zynq-rs/openocd/zynq-7000.cfg

#
# Xilinx Zynq 7000 SoC
#
#  Chris Johns <chrisj@rtems.org>
#
# Setup
# -----
#
# Create a user configuration following the "Configuration Basics" in the user
# documentation. In the file have:
#
#    source [find interface/ftdi/flyswatter2.cfg]
#    source [find board/zynq-zc706-eval.cfg]
#    adapter_khz 2000
#    init
#

if { [info exists CHIPNAME] } {
    global _CHIPNAME
    set _CHIPNAME $CHIPNAME
} else {
    global _CHIPNAME
    set _CHIPNAME zynq
}

if { [info exists ENDIAN] } {
    set _ENDIAN $ENDIAN
} else {
    # this defaults to a bigendian
    set _ENDIAN little
}

if { [info exists SMP] } {
    global _SMP
    set _SMP 1
} else {
    global _SMP
    set _SMP 0
}

#
# PL Tap.
#
# See ug585 ZYNQ-7000 TRM PSS_IDCODE for how this number is constructed.
#   0x03731093 - ZC706 Eval board 1.1
#   0x23731093 - ??
#   0x23727093 - Zedboard Rev. C and D
#
# Set in your configuration file or board specific file.
#
if { [info exists PL_TAPID] } {
    set _PL_TAPID $PL_TAPID
} else {
    set _PL_TAPID 0x03731093
}

jtag newtap $_CHIPNAME tap -irlen 6 -ircapture 0x001 -irmask 0x003 \
    -expected-id $_PL_TAPID

#
# CoreSight Debug Access Port
#
if { [info exists DAP_TAPID] } {
    set _DAP_TAPID $DAP_TAPID
} else {
    set _DAP_TAPID 0x4ba00477
}

jtag newtap $_CHIPNAME dap -irlen 4 -ircapture 0x01 -irmask 0x03 \
    -expected-id $_DAP_TAPID

#
# GDB target: Cortex-A9, using DAP, configuring only one core
# Base addresses of cores:
# core 0  -  0xF8890000
# core 1  -  0xF8892000
#
# Read from the ROM table with the patch to read the nested table.
#

set _TARGETNAME_0 $_CHIPNAME.cpu.0
set _TARGETNAME_1 $_CHIPNAME.cpu.1

dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.dap
target create $_TARGETNAME_0 cortex_a -coreid 0 \
    -endian $_ENDIAN \
    -dap $_CHIPNAME.dap \
    -dbgbase 0x80090000
if { $_SMP } {
    echo "Zynq CPU1."
    target create $_TARGETNAME_1 cortex_a -coreid 1 \
        -endian $_ENDIAN \
        -dap $_CHIPNAME.dap \
        -dbgbase 0x80092000
    target smp $_TARGETNAME_0 $_TARGETNAME_1
}