7afb23e8be
runtime: demote dropped and malformed packets msgs to debug
2018-03-07 14:28:21 +01:00
4af7600b2d
Revert "LaneDistributor: try equivalent spread logic"
...
This reverts commit 8b70db5f17
2018-03-07 11:34:51 +00:00
a6d1b030c1
RTIO: use TS counter in the correct CD
...
artiq/m-labs#938
2018-03-07 11:34:42 +00:00
8b70db5f17
LaneDistributor: try equivalent spread logic
2018-03-07 11:34:42 +00:00
2cbd597416
LaneDistributor: style and signal consolidation [NFC]
2018-03-07 11:34:42 +00:00
916197c4d7
siphaser: cleanup
2018-03-07 11:15:44 +08:00
74d1df3ff0
firmware: implement si5324 skew calibration
2018-03-07 10:57:30 +08:00
f7aba6b570
siphaser: fix phase_shift_done CSR
2018-03-07 10:57:30 +08:00
acfd9db185
siphaser: minor cleanup
2018-03-07 10:57:30 +08:00
e6e5236ce2
firmware: fix si5324 select_recovered_clock
2018-03-07 10:57:30 +08:00
7d98864b31
sayma: enable siphaser
2018-03-07 10:57:30 +08:00
c2d2cc2d72
runtime: fix setup_si5324_as_synthesizer
2018-03-07 10:57:30 +08:00
a6e29462a8
sayma: enable multilink DRTIO
2018-03-07 10:57:30 +08:00
c34d00cbc9
drtio: implement Si5324 phaser gateware and partial firmware support
2018-03-07 10:57:30 +08:00
994ceca9ff
sayma_amc: disable slave fpga gateware loading
2018-03-06 17:27:43 +01:00
f4dad87fd9
coredevice: add pcf8574a driver
...
I2C IO expander with 8 quasi-bidirectional pins
2018-03-06 14:27:19 +01:00
62af7fe2ac
Revert "kasli/opticlock: use plain ttls for channels 8-23"
...
This reverts commit bd5c222569eb68d624a5ac1e9f2542f6ee553f83.
No decrease in power consumption or improvement in timing.
2018-03-06 14:27:19 +01:00
fd3cdce59a
kasli/opticlock: use plain ttls for channels 8-23
2018-03-06 14:27:19 +01:00
50298a6104
ttl_serdes_7series: suppress diff_term in outputs
2018-03-06 14:27:19 +01:00
e356150ac4
ttl_simple: support differential io
2018-03-06 14:27:19 +01:00
956098c213
kasli: add second urukul, make clk_sel drive optional
2018-03-06 14:26:27 +01:00
07de7af86a
kasli: make second eem optional in urukul
2018-03-06 14:26:26 +01:00
257bef0d21
slave_fpga: print more info
2018-03-06 14:26:26 +01:00
c25560baec
sed: more LaneDistributor comments
2018-03-06 20:56:35 +08:00
f40255c968
sed: add comments about key points in LaneDistributor
2018-03-06 20:51:09 +08:00
Florent Kermarrec
5b3d6d57e2
drtio/gth: power down rx on restart (seems to make link initialization reliable)
2018-03-06 11:49:28 +01:00
Florent Kermarrec
64b05f07bb
drtio/gth: use parameters from Xilinx transceiver wizard
2018-03-06 11:02:15 +01:00
Florent Kermarrec
45f1e5a70e
drtio/gth: cleanup import
2018-03-06 10:56:07 +01:00
a274af77d5
runtime: fix compilation without DRTIO
2018-03-05 00:43:42 +08:00
432e61bbb4
drtio: add kernel API to check for link status. Closes #941
2018-03-05 00:23:55 +08:00
6aaa8bf9d9
drtio: fix link error generation
2018-03-04 23:20:13 +08:00
d747d74cb3
test: fix test_dma
2018-03-04 23:19:06 +08:00
928d5dc9b3
drtio: raise RTIOLinkError if operation fails due to link lost ( #942 )
2018-03-04 01:02:53 +08:00
ba74013e3e
runtime: add a missing overflow flag reset
2018-03-03 13:16:21 +08:00
abfbadebb5
doc: DMA can also raise RTIOUnderflow
2018-03-03 13:14:34 +08:00
ddcc68cff9
sayma_amc: move bitstream options to migen
...
close #930
2018-03-02 18:13:03 +08:00
5e074f83ac
examples: update kasli sysu
2018-03-02 16:05:12 +08:00
29d42f4648
artiq_flash: add kasli sysu
2018-03-02 15:49:41 +08:00
a9daaad77b
kasli: add SYSU variant and device_db
2018-03-02 14:44:31 +08:00
1c57d27ae2
slave_fpga: use sayma_rtm magic
2018-03-01 18:32:19 +01:00
de63e657b8
kasli/si5324: lock to 100 MHz with highest available bandwidth
2018-03-01 14:49:53 +01:00
abd160d143
slave_fpga: check DONE before loading
2018-03-01 19:53:34 +08:00
a04a36ee36
firmware: move wait for write completion to read()
2018-03-01 11:37:33 +01:00
a6ae08d8b8
firmware/spi: work around cs_polarity semantics
...
The semantics differ between the RTIO and CSR interface.
2018-03-01 11:19:18 +01:00
cc70578f1f
remove old spi RTIO Phy
2018-03-01 11:19:18 +01:00
1329e1a23e
RELEASE_NOTES: add note about spi2 port
2018-03-01 11:19:18 +01:00
ec5b81da55
kc705: switch backplane spi to spi2
2018-03-01 11:19:18 +01:00
6fbe0d8ed8
hmc830: be explicit about SPI mode selection
2018-03-01 11:19:18 +01:00
a7720d05cd
firmware, sayma: port converter_spi to spi2
...
* ksupport/nrt_bus
* port ad9154, hmc830, hmc7043
* port local_spi and drtio_spi
* port kernel_proto libdrtioaux, satman
* change sayma_rtm gateware over
* add spi2 NRTSPIMaster
* remove spi NRTSPIMaster
* change sayma device_db
* change HMC830 to open mode and explicitly sequence open mode
2018-03-01 11:19:18 +01:00
68278e225d
slave_fpga: check for INIT low
2018-03-01 17:28:01 +08:00
