5b2e7cb7f3
test_ad9910: relax tests
...
* tune_sync_delay: the opposite IO_UPDATE to SYNC_CLK alignment may not be perfectly
mis-aligned
* set_mu_speed: seems to be slower on the buildbot
Signed-off-by: Robert Jördens <rj@quartiq.de>
2019-01-09 18:34:33 +01:00
41a816fd16
ad9910: fix RTIO fine timestamp nudging
...
Previously the TSC was truncated to an even coarse RTIO periods before doing
the setting SPI xfer. Afterwards the the IO update pulse would introduce
at least one but less than two RTIO cycles. Ultimately the RTIO TSC was
truncated again to even. If the SPI xfer takes an odd number of RTIO
periods, then a subsequent xfer would collide.
close #1229
Signed-off-by: Robert Jördens <rj@quartiq.de>
2019-01-09 18:34:20 +01:00
51239ebdb6
ad9910: add more slack in tune_sync_delay
...
close #1235
Signed-off-by: Robert Jördens <rj@quartiq.de>
2019-01-09 18:34:03 +01:00
0303267d7e
satman: wait for CPLL/QPLL lock after setting drtio_transceiver::stable_clkin
2019-01-07 17:09:35 +08:00
0ec01790fe
firmware: fix not(has_spiflash) build
2019-01-05 23:41:50 +08:00
f23d4e2762
update copyright year
2019-01-05 15:03:30 +08:00
6020b9c2f1
manual: update firmware/gateware build/flashing instructions. Closes #1223
2019-01-05 12:39:07 +08:00
Drew
9b081737d4
artiq_flash: change docs from old -m
arg to -V
( #1224 ) ( #1227 )
...
`-m` argument is deprecated. Changed to newer `-V` argument
Closes #1224
Signed-off-by: Drew Risinger <drewrisinger@users.noreply.github.com>
2019-01-05 10:23:47 +08:00
Drew Risinger
17fa5026a5
pyon: fix grammar in module docstring.
...
Signed-off-by: Drew Risinger <drewrisinger@users.noreply.github.com>
2019-01-05 10:23:47 +08:00
Drew
3312a033eb
Docs: instructions to check if in plugdev group
2019-01-05 10:23:47 +08:00
a53065ffc8
manual: move to correct directory for building rust crates. Closes #1222
2018-12-21 10:37:22 +08:00
Drew
8eee5dd414
tdr.py: typo ( #1220 )
2018-12-19 02:47:34 +08:00
371dda4a16
sync_struct: handle TimeoutError as subscriber disconnection. Closes #1215
2018-12-13 07:15:07 +08:00
b1ea02ddf0
eem: name the servo submodule
...
This allows the migen namer to derive names for the ADC return clock
domain in the case of multiple SUServos
close #1201
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-12-11 11:37:36 +01:00
e4ddfb303c
Revert "firmware/ksupport: Update cfg(not(has_rtio))
stub signatures"
...
release-4 does not have DRTIO switching nor the new RTIO CSR interface.
This reverts commit a7d7e91188
.
2018-12-11 16:47:34 +08:00
David Nadlinger
a7d7e91188
firmware/ksupport: Update cfg(not(has_rtio))
stub signatures
...
This fixes up 8caea0e6d3
,
but it is unclear whether anyone even uses a `not(has_rtio)`
configuration at this point.
2018-12-11 09:30:49 +01:00
Kaifeng
34d0f592f1
kasli_tester: add support for windows platform. ( #1204 )
2018-12-05 21:07:55 +08:00
7358262ab3
test_loopback_gate_timing: fix lat_offset
2018-12-02 20:52:54 +08:00
6fdfd6103f
ctlmgr: do not raise exceptions in Controllers.__setitem__. Closes #1198
2018-12-01 18:06:53 +08:00
e3624ca86d
test_loopback_gate_timing: print input timing for debugging
2018-12-01 18:06:22 +08:00
d6cc10b43c
grabber: work around windows numpy int peculiarity (same as a81c12de9
)
2018-11-30 18:41:31 +08:00
35f331f82c
language: fix syscall arg handling
2018-11-30 17:59:42 +08:00
a3c5cdeb86
manual/drtio: update output internal description (SED, 'destination' switching terminology)
2018-11-26 18:36:59 +08:00
cc61ee9139
urukul: work around windows numpy int peculiarity
...
"OverflowError: Python int too large to convert to C long" otherwise
opticlock#74
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-25 16:58:10 +01:00
74371399de
RELEASE_NOTES: remove ARTIQ-5 entry
2018-11-20 18:39:27 +08:00
bf50dcf76d
conda: use misoc release
2018-11-20 17:15:53 +08:00
8f9858be4c
ad9914: remove automatic continuous phase compensation (like Urukul)
2018-11-19 22:00:20 +08:00
22a223bf82
examples/master: clean up remnants of early urukul tests
2018-11-19 21:42:41 +08:00
f5befba5c9
conda: bump misoc (attempt to WA conda problem)
2018-11-19 13:24:28 +08:00
b5cdb1c1e0
try to work around conda problem
2018-11-18 22:32:17 +08:00
a3e0b1c5b4
ad9914,spi2: add warnings about driver state and DMA. Closes #1113
2018-11-17 22:10:20 +08:00
78d4b3a7da
gateware/targets: expose variant lists
...
This allows writing scripts that build all variants.
2018-11-17 22:10:20 +08:00
69e699c7bd
ttl: compensate for SED latency in input gating
...
Closes #1137
2018-11-17 22:10:20 +08:00
3ad68f65c5
urukul: make get_att_mu() not alter state
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-16 14:56:26 +00:00
d1eee7c0ea
ad9910: ensure sync is driven when required
...
close #1194
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-16 13:21:01 +00:00
de9d21ffc8
nix: use fetchFromGitHub for llvmlite
2018-11-16 15:14:20 +08:00
d3483c1d26
kasli: fix SDRAM read delay reset/wrap issue. Closes #1149
2018-11-15 19:40:35 +08:00
494ffca4d3
gui,scan: add CenterScan Scannable variant
...
* parametrized by center/span/step instead of
start/stop/npoints which is more convenient in some applications
* no scan widget support so far
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-15 13:30:43 +08:00
f77a75ab17
test_ad9910: robustify w.r.t. profile synchronization
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-14 08:42:27 +01:00
c3178c2cab
ad9910: profile support
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-14 08:30:28 +01:00
d0cadfeb4b
ad9910: more idiomatic register names
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-14 07:55:01 +01:00
a52d1be140
urukul: expose PROFILE setting
...
* add documentation
* add unittest
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-14 07:43:56 +01:00
2af6edb8f5
eem: fix reset/sync in suservo
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-13 13:00:54 +00:00
whitequark
248c1cf7dc
firmware: fix another TOCTTOU race in sync/async RPC code.
2018-11-13 00:58:20 +08:00
whitequark
68aad3e482
firmware: fix TOCTTOU race in sync/async RPC code.
...
Before this commit, the main loop in session code was laid like:
1. process_kern_queued_rpc
2. process_host_message
3. process_kern_message
If a host message (such as an RPC reply) caused the kernel to exit,
then any async RPCs would not complete, since RunFinished immediately
shuts down the kernel.
Fix this by reordering 1 and 2.
2018-11-13 00:57:09 +08:00
a4997c56cf
ad9910: simplify edge detection logic
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-09 18:54:34 +00:00
e927551827
manual: add highfinesse-net port
2018-11-09 19:39:25 +01:00
14b6b63916
ad9910: rewire io_delay tuning
...
This now reliably locates the SYNC_CLK-IO_UPDATE edge by doing two
scans at different delays between start and stop IO_UPDATE.
It also works well when one delay is very close to the edge.
And it correctly identifies which (start or stop) pulse hit or crossed
the SYNC_CLK edge.
for #1143
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-09 18:38:27 +00:00
fe3d6661eb
manual: kasli device name for zadig on windows
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-09 15:00:59 +01:00
38c6878d49
urukul: mention min/max attenuation
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-09 13:32:05 +01:00