zc706/README.md

54 lines
942 B
Markdown

# Build
```shell
nix-shell --command "cargo xbuild --release"
```
# Debug
## Using the Xilinx toolchain
Tested with the ZC706 board.
Run the Xilinx Microprocessor Debugger:
```shell
/opt/Xilinx/14.7/ISE_DS/EDK/bin/lin64/xmd
```
Connect to target (given it is connected and you have permissions):
```tcl
connect arm hw
```
Leave xmd running.
Start the Xilinx version of the GNU debugger with your latest build:
```shell
/opt/Xilinx/14.7/ISE_DS/EDK/gnu/arm/lin/bin/arm-xilinx-linux-gnueabi-gdb zc706
```
Connect the debugger to xmd over TCP on localhost:
```gdb
target remote :1234
```
Proceed using gdb with `load`, `c`
## Using OpenOCD
### Running on the ZC706
```shell
nix-shell --command "cargo xbuild --release"
cd openocd
openocd -f zc706.cfg
```
### Running on the Cora Z7-10
```shell
nix-shell --command "cargo xbuild --release --no-default-features --features=target_cora_z7_10"
cd openocd
openocd -f cora-z7-10.cfg
```