Commit Graph

7407 Commits

Author SHA1 Message Date
Sebastien Bourdeauducq bdfd993818 kasli_tester: add Urukul support 2018-05-18 23:18:03 +08:00
Sebastien Bourdeauducq 72aef5799e kasli/ustc: use TTLOut 2018-05-18 22:55:28 +08:00
Sebastien Bourdeauducq 9a4408a570 add Kasli TTL tester 2018-05-18 22:52:53 +08:00
Sebastien Bourdeauducq b10d3ee4b4 make RTIO clock switch optional and simplify
Kasli no longer has an internal RTIO clock.
Switching clocks dynamically is no longer supported.
2018-05-18 17:41:34 +08:00
Sebastien Bourdeauducq 8a988d0feb kasli: remove leftover debug print 2018-05-18 17:25:23 +08:00
Sebastien Bourdeauducq 37bd0c2566 kasli: add USTC target 2018-05-18 16:15:07 +08:00
Sebastien Bourdeauducq 73f8e61478 kasli_sysu: fix TTL directions in example device_db 2018-05-18 16:13:50 +08:00
Sebastien Bourdeauducq 826a85950b manual: add warning about developing section being for developers 2018-05-18 14:18:36 +08:00
Sebastien Bourdeauducq 6476219296 frontend: fix permissions 2018-05-18 00:10:46 +08:00
Robert Jördens bfff755295 urukul: do IO_RST also when blind 2018-05-17 14:48:49 +00:00
whitequark 5744d97d59 firmware: adjust backtrace addresses correctly. 2018-05-17 08:13:55 +00:00
Sebastien Bourdeauducq d4f074b1e1 firmware: fix Allaki addressing. Closes #993 2018-05-17 16:02:21 +08:00
whitequark 3b61b7c30b compiler: fix tests after 4d06c1d8. 2018-05-16 21:53:53 +00:00
whitequark 31c6c79204 firmware: implement an edge profiler.
It doesn't work extremely well, and the results can be somewhat
confusing, and it needs a libunwind patch, but it's the best I could
do and it seems still useful.
2018-05-16 21:53:53 +00:00
Robert Jördens 99f7672c79 ad53xx: tweak spi readback 2018-05-16 19:08:27 +02:00
Sebastien Bourdeauducq a640041844 firmware: improve ad9154/hmc830/hmc7043 messaging 2018-05-16 23:15:17 +08:00
Sebastien Bourdeauducq fedf7f0c87 firmware/ad9154: cleanup sysref scan and run everytime 2018-05-16 23:01:19 +08:00
Sebastien Bourdeauducq 1364cd2948 firmware/hmc830_7043: break out HMC830 SPI mode selection 2018-05-16 22:46:45 +08:00
Sebastien Bourdeauducq 0aadd3a361 firmware/hmc830_7043: improve messaging 2018-05-16 22:46:45 +08:00
whitequark 4d06c1d84b coredevice.CommKernel: modernize. NFC. 2018-05-16 14:40:14 +00:00
whitequark ca93b94aea firmware: move config requests to management protocol.
They were only in session protocol because of historical reasons.
2018-05-16 14:32:49 +00:00
whitequark a39f8d6634 artiq_devtool: use CommMgmt instead of shelling out to artiq_coremgmt.
(Which no longer exists.)

This also fixes `artiq_devtool hotswap` to work without
an `artiq_devtool connect` running in background.
2018-05-16 14:08:32 +00:00
whitequark d446a3293e frontend: merge core{config,log,boot,debug,profile} into coremgmt. 2018-05-16 14:08:32 +00:00
Sebastien Bourdeauducq b81b20caf8 conda: use h5py 2.8
For some reason, conda installs 2.7 by default, which causes messages such as:
/home/sb/miniconda3/envs/py35/lib/python3.5/site-packages/h5py/__init__.py:36: FutureWarning: Conversion of the second argument of issubdtype from `float` to `np.floating` is deprecated. In future, it will be treated as `np.float64 == np.dtype(float).type`.
2018-05-16 16:25:44 +08:00
Florent Kermarrec f77bcbebb5 serwb/test_serwb_core: fix 2018-05-16 08:34:53 +02:00
Florent Kermarrec 77fc5c599f serwb/test: update 2018-05-15 23:52:58 +02:00
Florent Kermarrec 3873d09692 serwb: rewrite high-speed phys by splitting clocking/tx/rx, scrambling is now always enabled. 2018-05-15 23:52:41 +02:00
Florent Kermarrec f8a9dd930b serwb/genphy: add device parameter (not used here, but this way all the phys share the same parameters), scrambling is also now always enabled. 2018-05-15 23:51:14 +02:00
Florent Kermarrec 2c627cd061 serwb/scrambler: simplify and set scrambler input data to 0 when sink.stb == 0 2018-05-15 23:49:17 +02:00
Florent Kermarrec 7fe49a78d2 firmware/runtime/session: fix compilation when no rtio core 2018-05-15 23:47:47 +02:00
whitequark 8128a814f6 firmware: update dependencies. 2018-05-15 18:17:32 +00:00
whitequark 1b0384c513 firmware: fix satman build. 2018-05-15 16:35:05 +00:00
whitequark 07b713fdad firmware: use upstream log_buffer. 2018-05-15 15:19:20 +00:00
whitequark 9f5b76253c firmware: remove some unnecessary unwraps. 2018-05-15 15:05:19 +00:00
whitequark e5796e26e1 firmware: remove unused #![feature(untagged_unions)]. 2018-05-15 15:05:19 +00:00
whitequark b54926134c firmware: update the signature of #[lang="panic_fmt"]. 2018-05-15 15:05:19 +00:00
Florent Kermarrec c18a73d45f sayma_amc/rtm: use new serwb low-speed phy 2018-05-15 16:40:50 +02:00
Florent Kermarrec 913d1e8e12 serwb: add generic low-speed phy (125Mhz linerate, same phy for ultrascale/7-series) 2018-05-15 16:39:39 +02:00
Florent Kermarrec 520aade8fe serwb/scrambler: cleanup/fix potential bug 2018-05-15 16:30:52 +02:00
whitequark 9347f6e00c firmware: use a dedicated error type in the scheduler.
After this commit, error handling does not normally allocate
(session::Error::{Load,Unexpected} still allocate, but those two
are very rare).

Good riddance to libstd_artiq.
2018-05-15 14:19:44 +00:00
whitequark 479cb9a857 firmware: use dedicated error types for every protocol and thread.
Good riddance to io::Error::Unrecognized.
2018-05-15 13:27:23 +00:00
whitequark 514eab3d39 Update Rust to 1.26.0. 2018-05-15 12:47:51 +00:00
whitequark 26faaad2b7 firmware: remove io::Result<T, E> in favor of Result<T, impl Fail>.
This doesn't yet use impl Fail since std_artiq::io::Error doesn't
impl it.
2018-05-15 08:29:03 +00:00
whitequark 140ca729aa firmware: rename io::Error::{UnexpectedEof→UnexpectedEnd}.
We don't even have files.
2018-05-15 08:27:45 +00:00
whitequark ce0593315b firmware: move {ProtoRead,ProtoWrite} to the root of libio. 2018-05-15 08:16:09 +00:00
whitequark 4416c04ae1 firmware: use the failure crate in libio. 2018-05-15 07:40:13 +00:00
whitequark 9e8f8bb669 firmware: extract io::Cursor into its own file.
Also remove unused io::CursorError.
2018-05-15 06:24:04 +00:00
whitequark a4ab236af3 firmware: simplify some `use`s. 2018-05-14 19:24:14 +00:00
whitequark d93aa13fd6 firmware: use upstream compiler_builtins again.
I've fixed i128 in LLVM, so there is no need in our fork anymore.
2018-05-14 19:11:57 +00:00
whitequark 5ead27f2e1 firmware: eliminate uses of std_artiq::io::{Read,Write} from runtime. 2018-05-14 19:11:57 +00:00