morgan
1b714a8ca0
gic: add disable individual interrupt support mpcore: refactor icdicer registers as array main: start timer with interrupt and add IRQ |
||
---|---|---|
.cargo | ||
experiments | ||
libasync | ||
libboard_zynq | ||
libconfig | ||
libcortex_a9 | ||
libregister | ||
libsupport_zynq | ||
openocd | ||
szl | ||
.gitignore | ||
Cargo.lock | ||
Cargo.toml | ||
LICENSE | ||
README.md | ||
armv7-none-eabihf.json | ||
flake.lock | ||
flake.nix | ||
fsbl.patch | ||
kasli_soc_por.py | ||
remote_run.sh |
README.md
Bare-metal Rust on Zynq-7000
Supported features:
- Clocking setup
- UART
- SDRAM setup
- Ethernet with smoltcp and async-await on TCP sockets
- SD card
- PL programming and startup
- Pure Rust SZL first-stage bootloader, with SD boot and netboot
- Control of second CPU core and message passing, with async-await support
Supported boards:
- Kasli-SoC
- ZC706
- Red Pitaya
- Cora Z7-10 (seems to also run on Cora Z7-07S, including dual-core support)
Build
Zynq-rs is packaged using the Nix Flakes system. Install Nix 2.4+ and enable flakes by adding experimental-features = nix-command flakes
to nix.conf
(e.g. ~/.config/nix/nix.conf
).
You can build SZL or experiments crate for the platform of your choice by using nix build
command, e.g.
nix build .#coraz7-experiments
Alternatively, you can still use cargo xbuild
within nix develop
shell.
nix develop
cargo xbuild --release -p experiments
Currently the ELF output is placed at target/armv7-none-eabihf/release/experiments
, or result/experiments.elf
for Nix Flakes build.
Debug
Running on the ZC706
nix develop
cargo xbuild --release -p experiments
cd openocd
openocd -f zc706.cfg
Running on the Cora Z7-10
nix develop
cargo xbuild --release -p experiments --no-default-features --features=target_coraz7
cd openocd
openocd -f cora-z7-10.cfg
Loading a bitstream into volatile memory
openocd -f zc706.cfg -c "pld load 0 blinker_migen.bit; exit"
License
Copyright (C) 2019-2022 M-Labs Limited. Released under the GNU LGPL v3. See the LICENSE file for details.