57fd327ecb
rustfmt
2024-07-22 18:55:17 +08:00
69d5b11ebf
kernel/api: add nalgebra::linalg methods
2024-07-22 11:57:58 +08:00
bab938c563
add nalgebra dependency
...
Co-authored-by: abdul124 <ar@m-labs.hk>
Co-committed-by: abdul124 <ar@m-labs.hk>
2024-07-22 11:13:45 +08:00
d51e5e60c3
repeater: handle async messages
2024-07-09 23:04:34 +08:00
23857eef63
allow toggling SED spread with flash config key
2024-07-09 18:11:20 +08:00
3a789889cf
kernel/api: add rint api
2024-07-05 14:53:09 +08:00
72b814f7fd
repeater: clear buffer after ping
2024-07-04 17:30:04 +08:00
586fd2f17e
Gateware: remove redundant si549.py & wrpll.py
2024-05-30 15:27:16 +08:00
377f8779a0
kasli soc: refactor to use wrpll from artiq
2024-05-30 15:25:33 +08:00
2b2ebb5354
aux: increase max payload size
2024-05-20 15:20:06 +08:00
35ea0ed2ca
WRPLL: add filter for DRTIO 100MHz
2024-05-08 18:50:55 +08:00
cdf4ff24c0
WRPLL: replace PI controller with new filter
2024-05-08 18:50:55 +08:00
285b02c4b1
WRPLL: remove anti-windup
2024-05-08 18:50:55 +08:00
53cb592d19
kasli soc: add rtio_frequency cfg for runtime
2024-05-08 16:14:56 +08:00
1d603c73b7
DDMTD: replace 1st edge to median edge deglitcher
2024-04-29 13:05:02 +08:00
61315c29b9
Si549: recalibrate TAG_OFFSET for ISERDESE2
2024-04-29 13:03:30 +08:00
3f57de6ec7
DDMTD: replace FD with ISERDESE2
2024-04-29 13:03:30 +08:00
cca23aa2a5
wrpll runtime: reduce mmcm output jitter
...
rtio_clocking: update mmcm setting to use HIGH bandwidth
2024-04-29 11:20:50 +08:00
2bbaea3ad5
SMAFreqMulti: set mmcm bw to HIGH for lower jitter
2024-04-29 11:20:50 +08:00
0a19f8fb89
satman: revert async flag changes
2024-04-26 11:37:14 +08:00
a30c7d1f3a
runtime: drtio aux refactoring, revert async flag
2024-04-26 11:37:14 +08:00
2d10503c20
libboard_artiq: support multiple aux rx buffers
2024-04-24 17:12:57 +08:00
92a29051f7
drtio_aux_controller: support aux_buffer_count
2024-04-24 17:12:39 +08:00
14fa038118
Firmware: Runtime WRPLL
...
runtime: drive CLK_SEL to true when si549 is used
runtime & libboard_artiq: allow standalone to use io_expander
si549: add bit bang mmcm dynamic configuration
si549: add frequency counter for refclk
rtio_clocking & si549: add 125Mhz wrpll refclk setup
2024-04-12 16:38:46 +08:00
b81323af30
Firmware: Satman skew calibration & tester
...
cargo template: add calibrate_wrpll_skew feature
tag collector: add TAG_OFFSET for Satman WRPLL
tag collector: add TAG_OFFSET getter & setter for calibration
wrpll: add skew tester and calibration
wrpll: gate calibration behind calibrate_wrpll_skew feature
2024-04-12 16:38:46 +08:00
291777f764
Firmware: Satman WRPLL
...
satman: drive CLK_SEL to true when si549 is used
satman : add main & helper si549 setup
satman : add WRPLL select_recovered_clock
si549: add tag collector to process gtx & main tags
si549: add frequency counter to set BASE_ADPLL
si549: add set_adpll for main & helper PLL
si549: add main & helper PLL
FIQ & si549: replace dummy with a custom handler for gtx & main tags ISR
2024-04-12 16:38:39 +08:00
a1d80fb93b
Firmware: Si549 and io_expander
...
io_expander: set CLK_SEL pin to output when si549 is used
io_expander: gate virtual leds for standalone
si549: add bit bang i2c
si549: add si549 programming
si549: add main & helper setup
2024-04-11 15:18:10 +08:00
7827c7b803
Gateware: kasli_soc WRPLL setup
...
kasli_soc: use enable_wrpll from json to switch from si5324 to si549
kasli_soc: add wrpll for all variants
kasli_soc: add gtx & main tag nFIQ for all variants
kasli_soc: add clk_synth_se for master & satellite
kasli_soc: add wrpll_refclk for runtime
kasli_soc: add skewtester for satman
kasli_soc: add WRPLL_REF_CLK config for firmware
2024-04-11 15:18:10 +08:00
e4d8d44c7c
Gateware: WRPLL
...
ddmtd: add DDMTD and deglitcher
wrpll: add helper clockdomain
wrpll: add frequency counter
wrpll: add skewtester
wrpll: add gtx & main tag collection
wrpll: add gtx & main tag eventmanager for shared peripheral interrupt
wrpll: add SMA frequency multiplier to generate 125Mhz refclk
si549: add i2c and adpll programmer
2024-04-11 15:18:04 +08:00
4455f740d2
main: set exception vector table addr
...
linker: add exceptions start & end symbol
2024-03-07 15:37:42 +08:00
63bf1c81d4
fiq: use dummy handler to fix compilation error
2024-03-07 13:26:52 +08:00
bfb582f99b
cargo fmt
2024-02-01 14:43:41 +08:00
52e64fb2f9
subkernel: use negative ID for argument passing
2024-02-01 14:43:41 +08:00
facc98058c
subkernel: fix DMA return control to wrong master
2024-02-01 14:43:41 +08:00
f0f81dbf8a
subkernel: support no-timeout, message passing
2024-02-01 14:43:41 +08:00
30e6bf4a3a
subkernel: add support for (d)dma
2024-01-11 12:33:02 +08:00
8f4e30dd9c
satman: support sub-subkernels, routing
2024-01-11 12:33:02 +08:00
e31a31c4ff
master: drtioaux:
...
- support async flag
- source in packets
- rerouting packets
2024-01-11 12:33:02 +08:00
6ca1719033
comms: fix compilation on standalone
2023-11-14 14:08:31 +08:00
aebc739c1e
add support for tar flashable (sub)kernels
2023-11-13 11:24:23 +08:00
e1b2c45813
kasli_soc & zc706: Fix GTX Clock Path during INIT
2023-11-07 18:55:08 +08:00
e6372b9766
zynq_clocking: Allow ext signal to set cur_clk csr
...
- for example, current_clock csr can be connected to tx_init.done
2023-11-07 18:55:08 +08:00
07044752b6
zynq_clocking: add ext_async_rst to AsyncRstSYNCR
2023-11-07 18:55:08 +08:00
79fc5a7789
zynq_clocking: expose mmcm_locked for SYSCRG
...
- mmcm_locked -> self.mmcm_locked
2023-11-07 18:55:08 +08:00
6c8346ca5f
subkernel: improve stability,
...
fix exception on awaiting message
2023-11-02 16:58:34 +08:00
b76f634686
drtio: increase robustness for longer payloads
2023-11-02 14:48:52 +08:00
4a34777b97
refactor i2c, io_expander, task under the same cfg
2023-10-25 11:52:04 +08:00
43e4527392
fix kasli-soc demo compilation warning
2023-10-25 11:45:13 +08:00
0a3bfc9a61
subkernel: separate tags and data
2023-10-18 12:03:43 +08:00
d3fbfd75b0
Fix grabber build and warning
...
Signed-off-by: Egor Savkin <es@m-labs.hk>
2023-10-18 11:24:43 +08:00
b768d5648c
Add grabber module
...
Signed-off-by: Egor Savkin <es@m-labs.hk>
2023-10-16 14:35:20 +08:00
812aea33b3
rustfmt
2023-10-11 17:56:30 +08:00
136e24f597
kasli-soc: Add BUFG to the IBUFGDS for MMCM CLKIN1
...
- Fix Vivado Compilation Error [DRC REQP-119]
- MMCME2_ADV CLKIN1 and CLKIN2 are now driven from the same source type (BUFG)
2023-10-11 16:45:26 +08:00
a4d1be00c0
Firmware: Add drtio_eem.rs support
...
- Port from Artiq repo
- Initialize the drtio_eem on main, rtio_clocking
- Driver for eem_transceiver
2023-10-10 11:22:05 +08:00
b15322b6ba
kasli_soc: Add support for shuttler on gateware
...
- Port from artiq repo
- Add EEM_DRTIO gateware
2023-10-10 11:22:05 +08:00
8fd1306145
zynq_clocking: Add sys5x, 208MHz CLK & IDELAYCTRL
...
- Port from artiq repo
- Generate sys5x for for EEM Serdes, 208MHz REF Clock for IDELAYCTRL
- Add IDELAYCTRL for IDEALYE2 in EEM Serdes
2023-10-10 11:21:34 +08:00
a28a819b18
add manifests target to PHONY
2023-10-09 18:29:53 +08:00
3f414278e2
cleanup
2023-10-09 18:28:20 +08:00
e5aafad60d
force cargo to use our copy of zynq-rs
2023-10-09 18:27:58 +08:00
b9a0bcabeb
ksupport: fix build on acpki variants
2023-10-09 17:10:45 +08:00
8eb359ee42
cargo fmt
2023-10-09 11:50:47 +08:00
7263862fd8
satellite: support optional args
2023-10-09 11:42:51 +08:00
29cc0a6e28
ddma/subkernel: fix wrong destination reported
2023-10-09 11:42:51 +08:00
616c40429e
satellite: process kernel requests more often
2023-10-09 11:42:51 +08:00
3ea8147966
subkernel: send async statuses when requested
2023-10-09 11:42:51 +08:00
cb79c12284
satellite: support subkernels
2023-10-09 11:42:51 +08:00
623cc7b79e
libkernel -> ksupport
2023-10-09 11:42:51 +08:00
49205eea17
satellite gateware: add kernel rtio to cri
2023-10-09 11:36:23 +08:00
6885c618b5
move kernel-related code to separate library
2023-10-09 11:36:23 +08:00
c696fd826f
master: support optional args
2023-10-09 10:35:47 +08:00
4b3c9a3d08
rtio_mgt: remove support for async messages
2023-10-09 10:35:47 +08:00
779aea7c6a
check subkernel exceptions only when awaited
2023-10-09 10:35:03 +08:00
6785ca2c85
subkernel: port master support
2023-10-09 10:35:03 +08:00
656cbf4546
kasli_soc: use sed_lanes value from HW description
...
https://github.com/m-labs/artiq/pull/1745 added a field for setting the number of SED lanes to the HW description. This commit makes it so that the setting is used for Kasli Soc as well.
2023-10-06 15:37:56 +01:00
ecd4ca333c
rtio_clocking: inform the user if PLL is bypassed
2023-10-06 16:27:25 +08:00
ae3099dd8e
kasli_soc: support 100MHz clock
2023-10-06 16:27:25 +08:00
49810da188
runtime: wait longer for PLL lock
2023-10-05 12:17:43 +08:00
e451598a06
satman: fix dma reporting wrong destination
2023-09-22 10:29:48 +08:00
f4ceca464f
drtio: change async messages to sync
2023-09-21 14:18:25 +08:00
f3dcd53086
firmware: fix zc706 compilation warnings
...
Co-authored-by: morgan <mc@m-labs.hk>
Co-committed-by: morgan <mc@m-labs.hk>
2023-09-11 15:21:56 +08:00
b3856e879b
refactor write_rustc_cfg_file()
2023-09-11 11:48:19 +08:00
1ccae0d442
consolidate all write..file() into config.py
2023-09-11 11:48:19 +08:00
2c19f4ac31
replace rustc_cfg[ ] & change write_rustc_cfg_file
2023-09-11 11:48:19 +08:00
85ecff2cc1
cargo: update zynq-rs
2023-09-07 19:01:36 +08:00
3a305c8cac
Revert "cargo: update dependencies"
...
This reverts commit 38b0799bb0
2023-09-07 19:00:16 +08:00
38b0799bb0
cargo: update dependencies
2023-09-07 18:54:30 +08:00
615f2e3d37
remove misleading 'Actively' from docs at main.rs
2023-09-06 10:53:26 +08:00
37df7fd45b
cargo fmt
2023-08-30 16:14:35 +08:00
2ac7eedec1
firmware: fix compilation without virtual LEDs
...
Co-authored-by: morgan <mc@m-labs.hk>
Co-committed-by: morgan <mc@m-labs.hk>
2023-08-30 15:33:44 +08:00
MorganTL
c61017fbe6
fix compiling error when cfg has has_rtio_moninj
2023-08-30 15:32:09 +08:00
MorganTL
0e6309b95e
change write_rustc_cfg_file to follow artiq repo
2023-08-30 14:56:12 +08:00
1516327c26
firmware: fix zc706 compilation error
...
Co-authored-by: morgan <mc@m-labs.hk>
Co-committed-by: morgan <mc@m-labs.hk>
2023-08-29 11:25:28 +08:00
622d267d55
add virtual LEDs, improve IO expander setup, drive TX_DISABLE
...
Co-authored-by: morgan <mc@m-labs.hk>
Co-committed-by: morgan <mc@m-labs.hk>
2023-08-28 16:08:10 +08:00
4ae8557018
drtio: remame drtio_transceiver to gt_drtio
...
Co-authored-by: linuswck <linuswck@m-labs.hk>
Co-committed-by: linuswck <linuswck@m-labs.hk>
2023-08-28 13:05:40 +08:00
dc08c382a2
satman: wait longer for PLL lock ( #246 )
2023-08-13 13:52:12 +08:00
ca17cd419e
Revert "kasli_soc: add SFP0..3 LED indication"
...
This reverts commit 5111778363
2023-08-03 10:42:09 +08:00
5111778363
kasli_soc: add SFP0..3 LED indication
...
Co-authored-by: morgan <mc@m-labs.hk>
Co-committed-by: morgan <mc@m-labs.hk>
2023-07-24 16:30:14 +08:00
ee438105b2
json: base -> drtio_role
2023-06-16 17:03:25 +08:00
f1ee3a7584
rustfmt
2023-05-30 12:22:46 +08:00
63594d7e3d
update configuration of IBUFDS_GTE2
...
Input clock is terminated internally with 50 Ohm on each leg and to 4/5 MGTAVCC.
2023-05-30 12:08:41 +08:00
