b6569df02f
dsp/tools: clean up SatAddMixin logic
2017-06-22 10:26:29 +02:00
f369cb97f7
sawg/examples: add a bit more slack
2017-06-22 10:26:29 +02:00
05b57f5110
protocols: increase another asyncio line limit ( #671 )
2017-06-22 09:43:52 +08:00
e3588c9e68
RELEASE_NOTES: 2.4
2017-06-22 00:38:49 +08:00
c2cc29142d
drtio: remove misleading comment from device_db
2017-06-21 18:34:53 +08:00
6262969d46
test: relax test_dma_record_time
2017-06-21 18:33:58 +08:00
64ce85445c
drtio: add remote converter SPI example ( #740 )
2017-06-21 17:08:12 +08:00
74cf074538
drtio: remove sawg_3g from example targets, add converter SPI bus from FMC-EBZ at all times
2017-06-21 17:01:52 +08:00
66dee9d1ad
drtio: send/process I2C and SPI aux packets ( #740 )
2017-06-21 16:50:51 +08:00
f58f16ccd4
drtioaux: add default timeout
2017-06-21 16:23:11 +08:00
7675dd063b
drtioaux: add I2C and SPI packets ( #740 )
2017-06-21 14:07:16 +08:00
c399bec8da
RELEASE_NOTES: pipistrello discontinued by manufacturer
2017-06-20 06:18:34 +02:00
c74de6ae96
phaser: reintroduce test_ad9154_status
2017-06-20 00:49:57 +08:00
8c56a95fa2
spi: add default busno
2017-06-20 00:49:38 +08:00
39ddb66f0f
phaser: add AD9154 SPI access driver to example ddb
2017-06-20 00:49:21 +08:00
470bce6214
coredevice: add AD9154 SPI access driver
2017-06-20 00:48:50 +08:00
a6d06824e7
fix indentation
2017-06-20 00:12:11 +08:00
8f2d85fc5b
add back ad9154_reg.py
2017-06-19 23:45:32 +08:00
c86029bca2
i2c: expose restart as syscall, add structure for I2C-over-DRTIO
2017-06-19 23:44:51 +08:00
268b7d8aaf
typo
2017-06-19 15:42:10 +08:00
09d198c7a1
test: add test for exception on non-existent I2C bus
2017-06-19 15:32:09 +08:00
d08bd58dff
versioneer: cut git hashes consistently ( #753 )
2017-06-19 15:31:48 +08:00
6c6bb67618
libboard: fix compiler warning on not(has_i2c)
2017-06-19 14:57:15 +08:00
5d63489080
i2c,spi: add busno error detection
2017-06-19 14:27:30 +08:00
0d8067256b
rtio: refactor RelaxedAsyncResetSynchronizer
2017-06-18 14:37:08 +02:00
8399f8893d
add kernel access to non-realtime SPI buses ( #740 )
2017-06-18 12:45:07 +08:00
424b2bfbd8
rtio: describe rio and rio_phy domains a bit more
2017-06-17 12:21:07 +02:00
219dfd8984
rtio: add one register level for rio and rio_phy resets
...
* This should give Vivado some wiggle room during PnR.
* It needs three new clock domains which is ugly. But since
AsyncResetSynchronizer can only drive clock domains resets directly
there seems to be no other way to add one register level currently.
2017-06-17 12:17:48 +02:00
8fea361412
firmware: always use 8 characters to abbreviate git commit hashes
2017-06-17 14:43:50 +08:00
e19bfd4781
test_sawg_fe: add ref_multiplier to simulated core
2017-06-16 19:45:24 +02:00
b5772f478a
sawg: add channel reset ( closes #751 )
2017-06-16 19:31:57 +02:00
2a76034fbc
cri: add note about clearing of o_data
2017-06-16 19:06:00 +02:00
10fb6c6216
conda: set ignore_prefix_files on all board packages
2017-06-15 16:25:52 +08:00
5e94810e84
Revert "Revert "conda: use new noarch system for board packages as well""
...
This reverts commit 832fb139a0
.
2017-06-15 16:10:58 +08:00
832fb139a0
Revert "conda: use new noarch system for board packages as well"
...
Never missing an opportunity to be awful, conda helps itself with the .fbi files and merrily patches the strings inside them that contain paths resembling the conda build folder, resulting of course in corrupption and CRC errors.
This reverts commit c856b22579
.
2017-06-15 16:00:00 +08:00
fecc42fd0c
sawg/phaser: expand documentation ( closes #750 )
2017-06-14 11:49:52 +02:00
ed2b27fed2
conda: fix pythonparser dependency
2017-06-14 12:39:29 +08:00
whitequark
53f7d145a4
conda: update pythonparser dependency.
2017-06-14 03:35:54 +00:00
858c1be381
sawg: expand documentation
2017-06-13 18:51:48 +02:00
3f37870e25
sawg: register pre-hbf adder
2017-06-13 18:15:44 +02:00
e229edd5d5
sawg: add register after hbf for timing
2017-06-12 23:08:27 +02:00
315338fca9
test/sawg: test HBF overshoot, fix sim patching
2017-06-12 20:35:47 +02:00
9a8a7b9102
sawg: handle clipping interpolator
...
* give 1 bit headroom to interpolator to handle overshoot
* fix Config limiter widths (NFC)
* move clipper to behind the HBF to correctly shield DUC
This leaves a factor of two headroom for the sum of the following
effects:
* HBF overshoot (~15 % of the step)
* A1/A2 DDS sum
While this is technically not sufficient and can still lead to
overflows, it is unlikely that one would trigger those. It would require
doing large amplitude A1, large amplitude A2 and additionally doing
amplitude/phase jumps that would overshoot the HBF. No sane person would
try that, right?
closes #743
2017-06-12 20:33:54 +02:00
1fb3995ffc
Revert "fir/ParallelHBFUpsampler: add headroom (gain=2)"
...
This reverts commit 6ac9d0c41e
.
Overshooting behavior must to be handled outside the FIR.
2017-06-12 20:07:25 +02:00
332bcc7f3b
fir: check widths
2017-06-12 20:07:23 +02:00
39a1dcbb3d
test/fir: look at overshoot behavior
2017-06-12 20:06:07 +02:00
6ac9d0c41e
fir/ParallelHBFUpsampler: add headroom (gain=2)
...
This addresses part of #743
2017-06-12 18:59:45 +02:00
566ff73dff
pdq: unify spi-PDQ and usb-PDQ protocols
2017-06-10 15:03:25 +02:00
6c54c0f834
sawg: update example
2017-06-10 11:52:48 +02:00
d8aee931ba
sawg: extend phase mode docs
2017-06-09 12:26:49 +02:00