09827b4d44
gui: Configure graph's range width and bound
...
- Upgrade to pglive v0.8
- Add a new patch for new options for specifying display range width
and bound
2025-01-27 12:43:58 +08:00
d8ddd5fb24
gui: rm generated ui_x.py files
2025-01-27 12:43:58 +08:00
6db375d6b8
Fix incorrect Adc filter settings name
2025-01-27 12:43:58 +08:00
7267794e49
gui: Change label texts
2025-01-27 12:43:54 +08:00
3affe47293
gui: display warning msg if recv-ed
2025-01-24 18:32:33 +08:00
7bdb7e48df
driver: Add handling for warning msgs
2025-01-24 18:32:33 +08:00
9bec46490d
gui: Include firmware rev in About msg box
2025-01-24 16:59:49 +08:00
0e707e3d6b
driver: Add fn to get the firmware rev
2025-01-24 16:59:49 +08:00
6ad41c8502
gui: Do not use window title in info_box
...
- info_box does not resize with the title length
- On MacOS, the title won't be displayed
2025-01-24 16:59:49 +08:00
2a6db53dc8
driver: wait for the read_response task to complete before connection retry
2025-01-23 11:52:02 +08:00
7dd551201e
driver: fix bug in failing to emit error msg
2025-01-23 11:52:02 +08:00
753a16ab8e
driver: Close incoming awaitable fn if queue is full
2025-01-23 11:52:02 +08:00
76a19cb65a
driver: rm data validation
...
- Data validation is done on Kirdy Server side
- Thus, remove duplicated logic
- Merge send_cmd and send_raw_cmd
2025-01-23 11:51:56 +08:00
cd3347798c
driver, firmware: Rm active report mode & cmd
2025-01-21 11:31:02 +08:00
85f81ee8e4
Change default tcp port 1337 -> 1550
2025-01-09 16:38:02 +08:00
4d8e16771e
gui: Correct Pid Autotune output current limit
2024-10-29 12:59:15 +08:00
4d332328c0
gui: Limit min PD Mon Pwr y axis range to 0-100uW
2024-10-23 12:24:57 +08:00
49dc8a9b96
gui: autotuner only set_i when relay state changes
...
- Previously, autotuner issues set_i cmd for each report obj received
- These change increase the maximum autotune-able PID update rate with GUI
2024-10-22 18:09:39 +08:00
a1b7538295
driver: Fix disconnection bug at high cmd rate
...
- Disconnection issue can be triggered by setting high polling rate
(500Hz) and then interactive with gui elements
2024-10-22 18:09:28 +08:00
8f5a294a53
gui: Fix graphs' refresh rate to be 10Hz
...
- Reduce unnecessary CPU usage
2024-10-22 10:57:55 +08:00
87b0e1bf67
gui: rm sIPrefix from PD Current readings
2024-10-21 11:15:15 +08:00
35f66c3516
gui: Change LD, Thermostat Status Display Method
...
- Use combinations of label and stylesheet border to create visual cue for status
2024-10-18 17:33:54 +08:00
dd7e1bbbdd
gui: Adjust y_axis limit range of graphs
2024-10-18 17:33:09 +08:00
a3b38fc6b7
gui: Unify the param tree unit formatting style
2024-10-18 17:33:01 +08:00
f4c761c5ca
pid: Scale PID Parameters with Sampling Rate
...
- Breaking changes
2024-10-17 17:36:06 +08:00
e560d8f1eb
thermostat, gui: Set max v range according to datasheet
2024-10-16 16:21:11 +08:00
0437c6e76e
thermostat, gui: Relax the max settable TEC Current Limit
...
- Improper settings can cause PoE power failure and over heating
- See hardware repo Issue #51
2024-10-16 16:14:58 +08:00
bad21806f8
gui: Add new form for temp adc filter cfg and settable polling rate
...
List of Changes:
1. Get report via polling instead of active report mode
2. Allow user to set a custom report polling rate while settings polling rate is fixed to 10Hz
- it is necessary for pid autotune to function correctly
3. Add a form for configuring temperature adc filter
4. Use two different timer for polling report and settings to optimize performance
Known Issue:
1. CPU utilization increases with the report polling rate as for each report recv-ed, gui renders and plots one frame of the 4 graphs
2024-10-10 17:25:33 +08:00
cb2bc505c9
driver: expose _odr_type for filter cfgs
2024-10-10 17:25:29 +08:00
4f19d2c2be
driver: Expose the upper and lower limit settings for Sinc3WithFineODR Filter Cfg
2024-10-10 15:23:57 +08:00
e8d3858fc9
driver: return whether task queue is full in task_dispatcher()
2024-10-10 15:20:58 +08:00
9bec56ed6c
driver: Add support for GetPollInterval cmd
2024-10-10 15:19:43 +08:00
76f7875e3a
gui: await for hard rst and dfu action
2024-09-11 17:54:23 +08:00
0d64d62fb0
gui: Add pd_mon config form
...
- force user to follow a sequence of steps for safely configuring pd_mon
2024-09-11 17:54:18 +08:00
89a1270c02
driver: send cmd err msg to a pyqt sig
2024-09-11 17:05:38 +08:00
c2e78e6f17
driver: Support ApplyPdParams cmd
...
- Include handling mechanism for "InvalidSettings"b response msg
2024-09-11 17:05:38 +08:00
1111967a7b
gui: add arg for saving log to a file
2024-09-04 17:21:13 +08:00
6d4b1b0574
driver: end_session if ConnClose & Dfu is recv-ed
2024-09-04 16:10:42 +08:00
838592c812
gui: Display hw_rev when connected
2024-09-04 15:46:43 +08:00
e632cbbfdd
driver: use readuntil to get response msg
...
- The driver may recv partial ctrl msg, which causes a json decode error
2024-09-04 15:46:43 +08:00
27bf573010
driver: retrieve hw_rev after conn is established
2024-09-04 15:45:27 +08:00
c267c30b89
driver: add get_hw_rev() fn
2024-09-04 15:39:27 +08:00
6782cda790
Update pid autotuner code
2024-09-04 15:39:27 +08:00
2fe2ef531b
Update example code
2024-09-04 15:39:27 +08:00
f2ad06ecae
gui: patch the GUI code
2024-09-04 15:39:27 +08:00
5166bb7ba8
driver: rm thread use & make it asyncio callable
...
- make all cmds asyncio callable
- control specific cmds can be enqueued to the handler synchronously
2024-09-04 15:39:21 +08:00
3d2294a90c
driver: fix incorrect recv_response behavior
2024-08-27 18:49:13 +08:00
af73ac8127
gui: Add text for LD & Thermostat status
2024-08-07 12:48:12 +08:00
8c8ed12522
gui: Disable param tree compact height
...
- The displayed number was clipped by the pyqtgraph spinbox
2024-08-06 13:01:57 +08:00
572e2dbc5d
gui: update for the new driver code
...
- Default to use active report mode
- Connection will be retried upon abnormal disconnection
- Remove poll every _s and apply btn
2024-08-06 13:01:57 +08:00
