linuswck
253f4410ee
sys_timer: Add fn to retrieve ts in us resolution
2024-10-10 13:31:20 +08:00
linuswck
bd72c382b0
thermostat: Fix incorrect Dac Calibration Algo
...
- Thermostat Firmware repo PR #133
2024-10-08 15:57:18 +08:00
linuswck
a512614de5
net: add option not to open sock when it is polled
...
- fix a bug, which mcu can get stuck in State::HardReset indefinitely
2024-09-11 17:54:23 +08:00
linuswck
76f7875e3a
gui: await for hard rst and dfu action
2024-09-11 17:54:23 +08:00
linuswck
0d64d62fb0
gui: Add pd_mon config form
...
- force user to follow a sequence of steps for safely configuring pd_mon
2024-09-11 17:54:18 +08:00
linuswck
0aeffdbf7b
ld_pwr_exc_protector: disable irq after pwr off
...
-setting 0V threshold during power off might trigger IRQ
2024-09-11 17:05:38 +08:00
linuswck
89a1270c02
driver: send cmd err msg to a pyqt sig
2024-09-11 17:05:38 +08:00
linuswck
c2e78e6f17
driver: Support ApplyPdParams cmd
...
- Include handling mechanism for "InvalidSettings"b response msg
2024-09-11 17:05:38 +08:00
linuswck
86e6d3764e
laser: check pd_mon params & pwr limit before set
...
- Design to prevent Issue #47 on hardware kirdy repo from happening
- responsitivity, i_dark & transconductance determine the pwr limit range
- when "ApplyPdParams" and "SetLdPwrLimit" are called, pwr limit range
is checked before applying new parameter
- Send out a "InvalidSettings" response with error message if settings
cannot be applied
- Add settable power range to settings json object
2024-09-11 17:05:34 +08:00
linuswck
1111967a7b
gui: add arg for saving log to a file
2024-09-04 17:21:13 +08:00
linuswck
1896e2534b
main: Add PrepareForDfu state
2024-09-04 16:12:06 +08:00
linuswck
6d4b1b0574
driver: end_session if ConnClose & Dfu is recv-ed
2024-09-04 16:10:42 +08:00
linuswck
0b5fda2cd9
net: close oldest sock if available socks run out
...
- By default, smoltcp by default reset any new connections
if there is no available socket
2024-09-04 15:46:43 +08:00
linuswck
b763350a8b
net: disable IRQ when data is being enqueued
...
- This prevents broken json to be sent out due to IRQ
2024-09-04 15:46:43 +08:00
linuswck
838592c812
gui: Display hw_rev when connected
2024-09-04 15:46:43 +08:00
linuswck
e632cbbfdd
driver: use readuntil to get response msg
...
- The driver may recv partial ctrl msg, which causes a json decode error
2024-09-04 15:46:43 +08:00
linuswck
27bf573010
driver: retrieve hw_rev after conn is established
2024-09-04 15:45:27 +08:00
linuswck
c267c30b89
driver: add get_hw_rev() fn
2024-09-04 15:39:27 +08:00
linuswck
c5826876a6
firmware: Add cmd to get hw_rev
2024-09-04 15:39:27 +08:00
linuswck
6782cda790
Update pid autotuner code
2024-09-04 15:39:27 +08:00
linuswck
2fe2ef531b
Update example code
2024-09-04 15:39:27 +08:00
linuswck
f2ad06ecae
gui: patch the GUI code
2024-09-04 15:39:27 +08:00
linuswck
5166bb7ba8
driver: rm thread use & make it asyncio callable
...
- make all cmds asyncio callable
- control specific cmds can be enqueued to the handler synchronously
2024-09-04 15:39:21 +08:00
linuswck
9c611fc861
main: poll iface for dfu & hard rst ctrl msgs
2024-09-03 12:15:03 +08:00
linuswck
51913f2e2f
net: fix incorrect poll_iface() calls
...
- poll_iface might be called by interrupt while poll_iface was being called in main loop
- Disable interrupt when poll_iface is being processed
- Only use IfacePollTimer to poll_iface
2024-08-27 18:49:43 +08:00
linuswck
c86d67b15c
firmware: do not display smoltcp log
2024-08-27 18:49:43 +08:00
linuswck
3d2294a90c
driver: fix incorrect recv_response behavior
2024-08-27 18:49:13 +08:00
linuswck
3ba8b99084
Use degree celsius as temperature base unit
...
- Breaking: Erase settings before flashing
- except beta in Steinhart-Hart equation
- to keep the temperature value set consistent with the value returned
- f32 floating point calculation is inaccurate
2024-08-07 17:36:12 +08:00
linuswck
af73ac8127
gui: Add text for LD & Thermostat status
2024-08-07 12:48:12 +08:00
linuswck
c214e4182d
temp_mon: fix limits not effective at stable temp
...
- previously, temp is stable, temp limits are not checked
2024-08-07 12:12:07 +08:00
linuswck
fb69ae3306
main: Don't change temp ctrl mode at otp
2024-08-07 11:26:47 +08:00
linuswck
8c8ed12522
gui: Disable param tree compact height
...
- The displayed number was clipped by the pyqtgraph spinbox
2024-08-06 13:01:57 +08:00
linuswck
572e2dbc5d
gui: update for the new driver code
...
- Default to use active report mode
- Connection will be retried upon abnormal disconnection
- Remove poll every _s and apply btn
2024-08-06 13:01:57 +08:00
linuswck
82c46e04d0
Update PID Autotune Code for Driver Code
2024-08-06 13:01:57 +08:00
linuswck
28f8c3c497
Update Example Code for Driver Code
2024-08-06 13:01:57 +08:00
linuswck
47bf166ecb
driver: kirdy driver rewrite
...
- Start a new thread to handle connections and schedule FIFO task execution
- Make all the cmd accessible without using async
- Connections automatically retry upon disconnection
- Add support for PyQt6 Signal
2024-08-06 13:01:54 +08:00
linuswck
1dcac25574
gui: Use a custom regex to handle the suffix with temperature characters
2024-07-31 11:35:04 +08:00
linuswck
3f9a4bf140
ld: Block pwr on request if alarm is asserted
...
- Align the alarm and pwr up behavior with thermostat temp_mon
2024-07-26 14:29:46 +08:00
linuswck
201148fb21
main: allow loading flash without device settings
...
- Fix bugs: ld & thermostat settings cannot be loaded if device settings
are not present. But, device settings can be left not configured.
2024-07-26 11:10:32 +08:00
linuswck
a90031dd6c
ld_pwr_exc_protector: clear irq bit at pwr up
2024-07-26 11:10:32 +08:00
linuswck
7b52072617
ld: cfg hardware when pd_mon params changes
2024-07-26 11:10:32 +08:00
linuswck
c241d34434
gui: fix default units and mv to params' titles
...
- siPrefix(eg. m, u, k) is no longer editable and fixed
- the displayed unit is relocated to ctrl panel params' titles
2024-07-26 11:10:28 +08:00
linuswck
20c3d42dd7
rm ld soft current limit
2024-07-25 15:53:00 +08:00
linuswck
aae89256c3
gui: fix ctrl_panel value getting overwritten bug
2024-07-24 12:19:26 +08:00
linuswck
3344e7ab19
rm debug comments
2024-07-23 10:39:33 +08:00
linuswck
a76b8de994
thermostat: Save the user config-ed value directly
...
- the firmware recorded the actual value set with quantization errors or
other errors
- this caused confusion for the user when they read back the settings
2024-07-22 17:37:25 +08:00
linuswck
3410a271fd
thermostat: rst pid_state at pwr_up
2024-07-22 10:54:01 +08:00
linuswck
8f38acd0f2
thermostat: do not rst tec_i_out to 0 at pwr down
2024-07-22 10:52:32 +08:00
linuswck
b95b9dcefa
gui: Display -273.15 if thermistor is not detected
...
- if tec_temp == None -> Hide temp_plot graph and display -273.15 on ctrl panel
2024-07-19 18:37:52 +08:00
linuswck
5e6a4c0646
gui: Do not turn on report mode for PID Autotune
2024-07-19 18:24:14 +08:00