whitequark
d6f4f1f3bc
artiq_devtool, artiq_pcap: better option naming.
2017-06-26 00:00:05 +00:00
f4624e086a
conda: bump migen
2017-06-25 21:14:52 +02:00
whitequark
6061393bd0
tools: lazily import paramiko.
2017-06-25 07:17:03 +00:00
whitequark
816ec6c52f
artiq_pcap: implement.
2017-06-25 07:04:29 +00:00
whitequark
69fa9b38e0
test: actually run test_embedding.AsyncTest.
2017-06-25 05:28:32 +00:00
whitequark
31b52ff1b3
coredevice: do not desync kernel TCP stream on RPCReturnValueError.
...
And propagate the error upwards instead of trying to squeeze it
through the core device in futility.
2017-06-25 04:47:32 +00:00
whitequark
fdb24ef139
coredevice: truncate overlong exception messages.
...
If we have a really long one (megabytes) then this may exhaust
the heap of the core device and crash it.
2017-06-25 04:39:08 +00:00
whitequark
1fa8be3835
artiq_devtool: don't loop forever if core device dies.
2017-06-25 04:18:45 +00:00
whitequark
f17a6616b2
runtime: ensure management interface buffer can hold log buffer.
...
Otherwise we get weird edge cases where the network stack could try
to append to log buffer while management interface is holding
the log buffer and trying to push it out, and it's just no good.
The serialized log buffer at its maximum length is slightly longer
than 32 KiB, so we just allocate the largest possible TCP buffer
to the management interface to keep it simple.
2017-06-24 17:09:28 +00:00
whitequark
d0f72632e1
language: export TBytes and TByteArray.
2017-06-24 17:03:35 +00:00
whitequark
12357d884e
runtime: update smoltcp.
2017-06-24 16:55:59 +00:00
07f5e99140
dsp/sat_add: works after previous changes
2017-06-22 18:24:22 +02:00
f78d5a87e9
dsp/test: skip and fix sat_add
2017-06-22 18:01:31 +02:00
47928a2c0d
sawg: disable limiter
...
temporary workaround to permit testing other aspects
2017-06-22 17:31:04 +02:00
cd2ac53bc5
dsp/sat_add: make width mandatory
2017-06-22 17:28:39 +02:00
9b940aa876
dsp/sat_add: spell out logic more
2017-06-22 16:55:13 +02:00
d0cf0f2b87
sawg/limiter: make signed signals explicitly
2017-06-22 13:44:36 +02:00
53be34a25f
sawg: clear phase accu in reset
2017-06-22 13:27:49 +02:00
694f8d784c
dsp/tools: unittest sat_add
2017-06-22 11:29:56 +02:00
bd1438d28e
sawg: wrap limits init values
2017-06-22 10:26:29 +02:00
cccd01e81e
sawg: cleanup sat_add logic
2017-06-22 10:26:29 +02:00
5f6e665158
test/sawg: patch delay_mu
2017-06-22 10:26:29 +02:00
570f2cc1ff
dsp/tools/SatAdd: fix reuse of clipped signal
2017-06-22 10:26:29 +02:00
4b3aad2563
sawg: clean up Config
...
* unify I and Q data limiters. there is no conceivable way why they
would be different.
* reorder clr bits to be like consistent
* move the sat add limiter to before the hbf again
2017-06-22 10:26:29 +02:00
f4c6879c76
sawg: special case Config RTIO address
2017-06-22 10:26:29 +02:00
ff0da2c9fc
sawg: stage code for y-data exchange on channels
2017-06-22 10:26:29 +02:00
b6569df02f
dsp/tools: clean up SatAddMixin logic
2017-06-22 10:26:29 +02:00
f369cb97f7
sawg/examples: add a bit more slack
2017-06-22 10:26:29 +02:00
05b57f5110
protocols: increase another asyncio line limit ( #671 )
2017-06-22 09:43:52 +08:00
e3588c9e68
RELEASE_NOTES: 2.4
2017-06-22 00:38:49 +08:00
c2cc29142d
drtio: remove misleading comment from device_db
2017-06-21 18:34:53 +08:00
6262969d46
test: relax test_dma_record_time
2017-06-21 18:33:58 +08:00
64ce85445c
drtio: add remote converter SPI example ( #740 )
2017-06-21 17:08:12 +08:00
74cf074538
drtio: remove sawg_3g from example targets, add converter SPI bus from FMC-EBZ at all times
2017-06-21 17:01:52 +08:00
66dee9d1ad
drtio: send/process I2C and SPI aux packets ( #740 )
2017-06-21 16:50:51 +08:00
f58f16ccd4
drtioaux: add default timeout
2017-06-21 16:23:11 +08:00
7675dd063b
drtioaux: add I2C and SPI packets ( #740 )
2017-06-21 14:07:16 +08:00
c399bec8da
RELEASE_NOTES: pipistrello discontinued by manufacturer
2017-06-20 06:18:34 +02:00
c74de6ae96
phaser: reintroduce test_ad9154_status
2017-06-20 00:49:57 +08:00
8c56a95fa2
spi: add default busno
2017-06-20 00:49:38 +08:00
39ddb66f0f
phaser: add AD9154 SPI access driver to example ddb
2017-06-20 00:49:21 +08:00
470bce6214
coredevice: add AD9154 SPI access driver
2017-06-20 00:48:50 +08:00
a6d06824e7
fix indentation
2017-06-20 00:12:11 +08:00
8f2d85fc5b
add back ad9154_reg.py
2017-06-19 23:45:32 +08:00
c86029bca2
i2c: expose restart as syscall, add structure for I2C-over-DRTIO
2017-06-19 23:44:51 +08:00
268b7d8aaf
typo
2017-06-19 15:42:10 +08:00
09d198c7a1
test: add test for exception on non-existent I2C bus
2017-06-19 15:32:09 +08:00
d08bd58dff
versioneer: cut git hashes consistently ( #753 )
2017-06-19 15:31:48 +08:00
6c6bb67618
libboard: fix compiler warning on not(has_i2c)
2017-06-19 14:57:15 +08:00
5d63489080
i2c,spi: add busno error detection
2017-06-19 14:27:30 +08:00