce mmcm output jitter
...
rtio_clocking: update mmcm setting to use HIGH bandwidth
2024-04-29 11:20:50 +08:00
2bbaea3ad5
SMAFreqMulti: set mmcm bw to HIGH for lower jitter
2024-04-29 11:20:50 +08:00
5abd274060
update copyright year
2024-04-26 12:26:30 +08:00
3abe9caadb
flake: update dependencies
2024-04-26 11:37:14 +08:00
0a19f8fb89
satman: revert async flag changes
2024-04-26 11:37:14 +08:00
a30c7d1f3a
runtime: drtio aux refactoring, revert async flag
2024-04-26 11:37:14 +08:00
2d10503c20
libboard_artiq: support multiple aux rx buffers
2024-04-24 17:12:57 +08:00
92a29051f7
drtio_aux_controller: support aux_buffer_count
2024-04-24 17:12:39 +08:00
14fa038118
Firmware: Runtime WRPLL
...
runtime: drive CLK_SEL to true when si549 is used
runtime & libboard_artiq: allow standalone to use io_expander
si549: add bit bang mmcm dynamic configuration
si549: add frequency counter for refclk
rtio_clocking & si549: add 125Mhz wrpll refclk setup
2024-04-12 16:38:46 +08:00
b81323af30
Firmware: Satman skew calibration & tester
...
cargo template: add calibrate_wrpll_skew feature
tag collector: add TAG_OFFSET for Satman WRPLL
tag collector: add TAG_OFFSET getter & setter for calibration
wrpll: add skew tester and calibration
wrpll: gate calibration behind calibrate_wrpll_skew feature
2024-04-12 16:38:46 +08:00
291777f764
Firmware: Satman WRPLL
...
satman: drive CLK_SEL to true when si549 is used
satman : add main & helper si549 setup
satman : add WRPLL select_recovered_clock
si549: add tag collector to process gtx & main tags
si549: add frequency counter to set BASE_ADPLL
si549: add set_adpll for main & helper PLL
si549: add main & helper PLL
FIQ & si549: replace dummy with a custom handler for gtx & main tags ISR
2024-04-12 16:38:39 +08:00
a1d80fb93b
Firmware: Si549 and io_expander
...
io_expander: set CLK_SEL pin to output when si549 is used
io_expander: gate virtual leds for standalone
si549: add bit bang i2c
si549: add si549 programming
si549: add main & helper setup
2024-04-11 15:18:10 +08:00
7827c7b803
Gateware: kasli_soc WRPLL setup
...
kasli_soc: use enable_wrpll from json to switch from si5324 to si549
kasli_soc: add wrpll for all variants
kasli_soc: add gtx & main tag nFIQ for all variants
kasli_soc: add clk_synth_se for master & satellite
kasli_soc: add wrpll_refclk for runtime
kasli_soc: add skewtester for satman
kasli_soc: add WRPLL_REF_CLK config for firmware
2024-04-11 15:18:10 +08:00
