zc706/src/zynq/ddr/mod.rs

use crate::regs::{RegisterR, RegisterW, RegisterRW};
use crate::println;
use super::slcr;
use super::clocks::CpuClocks;

mod regs;

#[cfg(feature = "target_zc706")]
/// Micron MT41J256M8HX-15E: 667 MHz DDR3
const DDR_FREQ: u32 = 666_666_666;

#[cfg(feature = "target_cora_z7_10")]
/// Micron MT41K256M16HA-125: 800 MHz DDR3L
const DDR_FREQ: u32 = 800_000_000;

/// MT41K256M16HA-125
const DCI_FREQ: u32 = 10_000_000;

pub struct DdrRam {
    regs: &'static mut regs::RegisterBlock,
}

impl DdrRam {
    pub fn new() -> Self {
        let clocks = CpuClocks::get();
        Self::clock_setup(&clocks);
        Self::calibrate_iob_impedance(&clocks);
        Self::configure_iob();

        let regs = unsafe { regs::RegisterBlock::new() };
        let mut ddr = DdrRam { regs };
        ddr.reset_ddrc();
        ddr
    }

    /// Zynq-7000 AP SoC Technical Reference Manual:
    /// 10.6.1 DDR Clock Initialization
    fn clock_setup(clocks: &CpuClocks) {
        CpuClocks::enable_ddr(1_066_000_000);

        let ddr3x_clk_divisor = ((clocks.ddr - 1) / DDR_FREQ + 1).min(255) as u8;
        let ddr2x_clk_divisor = 3 * ddr3x_clk_divisor / 2;

        slcr::RegisterBlock::unlocked(|slcr| {
            slcr.ddr_pll_ctrl.write(
                slcr::PllCtrl::zeroed()
            );

            slcr.ddr_clk_ctrl.write(
                slcr::DdrClkCtrl::zeroed()
                    .ddr_2xclkact(true)
                    .ddr_3xclkact(true)
                    .ddr_2xclk_divisor(ddr2x_clk_divisor)
                    .ddr_3xclk_divisor(ddr3x_clk_divisor)
            );
        });
    }

    /// Zynq-7000 AP SoC Technical Reference Manual:
    /// 10.6.2 DDR IOB Impedance Calibration
    fn calibrate_iob_impedance(clocks: &CpuClocks) {
        let divisor0 = (clocks.ddr / DCI_FREQ)
            .max(1).min(63) as u8;
        let divisor1 = (clocks.ddr / DCI_FREQ / u32::from(divisor0))
            .max(1).min(63) as u8;

        slcr::RegisterBlock::unlocked(|slcr| {
            // Step 1.
            slcr.dci_clk_ctrl.write(
                slcr::DciClkCtrl::zeroed()
                    .clkact(true)
                    .divisor0(divisor0)
                    .divisor1(divisor1)
            );

            // Step 2.a.
            slcr.ddriob_dci_ctrl.modify(|_, w|
                w.reset(false)
            );
            slcr.ddriob_dci_ctrl.modify(|_, w|
                w.reset(true)
            );
            // Step 3.b. for DDR3
            slcr.ddriob_dci_ctrl.modify(|_, w|
                w.nref_opt1(0)
                 .nref_opt2(0)
                 .nref_opt4(1)
                 .pref_opt1(0)
                 .pref_opt2(0)
            );
            // Step 2.c.
            slcr.ddriob_dci_ctrl.modify(|_, w|
                w.update_control(false)
            );
            // Step 2.d.
            slcr.ddriob_dci_ctrl.modify(|_, w|
                w.enable(true)
            );
            // Step 2.e.
            while ! slcr.ddriob_dci_status.read().done() {}
        });
    }

    /// Zynq-7000 AP SoC Technical Reference Manual:
    /// 10.6.3 DDR IOB Configuration
    fn configure_iob() {
        slcr::RegisterBlock::unlocked(|slcr| {
            let addr_config = slcr::DdriobConfig::zeroed()
                .output_en(slcr::DdriobOutputEn::Obuf);
            slcr.ddriob_addr0.write(addr_config.clone());
            slcr.ddriob_addr1.write(addr_config);

            let data_config = slcr::DdriobConfig::zeroed()
                .inp_type(slcr::DdriobInputType::VrefDifferential)
                .term_en(true)
                .dci_type(slcr::DdriobDciType::Termination)
                .output_en(slcr::DdriobOutputEn::Obuf);
            slcr.ddriob_data0.write(data_config.clone());
            slcr.ddriob_data1.write(data_config);

            let diff_config = slcr::DdriobConfig::zeroed()
                .inp_type(slcr::DdriobInputType::Differential)
                .term_en(true)
                .dci_type(slcr::DdriobDciType::Termination)
                .output_en(slcr::DdriobOutputEn::Obuf);
            slcr.ddriob_diff0.write(diff_config.clone());
            slcr.ddriob_diff1.write(diff_config);

            slcr.ddriob_clock.write(
                slcr::DdriobConfig::zeroed()
                    .output_en(slcr::DdriobOutputEn::Obuf)
            );

            unsafe {
                // Not documented in Technical Reference Manual
                slcr.ddriob_drive_slew_addr.write(0x0018C61C);
                slcr.ddriob_drive_slew_data.write(0x00F9861C);
                slcr.ddriob_drive_slew_diff.write(0x00F9861C);
                slcr.ddriob_drive_slew_clock.write(0x00F9861C);
            }

            #[cfg(feature = "target_zc706")]
            let vref_sel = slcr::DdriobVrefSel::Vref0_75V;
            #[cfg(feature = "target_cora_z7_10")]
            let vref_sel = slcr::DdriobVrefSel::Vref0_675V;

            // // Enable internal V[REF]
            // slcr.ddriob_ddr_ctrl.modify(|_, w| w
            //         .vref_ext_en_lower(false)
            //         .vref_ext_en_upper(false)
            //         .vref_sel(vref_sel)
            //         .vref_int_en(true)
            // );
            // Enable external V[REF]
            slcr.ddriob_ddr_ctrl.modify(|_, w| w
                    .vref_ext_en_lower(true)
                    .vref_ext_en_upper(true)
                    .vref_sel(vref_sel)
                    .vref_int_en(false)
            );
        });
    }

    /// Reset DDR controller
    fn reset_ddrc(&mut self) {
        self.regs.ddrc_ctrl.modify(|_, w| w
            .soft_rstb(false)
        );
        self.regs.ddrc_ctrl.modify(|_, w| w
            .soft_rstb(true)
            .powerdown_en(false)
            .data_bus_width(regs::DataBusWidth::Width32bit)
        );

        while self.status() == regs::ControllerStatus::Init {}
    }

    pub fn status(&self) -> regs::ControllerStatus {
        self.regs.mode_sts_reg.read().operating_mode()
    }

    // TODO: move into trait
    pub fn ptr(&mut self) -> *mut u8 {
        // 0x0010_0000 as *mut _
        0x0020_0000 as *mut _
    }

    pub fn size(&self) -> usize {
        // #[cfg(feature = "target_zc706")]
        // 1024 * 1024 * 1024
        4 * 1024 * 1024
    }

    pub fn memtest(&mut self) {
        let slice = unsafe {
            core::slice::from_raw_parts_mut(self.ptr(), self.size())
        };
        let patterns: &'static [u8] = &[0, 0xff, 0x55, 0xaa, 0];
        let mut expected = None;
        for (i, pattern) in patterns.iter().enumerate() {
            println!("memtest phase {} (status: {:?})", i, self.status());

            let slice_len = slice.len();
            let mut progress = 0;
            for (j, b) in slice.iter_mut().enumerate() {
                expected.map(|expected| {
                    let read: u8 = *b;
                    if read != expected {
                        println!("{:08X}: expected {:02X}, read {:02X}", b as *mut u8 as usize, expected, read);
                    }
                });
                *b = *pattern;
                // println!("{:08X}", b as *mut u8 as usize);
                let new_progress = 100 * j / slice_len;
                if new_progress > progress {
                    progress = new_progress;
                    println!("{}%", progress);
                }
            }

            expected = Some(*pattern);
        }
    }
}