artiq/doc/manual/installing.rst

412 lines
14 KiB
ReStructuredText
Raw Normal View History

2014-09-28 23:25:32 +08:00
Installing ARTIQ
================
The preferred way of installing ARTIQ is through the use of the conda package manager.
The conda package contains pre-built binaries that you can directly flash to your board.
But you can also :ref:`install from sources <install-from-sources>`.
.. note:: Only the linux-64 and linux-32 conda packages contain the FPGA/BIOS/runtime pre-built binaries.
Installing using conda
----------------------
Installing Anaconda or Miniconda
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
* You can either install Anaconda (choose Python 3.5) from https://store.continuum.io/cshop/anaconda/
* Or install the more minimalistic Miniconda (choose Python 3.5) from http://conda.pydata.org/miniconda.html
.. warning::
If you are installing on Windows, choose the Windows 32-bit version regardless of whether you have
a 32-bit or 64-bit Windows.
After installing either Anaconda or Miniconda, open a new terminal and make sure the following command works::
$ conda
If it prints the help of the ``conda`` command, your install is OK.
If not, then make sure your ``$PATH`` environment variable contains the path to anaconda3/bin (or miniconda3/bin)::
$ echo $PATH
2015-10-30 09:18:42 +08:00
/home/.../miniconda3/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin
If your ``$PATH`` misses reference the miniconda3/bin or anaconda3/bin you can fix this by typing::
$ export PATH=$HOME/miniconda3:$PATH
Installing the host side software
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
2015-10-30 09:18:42 +08:00
For this, you need to add our Anaconda repository to your conda configuration::
$ conda config --add channels http://conda.anaconda.org/m-labs/channel/main
2015-08-13 14:47:05 +08:00
$ conda config --add channels http://conda.anaconda.org/m-labs/channel/dev
2015-10-30 09:18:42 +08:00
Then you can install the ARTIQ package, it will pull all the necessary dependencies.
2015-10-30 09:18:42 +08:00
* For the Pipistrello board::
$ ENV=$(date +artiq-%Y-%m-%d); conda create -n $ENV artiq-pipistrello-nist_qc1; \
echo "Created environment $ENV for ARTIQ"
* For the KC705 board with SCSI cables and AD9858 DDS chips::
2015-10-30 09:18:42 +08:00
$ ENV=$(date +artiq-%Y-%m-%d); conda create -n $ENV artiq-kc705-nist_qc1; \
echo "Created environment $ENV for ARTIQ"
* For the KC705 board with the FMC backplane and AD9914 DDS chips::
$ ENV=$(date +artiq-%Y-%m-%d); conda create -n $ENV artiq-kc705-nist_qc2; \
2015-10-30 09:18:42 +08:00
echo "Created environment $ENV for ARTIQ"
This creates a new Conda "environment" (i.e. an isolated installation) and prints its name.
If you ever need to upgrade ARTIQ, it is advised to install it again
in a new environment so that you can roll back to a version that is known to
work correctly.
After this, add the newly created environment to your ``$PATH``. This can be easily
done using the following command::
$ source activate artiq-[date]
You will need to invoke this command in every new shell. When in doubt, you can list
the existing environments using::
$ conda env list
2014-09-28 23:25:32 +08:00
Preparing the core device FPGA board
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
You now need to flash 3 things on the FPGA board:
1. The FPGA bitstream
2. The BIOS
3. The ARTIQ runtime
First you need to :ref:`install xc3sprog <install-xc3sprog>`. Then, you can flash the board:
* For the Pipistrello board::
$ artiq_flash.sh -t pipistrello
* For the KC705 board::
$ artiq_flash.sh
Next step (for KC705) is to flash MAC and IP addresses to the board:
* See :ref:`those instructions <flash-mac-ip-addr>` to flash MAC and IP addresses.
.. _install-from-sources:
Installing from source
----------------------
Preparing the build environment for the core device
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
2014-09-30 18:10:40 +08:00
These steps are required to generate code that can run on the core
device. They are necessary both for building the MiSoC BIOS
and the ARTIQ kernels.
2014-11-17 12:42:37 +08:00
* Create a development directory: ::
$ mkdir ~/artiq-dev
2015-08-10 04:33:00 +08:00
* Clone ARTIQ repository: ::
$ cd ~/artiq-dev
$ git clone --recursive https://github.com/m-labs/artiq
2015-07-26 14:28:11 +08:00
* Install OpenRISC binutils (or1k-linux-...): ::
$ cd ~/artiq-dev
2015-07-26 14:28:11 +08:00
$ wget https://ftp.gnu.org/gnu/binutils/binutils-2.25.1.tar.bz2
$ tar xvf binutils-2.25.1.tar.bz2
$ rm binutils-2.25.1.tar.bz2
2015-08-10 04:33:00 +08:00
$ cd binutils-2.25.1
$ patch -p1 <~/artiq-dev/misc/binutils-2.25.1-or1k-R_PCREL-pcrel_offset.patch
$ mkdir build
$ cd build
2015-07-26 14:28:11 +08:00
$ ../configure --target=or1k-linux --prefix=/usr/local
$ make -j4
$ sudo make install
2015-07-26 14:28:11 +08:00
.. note::
We're using an ``or1k-linux`` target because it is necessary to enable
shared library support in ``ld``, not because Linux is involved.
* Install LLVM and Clang: ::
2014-11-27 22:27:18 +08:00
$ cd ~/artiq-dev
2015-07-26 14:28:11 +08:00
$ git clone https://github.com/openrisc/llvm-or1k
$ cd llvm-or1k/tools
$ git clone https://github.com/openrisc/clang-or1k clang
$ cd ..
2015-06-19 14:10:33 +08:00
$ mkdir build
$ cd build
2015-07-26 14:28:11 +08:00
$ cmake .. -DCMAKE_INSTALL_PREFIX=/usr/local/llvm-or1k -DLLVM_TARGETS_TO_BUILD="OR1K;X86" -DCMAKE_BUILD_TYPE=Rel -DLLVM_ENABLE_ASSERTIONS=ON
$ make -j4
$ sudo make install
2014-09-28 23:25:32 +08:00
2015-07-26 14:28:11 +08:00
.. note::
Compilation of LLVM can take more than 30 min on some machines.
Preparing the core device FPGA board
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
These steps are required to generate bitstream (``.bit``) files, build the MiSoC BIOS and ARTIQ runtime, and flash FPGA boards. If the board is already flashed, you may skip those steps and go directly to `Installing the host-side software`.
* Install the FPGA vendor tools (e.g. Xilinx ISE and/or Vivado):
* Get Xilinx tools from http://www.xilinx.com/support/download/index.htm. ISE can build bitstreams both for boards using the Spartan-6 (Pipistrello) and 7-series devices (KC705), while Vivado supports only boards using 7-series devices.
* The Pipistrello is supported by Webpack, the KC705 is not.
* During the Xilinx toolchain installation, uncheck ``Install cable drivers`` (they are not required as we use better and open source alternatives).
* Install Migen: ::
$ cd ~/artiq-dev
$ git clone https://github.com/m-labs/migen
$ cd migen
$ python3 setup.py develop --user
.. note::
The options ``develop`` and ``--user`` are for setup.py to install Migen in ``~/.local/lib/python3.5``.
.. _install-xc3sprog:
* Install JTAG tools needed to program the Pipistrello and KC705:
::
$ cd ~/artiq-dev
2015-07-28 00:38:20 +08:00
$ svn co http://svn.code.sf.net/p/xc3sprog/code/trunk xc3sprog
2015-06-19 14:10:33 +08:00
$ cd xc3sprog
$ cmake . && make
$ sudo make install
.. note::
It is safe to ignore the message "Could NOT find LIBFTD2XX" (libftd2xx is different from libftdi, and is not required).
.. _install-flash-proxy:
* Install the required flash proxy bitstreams:
The purpose of the flash proxy bitstream is to give programming software fast JTAG access to the flash connected to the FPGA.
* Pipistrello:
::
2014-11-07 08:30:40 +08:00
$ cd ~/artiq-dev
$ wget https://people.phys.ethz.ch/~robertjo/bscan_spi_lx45_csg324.bit
Then copy ``~/artiq-dev/bscan_spi_lx45_csg324.bit`` to ``~/.migen``, ``/usr/local/share/migen`` or ``/usr/share/migen``.
* KC705:
::
2014-11-07 08:30:40 +08:00
$ cd ~/artiq-dev
$ git clone https://github.com/m-labs/bscan_spi_kc705
2015-06-19 14:10:33 +08:00
$ cd bscan_spi_kc705
$ make
2015-06-19 14:10:33 +08:00
Then copy the generated ``bscan_spi_kc705.bit`` to ``~/.migen``, ``/usr/local/share/migen`` or ``/usr/share/migen``.
2014-09-28 23:25:32 +08:00
* Download MiSoC: ::
2014-09-28 23:25:32 +08:00
$ cd ~/artiq-dev
$ git clone --recursive https://github.com/m-labs/misoc
2014-11-17 12:42:37 +08:00
$ export MSCDIR=~/artiq-dev/misoc # append this line to .bashrc
2014-09-28 23:25:32 +08:00
2015-03-21 21:14:40 +08:00
* Download and install ARTIQ: ::
$ cd ~/artiq-dev
$ git clone --recursive https://github.com/m-labs/artiq
2015-03-21 21:14:40 +08:00
$ python3 setup.py develop --user
.. note::
If you have any trouble during ARTIQ setup about ``pygit2`` installation,
refer to the section dealing with
:ref:`installing the host-side software <installing-the-host-side-software>`.
2015-06-15 04:05:06 +08:00
* Build and flash the bitstream and BIOS by running `from the MiSoC top-level directory`:
::
2014-11-07 08:30:40 +08:00
$ cd ~/artiq-dev/misoc
$ export PATH=/usr/local/llvm-or1k/bin:$PATH
.. note:: Make sure that ``/usr/local/llvm-or1k/bin`` is first in your ``PATH``, so that the ``clang`` command you just built is found instead of the system one, if any.
2015-06-15 04:05:06 +08:00
* For Pipistrello::
$ ./make.py -X ~/artiq-dev/artiq/soc -t artiq_pipistrello all
* For KC705::
$ ./make.py -X ~/artiq-dev/artiq/soc -t artiq_kc705 all
2015-03-21 21:14:40 +08:00
* Then, build and flash the ARTIQ runtime: ::
$ cd ~/artiq-dev/artiq/soc/runtime && make runtime.fbi
$ ~/artiq-dev/artiq/artiq/frontend/artiq_flash.sh -t pipistrello -d $PWD -r
.. note:: The `-t` option specifies the board your are targeting. Available options are ``kc705`` and ``pipistrello``.
* Check that the board boots by running a serial terminal program (you may need to press its FPGA reconfiguration button or power-cycle it to load the bitstream that was newly written into the flash): ::
2015-01-21 10:31:50 +08:00
$ make -C ~/artiq-dev/misoc/tools # do only once
2014-11-07 08:30:40 +08:00
$ ~/artiq-dev/misoc/tools/flterm --port /dev/ttyUSB1
MiSoC BIOS http://m-labs.hk
[...]
Booting from flash...
Loading xxxxx bytes from flash...
Executing booted program.
ARTIQ runtime built <date/time>
2014-09-28 23:25:32 +08:00
The communication parameters are 115200 8-N-1.
.. _installing-the-host-side-software:
Installing the host-side software
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
* Install the llvmlite Python bindings: ::
$ cd ~/artiq-dev
$ git clone https://github.com/m-labs/llvmlite
$ git checkout artiq
$ cd llvmlite
$ LLVM_CONFIG=/usr/local/llvm-or1k/bin/llvm-config python3 setup.py install --user
* Install ARTIQ: ::
$ cd ~/artiq-dev
$ git clone --recursive https://github.com/m-labs/artiq # if not already done
$ cd artiq
$ python3 setup.py develop --user
.. note::
If you have any trouble during ARTIQ setup about ``pygit2`` installation,
you can install it by using ``pip``:
On Ubuntu 14.04::
$ pip install --user pygit2==0.19.1
On Ubuntu 14.10::
$ pip install --user pygit2==0.20.3
On Ubuntu 15.04 and 15.10::
$ pip install --user pygit2==0.22.1
The rationale behind this is that pygit2 and libgit2 must have the same
major.minor version numbers.
See http://www.pygit2.org/install.html#version-numbers
* Build the documentation: ::
$ cd ~/artiq-dev/artiq/doc/manual
$ make html
Configuring the core device
---------------------------
This should be done after either installation methods (conda or source).
.. _flash-mac-ip-addr:
* Set the MAC and IP address in the :ref:`core device configuration flash storage <core-device-flash-storage>`:
* You can either set it by generating a flash storage image and then flash it: ::
$ artiq_mkfs flash_storage.img -s mac xx:xx:xx:xx:xx:xx -s ip xx.xx.xx.xx
$ ~/artiq-dev/artiq/frontend/artiq_flash.sh -f flash_storage.img
* Or you can set it via the runtime test mode command line
* Boot the board.
* Quickly run flterm (in ``path/to/misoc/tools``) to access the serial console.
* If you weren't quick enough to see anything in the serial console, press the reset button.
* Wait for "Press 't' to enter test mode..." to appear and hit the ``t`` key.
* Enter the following commands (which will erase the flash storage content).
::
test> fserase
test> fswrite ip xx.xx.xx.xx
test> fswrite mac xx:xx:xx:xx:xx:xx
* Then reboot.
You should see something like this in the serial console: ::
2015-08-10 15:16:52 +08:00
$ ./tools/flterm --port /dev/ttyUSB1
[FLTERM] Starting...
MiSoC BIOS http://m-labs.hk
(c) Copyright 2007-2014 Sebastien Bourdeauducq
[...]
Press 't' to enter test mode...
Entering test mode.
test> fserase
test> fswrite ip 192.168.10.2
test> fswrite mac 11:22:33:44:55:66
.. note:: The reset button of the KC705 board is the "CPU_RST" labeled button.
.. warning:: Both those instructions will result in the flash storage being wiped out. However you can use the test mode to change the IP/MAC without erasing everything if you skip the "fserase" command.
* (optional) Flash the ``idle`` kernel
The ``idle`` kernel is the kernel (some piece of code running on the core device) which the core device runs whenever it is not connected to a PC via ethernet.
This kernel is therefore stored in the :ref:`core device configuration flash storage <core-device-flash-storage>`.
To flash the ``idle`` kernel:
* Compile the ``idle`` experiment:
The ``idle`` experiment's ``run()`` method must be a kernel: it must be decorated with the ``@kernel`` decorator (see :ref:`next topic <connecting-to-the-core-device>` for more information about kernels).
2015-06-04 10:42:37 +08:00
Since the core device is not connected to the PC, RPCs (calling Python code running on the PC from the kernel) are forbidden in the ``idle`` experiment.
::
$ artiq_compile idle.py
* Write it into the core device configuration flash storage: ::
$ artiq_coretool cfg-write -f idle_kernel idle.elf
.. note:: You can find more information about how to use the ``artiq_coretool`` utility on the :ref:`Utilities <core-device-access-tool>` page.
2015-03-21 21:14:40 +08:00
Ubuntu 14.04 specific instructions
----------------------------------
2014-09-28 23:25:32 +08:00
This command installs all the required packages: ::
2014-09-28 23:25:32 +08:00
$ sudo apt-get install build-essential autotools-dev file git patch perl xutils-dev python3-pip texinfo flex bison libmpc-dev python3-serial python3-dateutil python3-prettytable python3-setuptools python3-numpy python3-scipy python3-sphinx python3-h5py python3-dev python-dev subversion cmake libusb-dev libftdi-dev pkg-config libffi-dev libgit2-dev
2014-09-28 23:25:32 +08:00
Note that ARTIQ requires Python 3.5.0 or above.
To set user permissions on the JTAG and serial ports of the Pipistrello, create a ``/etc/udev/rules.d/30-usb-papilio.rules`` file containing the following: ::
2014-11-17 12:45:47 +08:00
SUBSYSTEM=="usb", ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6010", GROUP="dialout"
2014-11-17 12:45:47 +08:00
Then reload ``udev``, add your user to the ``dialout`` group, and log out and log in again: ::
$ sudo invoke-rc.d udev reload
2014-11-17 12:45:47 +08:00
$ sudo adduser <your username> dialout
$ logout