forked from M-Labs/artiq
1
0
Fork 0

manual: update runtime flashing instructions

This commit is contained in:
Yann Sionneau 2015-04-17 11:38:45 +02:00 committed by Sebastien Bourdeauducq
parent af6a8f6d87
commit 5805240df6
1 changed files with 5 additions and 3 deletions

View File

@ -106,10 +106,12 @@ These steps are required to generate bitstream (``.bit``) files, build the MiSoC
* Then, build and flash the ARTIQ runtime: ::
$ cd ~/artiq-dev/artiq/soc/runtime
$ make flash
$ cd ~/artiq-dev/artiq/soc/runtime && make runtime.fbi
$ ~/artiq-dev/artiq/artiq/frontend/artiq_flash.sh -t ppro -d $PWD -r
Check that the board boots by running a serial terminal program (you may need to press its FPGA reconfiguration button or power-cycle it to load the bitstream that was newly written into the flash): ::
.. note:: The `-t` option specifies the board your are targeting. Available options are `ppro` for Papilio Pro, `kc705` for KC705 and `pipistrello` for Pipistrello.
* Check that the board boots by running a serial terminal program (you may need to press its FPGA reconfiguration button or power-cycle it to load the bitstream that was newly written into the flash): ::
$ make -C ~/artiq-dev/misoc/tools # do only once
$ ~/artiq-dev/misoc/tools/flterm --port /dev/ttyUSB1