e6372b9766zynq_clocking: Allow ext signal to set cur_clk csr - for example, current_clock csr can be connected to tx_init.donelinuswck2023-11-07 15:40:50 +0800
07044752b6zynq_clocking: add ext_async_rst to AsyncRstSYNCRlinuswck2023-11-06 12:24:44 +0800
4a2d9dc597zynq_clocking: Allow ext signal to set cur_clk csr - for example, current_clock csr can be connected to tx_init.donelinuswck2023-11-07 15:40:50 +0800
6573ecd487add has_rtio_moninj cfg to zc706 satellitemorgan2023-11-02 12:36:22 +0800
d507b6f60fzynq_clocking: add ext_async_rst to AsyncRstSYNCRlinuswck2023-11-06 12:24:44 +0800
0e75694c6bfix zc706 master and standalone compilation warning Co-authored-by: morgan <mc@m-labs.hk> Co-committed-by: morgan <mc@m-labs.hk>morgan2023-11-01 17:45:16 +0800
4a34777b97refactor i2c, io_expander, task under the same cfgmorgan2023-10-25 11:52:04 +0800
136e24f597kasli-soc: Add BUFG to the IBUFGDS for MMCM CLKIN1 - Fix Vivado Compilation Error [DRC REQP-119] - MMCME2_ADV CLKIN1 and CLKIN2 are now driven from the same source type (BUFG)linuswck2023-10-11 10:07:06 +0800
174e645736kasli-soc: Add BUFG to the IBUFGDS for MMCM CLKIN1 - Fix Vivado Compilation Error [DRC REQP-119] - MMCME2_ADV CLKIN1 and CLKIN2 are now driven from the same source type (BUFG)linuswck2023-10-11 10:07:06 +0800
a4d1be00c0Firmware: Add drtio_eem.rs support - Port from Artiq repo - Initialize the drtio_eem on main, rtio_clocking - Driver for eem_transceiverlinuswck2023-10-10 10:47:24 +0800
b15322b6bakasli_soc: Add support for shuttler on gateware - Port from artiq repo - Add EEM_DRTIO gatewarelinuswck2023-10-10 10:41:07 +0800
8fd1306145zynq_clocking: Add sys5x, 208MHz CLK & IDELAYCTRL - Port from artiq repo - Generate sys5x for for EEM Serdes, 208MHz REF Clock for IDELAYCTRL - Add IDELAYCTRL for IDEALYE2 in EEM Serdeslinuswck2023-10-05 11:28:45 +0800
615f2e3d37remove misleading 'Actively' from docs at main.rsmorgan2023-09-06 10:53:26 +0800
00c5ee01b0feature: add SFP0..3 LED indication io_expander.rs: add virtual_led_mapping in IoExpander set SFP LED at .service() kasli_soc.py: add virtual_leds csr device couple virtual_leds.get(i) with rx_ready status runtime main: add async task io_expanders_service() satman main: add io_expander service after link up/downmorgan2023-09-04 16:08:36 +0800
b47152f2c2Fix I2C I/O expander settings for VUSB_PRESENT_N on Kasli-SoC 1.1 Co-authored-by: morgan <mc@m-labs.hk> Co-committed-by: morgan <mc@m-labs.hk>morgan2023-09-04 15:50:45 +0800
dd7cb4be6f- main.rs: remove 'Actively' as set_oe is removedmorgan2023-09-04 14:51:31 +0800
30a8ec8fbd- ioexpander.rs: use hw_rev to store SFP0LED pin - ioexpander.rs: now initialize the expander port direction - main.rs: remove set_oe for io_expander - kasli_sco.py: add hw_rev for rustc-cfg filemorgan2023-09-04 09:52:46 +0800
5597927df9change io_expander not to borrow i2c indefinitelymorgan2023-08-28 16:08:10 +0800
d019021ff5change write_rustc_cfg_file to follow artiq repomorgan2023-08-31 11:54:47 +0800
3d43bc8b15fix compilation error when cfg has has_rtio_moninjmorgan2023-08-31 10:26:55 +0800
2ac7eedec1firmware: fix compilation without virtual LEDs Co-authored-by: morgan <mc@m-labs.hk> Co-committed-by: morgan <mc@m-labs.hk>morgan2023-08-30 15:33:44 +0800