forked from M-Labs/zynq-rs
1
0
Fork 0
zynq-rs/libboard_zynq/src/i2c/mod.rs

232 lines
6.2 KiB
Rust

//! I2C Bit-banging Controller
mod regs;
pub mod eeprom;
use super::slcr;
use super::time::Microseconds;
use embedded_hal::timer::CountDown;
use libregister::{RegisterR, RegisterRW, RegisterW};
pub struct I2c {
regs: regs::RegisterBlock,
count_down: super::timer::global::CountDown<Microseconds>
}
impl I2c {
#[cfg(any(feature = "target_zc706", feature = "target_kasli_soc"))]
pub fn i2c0() -> Self {
// Route I2C 0 SCL / SDA Signals to MIO Pins 50 / 51
slcr::RegisterBlock::unlocked(|slcr| {
// SCL
slcr.mio_pin_50.write(
slcr::MioPin50::zeroed()
.l3_sel(0b000) // as GPIO 50
.io_type(slcr::IoBufferType::Lvcmos18)
.pullup(true)
.disable_rcvr(true)
);
// SDA
slcr.mio_pin_51.write(
slcr::MioPin51::zeroed()
.l3_sel(0b000) // as GPIO 51
.io_type(slcr::IoBufferType::Lvcmos18)
.pullup(true)
.disable_rcvr(true)
);
// Reset
slcr.gpio_rst_ctrl.reset_gpio();
});
Self::i2c_common(0xFFFF - 0x000C)
}
fn i2c_common(gpio_output_mask: u16) -> Self {
// Setup register block
let self_ = Self {
regs: regs::RegisterBlock::i2c(),
count_down: unsafe { super::timer::GlobalTimer::get() }.countdown()
};
// Setup GPIO output mask
self_.regs.gpio_output_mask.modify(|_, w| {
w.mask(gpio_output_mask)
});
// Setup GPIO driver direction
self_.regs.gpio_direction.modify(|_, w| {
w.scl(true).sda(true)
});
self_
}
/// Delay for I2C operations, simple wrapper for nb.
fn delay_us(&mut self, us: u64) {
self.count_down.start(Microseconds(us));
nb::block!(self.count_down.wait()).unwrap();
}
fn half_period(&mut self) { self.delay_us(100) }
fn sda_i(&mut self) -> bool {
self.regs.gpio_input.read().sda()
}
fn scl_i(&mut self) -> bool {
self.regs.gpio_input.read().scl()
}
fn sda_oe(&mut self, oe: bool) {
self.regs.gpio_output_enable.modify(|_, w| {
w.sda(oe)
})
}
fn sda_o(&mut self, o: bool) {
self.regs.gpio_output_mask.modify(|_, w| {
w.sda_o(o)
})
}
fn scl_oe(&mut self, oe: bool) {
self.regs.gpio_output_enable.modify(|_, w| {
w.scl(oe)
})
}
fn scl_o(&mut self, o: bool) {
self.regs.gpio_output_mask.modify(|_, w| {
w.scl_o(o)
})
}
pub fn init(&mut self) -> Result<(), &'static str> {
self.scl_oe(false);
self.sda_oe(false);
self.scl_o(false);
self.sda_o(false);
// Check the I2C bus is ready
self.half_period();
self.half_period();
if !self.sda_i() {
// Try toggling SCL a few times
for _bit in 0..8 {
self.scl_oe(true);
self.half_period();
self.scl_oe(false);
self.half_period();
}
}
if !self.sda_i() {
return Err("SDA is stuck low and doesn't get unstuck");
}
if !self.scl_i() {
return Err("SCL is stuck low and doesn't get unstuck");
}
// postcondition: SCL and SDA high
Ok(())
}
pub fn start(&mut self) -> Result<(), &'static str> {
// precondition: SCL and SDA high
if !self.scl_i() {
return Err("SCL is stuck low and doesn't get unstuck");
}
if !self.sda_i() {
return Err("SDA arbitration lost");
}
self.sda_oe(true);
self.half_period();
self.scl_oe(true);
// postcondition: SCL and SDA low
Ok(())
}
pub fn restart(&mut self) -> Result<(), &'static str> {
// precondition SCL and SDA low
self.sda_oe(false);
self.half_period();
self.scl_oe(false);
self.half_period();
self.start()?;
// postcondition: SCL and SDA low
Ok(())
}
pub fn stop(&mut self) -> Result<(), &'static str> {
// precondition: SCL and SDA low
self.half_period();
self.scl_oe(false);
self.half_period();
self.sda_oe(false);
self.half_period();
if !self.sda_i() {
return Err("SDA arbitration lost");
}
// postcondition: SCL and SDA high
Ok(())
}
pub fn write(&mut self, data: u8) -> Result<bool, &'static str> {
// precondition: SCL and SDA low
// MSB first
for bit in (0..8).rev() {
self.sda_oe(data & (1 << bit) == 0);
self.half_period();
self.scl_oe(false);
self.half_period();
self.scl_oe(true);
}
self.sda_oe(false);
self.half_period();
self.scl_oe(false);
self.half_period();
// Read ack/nack
let ack = !self.sda_i();
self.scl_oe(true);
self.sda_oe(true);
// postcondition: SCL and SDA low
Ok(ack)
}
pub fn read(&mut self, ack: bool) -> Result<u8, &'static str> {
// precondition: SCL and SDA low
self.sda_oe(false);
let mut data: u8 = 0;
// MSB first
for bit in (0..8).rev() {
self.half_period();
self.scl_oe(false);
self.half_period();
if self.sda_i() { data |= 1 << bit }
self.scl_oe(true);
}
// Send ack/nack
self.sda_oe(ack);
self.half_period();
self.scl_oe(false);
self.half_period();
self.scl_oe(true);
self.sda_oe(true);
// postcondition: SCL and SDA low
Ok(data)
}
pub fn pca9548_select(&mut self, address: u8, channels: u8) -> Result<(), &'static str> {
self.start()?;
if !self.write(address << 1)? {
return Err("PCA9548 failed to ack write address")
}
if !self.write(channels)? {
return Err("PCA9548 failed to ack control word")
}
self.stop()?;
Ok(())
}
}