occheung
/
artiq
forked from M-Labs/artiq
1
0
Fork 0
Code Pull Requests Activity
4,836 Commits 14 Branches 35 Tags 23 MiB
Commit Graph

4836 Commits

Author SHA1 Message Date
whitequark abf2b32b20 coredevice.dds: work around the round(numpy.float64()) snafu. 2016-11-20 09:49:58 +00:00
whitequark d7f4397924 coredevice.dds: update from obsolete int(width=) syntax (fixes #621). 2016-11-20 09:49:39 +00:00
David Leibrandt 4a62e09bd4 gateware: increase RTIO FIFO sizes for NIST_CLOCK. Closes #623 2016-11-20 15:22:32 +08:00
Robert Jördens 12e39a64cf sawg: reduce f0 oscillator width to 32 2016-11-19 17:07:07 +01:00
Robert Jördens 04813ea29b sawg: wir up limiting, saturating addition 2016-11-19 16:12:27 +01:00
Robert Jördens e53d0bcd5b dsp: add limits support to SatAddMixin 2016-11-19 16:12:27 +01:00
Robert Jördens 97a54046e8 rtio: auto clear output event data and address 
This is to support channels where variable length
event data is well-defined through zero-padding.
E.g. in the case of `Spline` zero-padding of events naturally
corresponds to low-order knots.

Use timestamp change as trigger. This assumes that writes to the
timestamp register always precede address and data writes.
It does not break support for ganged writes of the same event
timestamp and data/address to multiple channels or
channel-addresses.
 2016-11-19 16:12:27 +01:00
Robert Jördens b714137f76 phaser: 150 MHz rtio/jesd clock 2016-11-19 13:16:30 +01:00
Sebastien Bourdeauducq 02adae7397 drtio: fix link shutdown 2016-11-19 11:01:33 +08:00
Sebastien Bourdeauducq abd1b2a94e drtio: wait longer for remote (bruteforce clock aligner can be slow) 2016-11-19 11:01:09 +08:00
Sebastien Bourdeauducq 381e58434f drtio: handle link restarts at transceiver level 2016-11-19 10:46:56 +08:00
Robert Jördens 0ee47e77ae phaser: fix widths 2016-11-18 17:24:11 +01:00
Robert Jördens bcde26f990 Revert "phaser: cap phy data width to 64 temporarily" 
This reverts commit 342b9e977e.
 2016-11-18 17:08:44 +01:00
Robert Jördens 641f07119f runtime: support rtio data wider than 64 bit 2016-11-18 17:08:33 +01:00
Sebastien Bourdeauducq ba94ed8f4b drtio: check for absence of disparity errors before claiming RX ready 2016-11-19 00:05:59 +08:00
Robert Jördens 342b9e977e phaser: cap phy data width to 64 temporarily 2016-11-18 15:46:59 +01:00
Robert Jördens 7664b226f2 phaser/conda: bump jesd204b 2016-11-18 15:34:03 +01:00
Robert Jördens 14ddcd2e30 Revert "dsp/Delay: reset_less" 
for now

This reverts commit 98193d6fa1.
 2016-11-18 15:25:42 +01:00
Robert Jördens d678bb3fb6 phaser: update sawg tests 2016-11-18 15:23:56 +01:00
whitequark 2015fe9de0 doc: update installing_from_source for LLVM 3.9 transitionl 2016-11-18 10:35:36 +00:00
Sebastien Bourdeauducq 4d07974a34 drtio: reset link from CPU 2016-11-18 17:45:33 +08:00
Sebastien Bourdeauducq f040e27041 drtio: add timeout on FIFO get space request 2016-11-18 17:44:48 +08:00
whitequark c7844d5223 runtime: use proper format for git commit. 
Fixes #620.
 2016-11-17 15:20:21 +00:00
Sebastien Bourdeauducq bb047aabe9 drtio: simpler link layer 2016-11-17 22:32:39 +08:00
Robert Jördens 51f23feeac dsp: implement sawg features 2016-11-17 03:20:37 +01:00
Robert Jördens 98193d6fa1 dsp/Delay: reset_less 2016-11-17 02:36:29 +01:00
Robert Jördens 424a1f8f4e dsp: move test tools 2016-11-16 13:39:19 +01:00
Sebastien Bourdeauducq 09363e1da8 drtio: aux controller unittest 2016-11-16 19:45:28 +08:00
Sebastien Bourdeauducq 140bb0ecee drtio: aux controller fixes 2016-11-16 19:44:03 +08:00
Sebastien Bourdeauducq 7fa9a4efc3 drtio: aux controller unittest WIP 2016-11-15 12:02:53 +08:00
Sebastien Bourdeauducq 6c9965b444 drtio: aux controller fixes 2016-11-15 12:02:41 +08:00
Sebastien Bourdeauducq e1394db861 drtio: aux controller minor fixes 2016-11-14 17:26:30 +08:00
Sebastien Bourdeauducq 84bd962ed5 drtio: integrate aux controller 2016-11-14 17:20:47 +08:00
Sebastien Bourdeauducq a4d92716da drtio: fix aux receiver, add aux transmitter 2016-11-14 17:18:54 +08:00
Robert Jördens b9ce2bb1f0 Merge branch 'phaser' into phaser2 
* phaser: (127 commits)
  phaser: use misoc cordic
  phaser: fix DDS dummy cfg
  runtime: disable the Nagle algorithm entirely.
  runtime: buffer RPC send packets.
  runtime: don't print debug messages to the UART.
  runtime: print microsecond timestamps in debug messages.
  artiq_devtool: abort if build failed.
  conda: bump llvmlite-artiq dep.
  conda: bump llvmlite-artiq dep.
  llvm_ir_generator: use !{→unconditionally.}invariant.load metadata.
  artiq_devtool: more robust port forwarding.
  setup: remove paramiko dependency (optional and developer-only)
  artiq_devtool: implement.
  artiq_compile: actually disable attribute writeback.
  conda: use pythonparser 1.0.
  conda: tighten pythonparser dependency (fixes #600).
  doc: clarify kernel_invariant doc (fixes #609).
  compiler: Emit all-kernel_invariant objects as LLVM constants
  conda: update for LLVM 3.9.
  add has_dds, use config flags
  ...
 2016-11-13 17:30:37 +01:00
Robert Jördens 70a70320bd phaser: use misoc cordic 2016-11-13 17:29:38 +01:00
Robert Jördens 2e482505c6 phaser: fix DDS dummy cfg 2016-11-13 17:08:59 +01:00
Sebastien Bourdeauducq f2f131e0fb drtio: add aux receiver (untested) 2016-11-14 00:04:53 +08:00
Robert Jördens aedb6747f2 Merge branch 'master' into phaser 
* master: (47 commits)
  runtime: disable the Nagle algorithm entirely.
  runtime: buffer RPC send packets.
  runtime: don't print debug messages to the UART.
  runtime: print microsecond timestamps in debug messages.
  artiq_devtool: abort if build failed.
  conda: bump llvmlite-artiq dep.
  conda: bump llvmlite-artiq dep.
  llvm_ir_generator: use !{→unconditionally.}invariant.load metadata.
  artiq_devtool: more robust port forwarding.
  setup: remove paramiko dependency (optional and developer-only)
  artiq_devtool: implement.
  artiq_compile: actually disable attribute writeback.
  conda: use pythonparser 1.0.
  conda: tighten pythonparser dependency (fixes #600).
  doc: clarify kernel_invariant doc (fixes #609).
  compiler: Emit all-kernel_invariant objects as LLVM constants
  conda: update for LLVM 3.9.
  add has_dds, use config flags
  Revert "Revert "Revert "Revert "Update for LLVM 3.9.""""
  Revert "Revert "Revert "Update for LLVM 3.9."""
  ...
 2016-11-13 16:54:28 +01:00
whitequark 18c394976e runtime: disable the Nagle algorithm entirely. 
See also commit feed91d; that commit fixed the test_rpc_timing test,
but caused frequent hangs elsewhere, which were also caused by buggy
Nagle implementation. Just disable this entirely, as with our
explicit buffering it provides no benefit anyway.
 2016-11-13 00:33:24 +00:00
whitequark feed91d8b2 runtime: buffer RPC send packets. 
This brings mean RPC time from ~45ms to ~2ms.

The cause of the slowness without buffering is, primarily, that lwip
is severely pessimized by small writes, whether with Nagle on or off.
(In fact, disabling Nagle makes it function *better* on many small
writes, which begs the question of what's the point of having Nagle
there in the first place.) In practical terms, the slowness appears
only when writing a 4-byte buffer (the synchronization segment);
writing buffers of other sizes does not trigger the problem.

This all is extremely confusing and the fix is partly palliative,
but since it seems to work reliably and we're migrating off lwip
I think it is unwise to spend any more time debugging this.
 2016-11-12 23:06:33 +00:00
whitequark 3ce1826891 runtime: don't print debug messages to the UART. 
It takes ~4ms to print an empty log line because of how slow
the UART is. This makes the log timestamps useless for debugging
performance problems.

After this commit, it takes ~75us to print an empty log line instead,
which pessimizes test_rpc_timing by less than 2ms with tracing
enabled.
 2016-11-12 20:26:32 +00:00
whitequark acc5e53b32 runtime: print microsecond timestamps in debug messages. 2016-11-12 20:26:32 +00:00
whitequark dca3fb5c96 artiq_devtool: abort if build failed. 2016-11-12 20:26:32 +00:00
whitequark 7c2b1155ef conda: bump llvmlite-artiq dep. 2016-11-12 13:58:00 +00:00
whitequark 5eb940deb7 conda: bump llvmlite-artiq dep. 2016-11-12 04:09:34 +00:00
whitequark d3ee858d16 llvm_ir_generator: use !{→unconditionally.}invariant.load metadata. 
This helps LICM, among other things.
 2016-11-12 04:08:58 +00:00
whitequark 8b6418c604 artiq_devtool: more robust port forwarding. 2016-11-11 15:22:07 +00:00
Sebastien Bourdeauducq fbc2420443 setup: remove paramiko dependency (optional and developer-only) 2016-11-11 11:05:37 +08:00
whitequark 3b6cbb1f06 artiq_devtool: implement. 2016-11-10 20:25:15 +00:00