David Nadlinger
cbfbe24d7a
ttl: Remove broken TTLClockGen.sync
...
The code currently doesn't compile because of a typo in the timestamp
field name. However, tracking event timestamps in software is
problematic anyway (e.g. with DMA, see GitHub #1113 ), so just remove
`sync()` altogether.
2018-11-03 20:33:19 +08:00
7f11411127
RELEASE_NOTES: 3.7
2018-11-03 20:17:28 +08:00
bc4a8157c0
kasli: add tsinghua2
2018-11-01 18:26:37 +08:00
David Nadlinger
91f0d640e2
.github: Match suggested commit message format to established convention
...
This changes the suggested format for commit messages to match the
convention actually used here (no square brackets).
2018-10-25 22:01:14 +01:00
89a961fb00
urukul, ad9912, ad9910: expose CFG RF switch better
...
* conincident setting of multiple switches
* per channel setting
2018-10-24 13:04:46 +02:00
Drew
4e04b6b4dd
[template]: fix 3_question.md template use of ":"
...
Question.md didn't display on ARTIQ new issue page.
Solution: Cannot use ":" in Markdown header
Signed-off-by: Drew Risinger <drewrisinger@users.noreply.github.com>
2018-10-23 23:01:58 +08:00
Drew
761d30d998
[template]: Reorder pull request template
...
PR template wasn't in a logical order, hard for maintainers to read. Reorganized.
Fix directory where docs are built from.
Signed-off-by: Drew Risinger <drewrisinger@users.noreply.github.com>
2018-10-23 23:01:22 +08:00
0b43ec4719
conda: bump migen
2018-10-21 14:33:14 +08:00
48a142ed63
use FutureWarning instead of DeprecationWarning
...
DeprecationWarning is disabled by default and too easy to ignore.
2018-10-21 12:14:51 +08:00
9793632282
enviromnment: rename 'save' in set_dataset to 'archive'. Closes #1171
2018-10-21 12:08:34 +08:00
Marius Weber
029f9d983a
Tpz fixes ( #1178 )
...
* flake8
* fix TPZ constructor after move to asyncio
* Tcube fix docummentation in set_channel_enable_state
2018-10-20 20:49:15 +08:00
Drew
a84c6c6d74
Add issue & pull request templates ( #1163 )
2018-10-20 20:43:19 +08:00
c52a6ca8e9
typo ( #1179 )
2018-10-20 20:40:07 +08:00
Florent Kermarrec
3318925f4e
firmware/liboard_misoc/sdram: use similar loops on read_level_scan and read_level for consistent results
2018-10-16 09:40:39 +02:00
6357a50d33
kasli: update nudt variant
2018-10-15 18:04:57 +08:00
David Nadlinger
e3cfbfed06
master: Add minimal docstring to worker_impl [nfc]
2018-10-14 10:41:32 +08:00
David Nadlinger
64b9a377da
master: Factor RIDCounter out into own module, explain worker_db module [nfc]
...
The docstrings are quite minimal still, but should already
help with navigating the different layers when getting
accustomed with the code base.
RIDCounter was moved to its own module, as it isn't really
related to the other classes (used from master only).
2018-10-14 10:41:32 +08:00
David Nadlinger
4641ddf002
master: Remove unused import [nfc]
2018-10-14 10:41:32 +08:00
661dd00c4c
ad9912: phase offset is 14 bit LSB aligned
...
c.f. sinara-hw/Urukul#15
2018-10-11 15:16:08 +02:00
hartytp
08074d5275
Urukul: add support for hardware v1.3 clocking options
2018-10-10 09:26:35 +02:00
469a66db61
drtio: monitor RTIOClockMultiplier PLL ( #1155 )
...
Debugging by Tom Harty
2018-10-08 14:50:02 +02:00
9cf88329b2
CONTRIBUTING: correct default licensing
2018-10-08 11:20:37 +02:00
hartytp
1a1b454ed9
Urukul: flake8 (NFC)
2018-10-08 10:09:49 +01:00
5de319d76a
bit2bin: don't print string terminator
2018-10-08 10:13:03 +02:00
hartytp
9a509e5070
Zotino: increase delay after register read in init method to avoid underflows
2018-10-06 21:45:17 +08:00
86fe6b0594
kasli: add NUDT variant
2018-10-04 23:20:09 +08:00
a89bd6b684
kasli: swap Urukul EEMs for Tester
...
Updated to Urukul 1.3.
2018-10-04 23:19:31 +08:00
9f96b6bcda
kasli: use 125MHz DRTIO freq for testing
2018-10-04 10:41:01 +08:00
969a305c5a
Merge branch 'master' into switching125
2018-10-04 10:08:42 +08:00
d0ee2c2955
opticlock: external 100 MHz
2018-09-28 19:05:18 +02:00
Drew Risinger
0fef2afccb
make.bat: fix typo
2018-09-27 23:22:19 +08:00
Drew Risinger
fad7128a52
Create Docs Makefile for Windows. #1159
...
Allows building Sphinx documentation on Windows,
(not just Linux as previously).
Closes #1159 .
2018-09-27 23:22:19 +08:00
3b3fddb5a4
kasli: add mitll2
2018-09-27 23:21:52 +08:00
998a468983
examples: add grabber to device databases
2018-09-27 16:09:25 +08:00
c71e442929
documentation improvements
...
Based on PR #1101 by @drewrisinger
2018-09-26 12:12:37 +08:00
b92350b0f6
drtio: monitor RTIOClockMultiplier PLL ( #1155 )
...
Debugging by Tom Harty
2018-09-26 10:52:08 +08:00
53c7a5f2c6
dashboard: fix TTL moninj level display
2018-09-26 10:32:08 +08:00
212892d92f
style
2018-09-26 10:13:33 +08:00
20cddb6a25
tester: handle no available ttl outputs
2018-09-24 09:19:28 +00:00
73f0de7c79
sayma: DRTIO master fixes
2018-09-20 11:15:45 +08:00
1b7f403a4b
drtio: remove remote RTIO PHY resets
2018-09-20 11:10:32 +08:00
53a979e74d
rtio: cleanup resets
2018-09-20 10:58:38 +08:00
251d90c3d5
drtio: clear read request in satellite only after reply has been fully sent
...
Otherwise, chan_sel become invalid before the end of the packet, which
can cause the interconnect to invalidate i_timestamp and i_data which results
in corruption of the end of the packet.
2018-09-20 08:53:45 +08:00
69d060b639
drtio: fix satellite i_status handling
2018-09-19 20:57:21 +08:00
b86b6dcc09
drtio: add switching input test
2018-09-19 17:50:29 +08:00
08be176369
drtio: fix satellite i_status handling
2018-09-19 17:50:18 +08:00
3d965910f7
Revert "drtio: implement per-destination underflow margins"
...
This reverts commit 142c952e3d
2018-09-19 17:05:48 +08:00
142c952e3d
drtio: implement per-destination underflow margins
2018-09-19 17:03:15 +08:00
62642957cd
runtime: fix DRTIO aux channel race condition
2018-09-19 11:16:21 +08:00
David Nadlinger
b482f5feae
firmware: Use larger ARP cache
...
This works around a problematic interaction between ARP cache
expiry in smoltcp (with its 3 seconds timeout before a discovery
request is sent) and our TCP keepalive settings, where the timeout
is reached before the keepalive had a chance to be sent.
GitHub: Closes #1150 .
2018-09-18 14:46:52 +00:00
