Commit Graph

364 Commits

Author SHA1 Message Date
Robert Jördens d5d17aca9e Merge remote-tracking branch 'm-labs/master' into phaser2
* m-labs/master:
  applets: compatibility with older Qt. Closes #629
  doc: update LLVM configure command (fixes #628).
  runtime: match argument signedness between ARTIQ Python and ksupport.
  runtime: refactor rtio_output_list.
  runtime: use correct ABI when accepting ARTIQ lists.
2016-11-29 14:49:30 +01:00
whitequark 2ec6d43441 doc: update LLVM configure command (fixes #628). 2016-11-26 07:26:06 +00:00
Robert Jördens f7e8961ab0 Merge branch 'master' into phaser
* master: (23 commits)
  RELEASE_NOTES: update
  pipistrello: add some inputs
  Remove last vestiges of nist_qc1.
  Fully drop AD9858 and kc705-nist_qc1 support (closes #576).
  coredevice.dds: reimplement fully in ARTIQ Python.
  compiler: unbreak casts to int32/int64.
  analyses.constness: fix false positive on x[...].
  inferencer: significantly improve the op-assignment diagnostic.
  Fix tests.
  Move mu_to_seconds, seconds_to_mu to Core.
  artiq_devtool: don't crash on invalid utf-8.
  artiq_devtool: detect a race condition during connect.
  llvm_ir_generator: handle no-op coercions.
  conda: use development version of migen/misoc
  Revert accidentally committed code.
  Revert "gateware: increase RTIO FIFO sizes for NIST_CLOCK. Closes #623"
  analyses.invariant_detection: implement (#622).
  Fix whitespace.
  coredevice.dds: work around the round(numpy.float64()) snafu.
  coredevice.dds: update from obsolete int(width=) syntax (fixes #621).
  ...
2016-11-21 17:29:39 +01:00
Sebastien Bourdeauducq 93c310dfa5 pipistrello: add some inputs 2016-11-21 23:43:41 +08:00
whitequark 6aa5d9f6c6 Remove last vestiges of nist_qc1. 2016-11-21 15:36:22 +00:00
whitequark 5e8888d5f3 Fully drop AD9858 and kc705-nist_qc1 support (closes #576). 2016-11-21 15:14:17 +00:00
whitequark 009d396740 Move mu_to_seconds, seconds_to_mu to Core. 2016-11-21 05:37:30 +00:00
whitequark abf2b32b20 coredevice.dds: work around the round(numpy.float64()) snafu. 2016-11-20 09:49:58 +00:00
whitequark 2015fe9de0 doc: update installing_from_source for LLVM 3.9 transitionl 2016-11-18 10:35:36 +00:00
Robert Jördens aedb6747f2 Merge branch 'master' into phaser
* master: (47 commits)
  runtime: disable the Nagle algorithm entirely.
  runtime: buffer RPC send packets.
  runtime: don't print debug messages to the UART.
  runtime: print microsecond timestamps in debug messages.
  artiq_devtool: abort if build failed.
  conda: bump llvmlite-artiq dep.
  conda: bump llvmlite-artiq dep.
  llvm_ir_generator: use !{→unconditionally.}invariant.load metadata.
  artiq_devtool: more robust port forwarding.
  setup: remove paramiko dependency (optional and developer-only)
  artiq_devtool: implement.
  artiq_compile: actually disable attribute writeback.
  conda: use pythonparser 1.0.
  conda: tighten pythonparser dependency (fixes #600).
  doc: clarify kernel_invariant doc (fixes #609).
  compiler: Emit all-kernel_invariant objects as LLVM constants
  conda: update for LLVM 3.9.
  add has_dds, use config flags
  Revert "Revert "Revert "Revert "Update for LLVM 3.9.""""
  Revert "Revert "Revert "Update for LLVM 3.9."""
  ...
2016-11-13 16:54:28 +01:00
whitequark eee8d05398 doc: clarify kernel_invariant doc (fixes #609). 2016-11-09 14:59:57 +00:00
whitequark f102f2d4e6 manual: fix rustc invocation. 2016-11-04 09:11:45 +00:00
Sebastien Bourdeauducq 9d58b4516c manual: Vivado is now default 2016-11-04 11:54:04 +08:00
whitequark 208f3f8568 manual: fix Rust installation instructions. 2016-11-04 03:35:59 +00:00
Sebastien Bourdeauducq 77bc247744 manual: add missing cd 2016-11-04 00:04:26 +08:00
Sebastien Bourdeauducq a252b88a36 manual: fix binutils patch download URL 2016-11-03 23:56:13 +08:00
whitequark cd68577dbc compiler: add support for async RPCs. 2016-10-30 00:57:31 +00:00
Robert Jördens 6d07a16c62 Merge branch 'master' into phaser
* master: (72 commits)
  gateware: extend mailbox to 3 entries.
  master/worker_db: set default value for archive
  master: keep dataset manager consistent when set_dataset is called with contradictory attributes
  master: archive input datasets. Closes #587
  master: ensure same dataset is in broadcast and local when mutating
  scheduler: default submission arguments, closes #577
  pdq2: sync with pdq2
  doc: clarify usage of pause/check_pause, closes #571
  dashboard/datasets: use scientific spinbox and increase number of decimals, closes #572
  gateware/spi: fix import
  runtime: fix use of $(realpath) in Makefile.
  test: fix printf specifier.
  llvm_ir_generator: make sure RPC allocations are not underaligned.
  runtime: use i64 for watchdog timeout, not i32.
  runtime: port ksupport to Rust.
  runtime: remove some redundant libm functions copied inline.
  language: Add "A" (ampere) as well-known unit for arguments
  conda: misoc 0.4 (csr)
  runtime: cap log level at debug.
  runtime: discard unnecessary sections.
  ...
2016-10-28 01:40:11 +02:00
Sebastien Bourdeauducq 69099691f7 doc: clarify usage of pause/check_pause, closes #571 2016-10-17 20:08:15 +08:00
Robert Jördens 18d18b6685 phaser: add sync ttl input for monitoring 2016-10-10 17:13:23 +02:00
Robert Jördens 4d87f0e9e0 phaser: instantiate jesd204b core, wire up 2016-10-06 14:44:22 +02:00
Robert Jördens c54b6e2f3c phaser: add README 2016-10-05 19:24:34 +02:00
Robert Jördens 4a0eaf0f95 phaser: add jesd204b rtio dds
gateware: add jesd204b awg

gateware: copy phaser (df3825a)
dsp/tools: update satadd mixin
phaser: no DDS stubs
dsp: accu fix
phaser: cleanup/reduce

sawg: kernel support and docs

sawg: coredevice api fixes

sawg: example ddb/experiment

phaser: add conda package

examples/phaser: typo

sawg: adapt tests, fix accu stb

sawg: tweak dds parameters

sawg: move/adapt/extend tests

sawg: test phy, refactor

phaser: non-rtio spi

phaser: target cli update

phaser: ad9154-fmc-ebz pins

phaser: reorganize fmc signal naming

phaser: add test mode stubs

phaser: txen is LVTTL

phaser: clk spi xfer test

phaser: spi for ad9154 and ad9516

phaser: spi tweaks

ad9154: add register map from ad9144.xml

ad9516: add register map from ad9517.xml and manual adaptation

ad9154_reg: just generate getter/setter macros as well

ad9154: reg WIP

ad9154: check and fix registers

kc705: single ended rtio_external_clk

use single ended user_sma_clk_n instead of p/n to free up one clock sma

kc705: mirror clk200 at user_sma_clock_p

ad9516_regs.h: fix B_COUNTER_MSB

phase: wire up clocking differently

needs patched misoc

kc705: feed rtio_external_clock directly

kc705: remove rtio_external_clk for phaser

phaser: spi tweaks

ad9516: some startup

ad9516_reg fixes

phaser: setup ad9516 for supposed 500 MHz operation

ad9516: use full duplex spi

ad9154_reg: add CONFIG_REG_2

ad9154_reg: fixes

phaser: write some ad9154 config

ad9154_reg: fixes

ad9154: more init, and human readable setup

ad9154/ad9516: merge spi support

ad9154: status readout

Revert "kc705: remove rtio_external_clk for phaser"

This reverts commit d500288bb44f2bf2eeb0c2f237aa207b0a8b1366.

Revert "kc705: feed rtio_external_clock directly"

This reverts commit 8dc7825519e3e75b7d3d29c9abf10fc6e3a8b4c5.

Revert "phase: wire up clocking differently"

This reverts commit ad9cc450ffa35abb54b0842d56f6cf6c53c6fbcc.

Revert "kc705: mirror clk200 at user_sma_clock_p"

This reverts commit 7f0dffdcdd28e648af84725682f82ec6e5642eba.

Revert "kc705: single ended rtio_external_clk"

This reverts commit a9426d983fbf5c1cb768da8f1da26d9b7335e9cf.

ad9516: 2000 MHz clock

phaser: test clock dist

phaser: test freqs

ad9154: iostandards

phaser: drop clock monitor

phaser: no separate i2c

phaser: drive rtio from refclk, wire up sysref

phaser: ttl channel for sync

ad9154: 4x interp, status, tweaks

phaser: sync/sysref 33V banks

phaser: sync/sysref LVDS_25 inputs are VCCO tolerant

phaser: user input-only ttls

phaser: rtio fully from refclk

ad9154: reg name usage fix

ad9154: check register modifications

Revert "ad9154: check register modifications"

This reverts commit 45121d90edf89f7bd8703503f9f317ad050f9564.

ad9154: fix status code

ad9154: addrinc, recal serdes pll

phaser: coredevice, example tweaks

sawg: missing import

sawg: type fixes

ad9514: move setup functions

ad9154: msb first also decreasing addr

phaser: use sys4x for rtio internal ref

phaser: move init code to main

phaser: naming cleanup

phaser: cleanup pins

phaser: move spi to kernel cpu

phaser: kernel support for ad9154 spi

ad9154: add r/w methods

ad9154: need return annotations

ad9154: r/w methods are kernels

ad9154_reg: portable helpers

phaser: cleanup startup kernel

ad9154: status test

ad9154: prbs test

ad9154: move setup, document

phaser: more documentation
2016-10-05 16:17:50 +02:00
Sebastien Bourdeauducq 82fbd3e9c9 doc: CCBs, applet setup from experiment 2016-09-09 23:25:29 +08:00
Sebastien Bourdeauducq 4ef5eb2644 doc: move VADJ, closes #554 2016-09-09 18:40:58 +08:00
Robert Jördens c38e2cda9d doc/manual: no analytics_id with rtd 2016-08-25 22:21:29 +02:00
Robert Jördens 0a4d4e30ef doc: use sphinx_rtd_theme 2016-08-25 21:52:46 +02:00
Robert Jördens 8753785ef7 doc/rtio: cleanup 2016-08-25 20:42:44 +02:00
Robert Jördens 9f7c33ca84 doc/rtio: make vis coloring consistent 2016-08-25 19:23:06 +02:00
Robert Jördens c2e0e0bd7e doc/rtio: vis RTIOUndeflow tweak 2016-08-25 19:14:31 +02:00
Robert Jördens 8f952fdb98 doc/rtio: vis RTIOUnderflow 2016-08-25 19:06:11 +02:00
Robert Jördens 446dcf2123 doc/rtio: input vis 2016-08-25 18:42:16 +02:00
Robert Jördens eb180da730 doc/rtio: vis: now_mu -> now since not didactically relevant 2016-08-25 18:18:02 +02:00
Robert Jördens aabe53e5fa doc/rtio: handover vis, tweak other vis's 2016-08-25 18:15:48 +02:00
Robert Jördens 7481d4e732 doc/rtio: sync() visualization 2016-08-25 14:51:34 +02:00
Robert Jördens aee0345ed7 doc: ship wavedrom js b/c https 2016-08-25 12:56:36 +02:00
Robert Jördens 60919c2ea7 doc: use wavedrom to visualize stuff 2016-08-25 12:17:05 +02:00
Robert Jördens 552146bd08 doc/rtio: fix description of idle kernel/reset 2016-08-25 12:17:05 +02:00
Robert Jördens 69ea3d3cc0 doc: rtio concepts, closes #451 2016-08-24 17:39:03 +02:00
Robert Jördens df876a4e06 doc: expand/refine getting_started_core 2016-08-23 18:01:34 +02:00
Robert Jördens 5adda1c4c8 doc: cleanup git checkout instructions (see #542) 2016-08-23 18:00:54 +02:00
whitequark 9a0c3dae93 doc: add our binutils patch to installing_from_source. 2016-08-21 19:55:59 +00:00
whitequark cea57e2b46 doc: update installing_from_source. 2016-08-21 02:16:48 +00:00
Sebastien Bourdeauducq 728aff71ae manual: explain how applets work. Closes #536 2016-08-11 19:09:47 +08:00
whitequark 3dc0101459 doc: explain monomorphism of user-defined classes.
Fixes #523.
2016-08-03 23:18:54 +00:00
Robert Jördens ecda94705e doc/management_system: point out check_pause() (closes #522) 2016-07-21 16:42:09 +02:00
Robert Jördens 06bb1a2774 doc/installing_from_source: update/fix (closes #516) 2016-07-21 16:33:51 +02:00
Sebastien Bourdeauducq d2d897a885 manual/getting_started: add examples location info, closes #501 2016-07-07 12:43:10 +08:00
Sebastien Bourdeauducq ea10a2af6e manual/faq: update for inter-experiment seamless handover 2016-07-07 12:42:46 +08:00
Sebastien Bourdeauducq 18eddd00e1 manual: add core.reset() calls 2016-06-29 11:48:33 +08:00