whitequark
e5acdfe3fd
Update manual install instructions.
2015-07-26 09:28:11 +03:00
Yann Sionneau
08eec40861
manual: building LLVM as shared libraries is not recommended on Linux and not supported on Windows
2015-07-15 17:34:06 +02:00
Yann Sionneau
774c66a209
manual: also build LLVM native target (needed for py2llvm test)
2015-07-15 17:32:32 +02:00
Yann Sionneau
fa4f38b871
manual: add missing llvmlite patches
2015-07-15 17:31:57 +02:00
a07f2473b0
manual: add core device moninj port
2015-07-14 20:06:29 +02:00
32d141f5ac
refactor ddb/pdb/rdb
2015-07-13 22:21:32 +02:00
Yann Sionneau
01ca6ebb1c
binstar.org is becoming anaconda.org
2015-07-10 16:30:14 +02:00
34aacd3c5f
complete AD9914 support (no programmable modulus, untested)
2015-07-08 17:22:43 +02:00
Yann Sionneau
3471ef80fd
manual: closes #63 , tell to install xc3sprog before flashing
2015-07-04 14:48:55 +02:00
2881d5f00a
gateware: add RTIO clock generator
2015-07-02 18:20:26 +02:00
e5e035d031
doc/manual: add fire_and_forget
2015-07-01 22:37:12 +02:00
d1c4cf0b78
pipistrello: update rtio channel doc
2015-06-29 12:21:54 -06:00
Yann Sionneau
515aa96819
controllers: use --simulation for simulation
2015-06-29 13:04:01 +02:00
Yann Sionneau
c381102019
manual: fix faq item title about determining pyserial URL by serial number
2015-06-26 18:22:47 +02:00
064ddb48bd
manual: minor fixes
2015-06-23 19:44:02 +00:00
Yann Sionneau
f0dddd9f39
manual: hwgrep is the preferred way of specifying a serial device
2015-06-23 18:14:25 +02:00
Yann Sionneau
7821d0f7c8
manual: explain how to list attached serial devices on windows/linux
2015-06-23 17:05:57 +02:00
Yann Sionneau
d646984471
manual: link cleanup
2015-06-19 23:09:19 +02:00
Yann Sionneau
188a9fb313
manual: add hwgrep example for TDC
2015-06-19 23:03:47 +02:00
Yann Sionneau
3933ff5cba
manual: add missing quotes
2015-06-19 17:44:57 +02:00
Yann Sionneau
b8bb3d8ca7
manual: explain how to select TCube device from serial number
2015-06-19 17:06:50 +02:00
Yann Sionneau
979f3522cb
manual: style
2015-06-19 17:06:14 +02:00
Yann Sionneau
4cdf1c4b81
manual: serial number explanations + udev rule for LDA
2015-06-19 16:41:44 +02:00
Florent Kermarrec
1d052095ee
doc/manual/installing: minor cleanups
2015-06-19 08:10:33 +02:00
Yann Sionneau
77ca8bbf0f
artiq_coreconfig: better arg parsing
2015-06-18 17:07:20 +02:00
Yann Sionneau
250f9e0bc0
manual: update artiq_coreconfig parameter's syntax
2015-06-17 16:46:39 +02:00
Yann Sionneau
a3f0663823
manual: flash proxies are installed via conda, don't tell to install them
2015-06-16 02:32:22 +02:00
Yann Sionneau
a5b34beffa
manual: linux-32 conda pkg contains binaries + use only dev channel
2015-06-14 23:27:36 +02:00
Yann Sionneau
00c4101f12
manual: install flash proxy before flashing bitstream/bios/runtime
2015-06-14 22:23:55 +02:00
Yann Sionneau
b14ca2ecc9
manual: remove reference to ppro board
2015-06-14 22:05:06 +02:00
Yann Sionneau
23116420d7
manual: add instructions to install from conda
2015-06-14 21:02:37 +02:00
398940f5ac
fix doc build
2015-06-06 00:55:48 +08:00
82a2beaa32
style fixes
2015-06-04 10:42:37 +08:00
Yann Sionneau
a84f76bf09
manual: cleanup, removing Gtk GUI related instructions
2015-05-29 17:45:13 +02:00
Yann Sionneau
d5fb50b497
manual: after artiq is installed, frontends can be used without path prefix
...
except non-python frontends like artiq_flash.sh
2015-05-29 17:44:20 +02:00
Yann Sionneau
7ec0bc0470
manual: explain how to compile and flash the idle kernel
2015-05-29 17:38:23 +02:00
Yann Sionneau
4bf7875b87
flash_storage: refactor + unit tests + artiq_coreconfig.py CLI + doc
2015-05-27 18:06:12 +08:00
cff999f259
doc: update mock modules
2015-05-22 22:39:26 +08:00
2adf9d91df
recover_underflow -> break_realtime
2015-05-03 20:45:28 +08:00
65b4b7bb12
coredevice: rename rtio to ttl, integrated in+out driver, loopback on the same pin in tests
2015-05-02 10:35:21 +08:00
109dfab76c
frontend: add artiq_mkfs
2015-04-30 20:03:11 +08:00
e61368e897
doc/manual: list core device port
2015-04-28 00:00:00 +08:00
938e1c2842
Remove UP support.
...
The only advantage of UP is to support the Papilio Pro, but that port is also very limited in other ways and the Pipistrello provides a more reasonable platform that also supports AMP.
On the other hand, RPCs on UP are difficult to implement with the session.c protocol system (without an operating system or coroutines), along with many other minor difficulties and maintainance issues. Planned features such as watchdogs in the core device are also difficult on UP.
2015-04-27 20:43:45 +08:00
Yann Sionneau
9b87933287
pxi6733: add ndsp documentation
2015-04-21 16:19:12 +08:00
Yann Sionneau
e19f8896f0
artiq_rpctool: document numpy availability in RPC call cmd line arguments
2015-04-21 15:57:29 +08:00
Yann Sionneau
5805240df6
manual: update runtime flashing instructions
2015-04-18 00:33:09 +08:00
c1ece33e6d
manual: adapt to LED on RTIO
2015-04-17 10:43:50 +08:00
efd1c24ed7
frontend: add artiq_compile tool to build default experiment
2015-04-07 15:41:32 +08:00
c8039e9dd2
doc: update Papilio Pro info
2015-04-07 00:09:08 +08:00
6973c0f8d5
move patches into misc
2015-04-02 17:06:19 +08:00
