kirdy-firmware/src/main.rs

#![cfg_attr(not(test), no_main)]
#![cfg_attr(not(test), no_std)]

use cortex_m_rt::entry;
use log::{info, debug};
use stm32f4xx_hal::pac::{CorePeripherals, Peripherals};
mod device;
mod laser_diode;
mod thermostat;
mod net;

use device::{boot::bootup, log_setup, sys_timer};
use uom::fmt::DisplayStyle::Abbreviation;
use uom::si::electric_potential::volt;
use uom::si::electric_current::{ampere, milliampere};
use uom::si::thermodynamic_temperature::degree_celsius;
use uom::si::power::milliwatt;
use uom::si::f64::{ElectricPotential, ElectricCurrent, Power, ThermodynamicTemperature};
use serde::{Serialize, Deserialize};

use stm32f4xx_hal::pac::SCB;
// If RTT is used, print panic info through RTT
#[cfg(all(feature = "RTT", not(test)))]
use {core::panic::PanicInfo, rtt_target::rprintln};
#[cfg(all(feature = "RTT", not(test)))]
#[panic_handler]
fn panic(info: &PanicInfo) -> ! {
    rprintln!("{}", info);
    loop {}
}
// Otherwise use panic halt
#[cfg(all(not(feature = "RTT"), not(test)))]
use panic_halt as _;

static mut ETH_DATA_BUFFER: [u8; 1024] = [0; 1024];

#[cfg(not(test))]
#[entry]
fn main() -> ! {
    log_setup::init_log();
    info!("Kirdy init");

    let core_perif = CorePeripherals::take().unwrap();
    let perif = Peripherals::take().unwrap();

    let (mut wd, mut _flash_store, mut laser, mut thermostat,) = bootup(core_perif, perif);

    // Demo Fns for reading and writing stm32 Internal Flash
    /* 
    let key = "test";
    info!("Read the Flash Content Stored");
    match flash_store.read(key).unwrap() {
        Some(val) => {info!("Flash Valued Read: {:?}", val)}
        _ => {info!("Key does not match")}
    }
    
    info!("Erasing Flash");
    flash_store.erase().unwrap();
    match flash_store.read(key).unwrap() {
        Some(val) => {info!("Flash Valued Read: {:?}", val)}
        _ => {info!("Key does not match")}
    }

    info!("Writing Flash");
    let buf = [1, 2, 3, 4];
    flash_store.write(key, &buf).unwrap();

    info!("Reading Flash");
    match flash_store.read(key).unwrap() {
        Some(val) => {info!("Val: {:?}", val)}
        _ => {info!("Key does not match")}
    };
    */

    // https://github.com/iliekturtles/uom/blob/master/examples/si.rs
    let volt_fmt = ElectricPotential::format_args(volt, Abbreviation);
    let amp_fmt = ElectricCurrent::format_args(ampere, Abbreviation);
    let milli_amp_fmt = ElectricCurrent::format_args(milliampere, Abbreviation);
    let milli_watt_fmt = Power::format_args(milliwatt, Abbreviation);

    let mut should_reset = false;

    loop {
        wd.feed();

        if !should_reset {
            let mut eth_is_pending = false;
        
            if thermostat.poll_adc_and_update_pid() {
                info!("curr_dac_vfb: {:?}", volt_fmt.with(thermostat.get_dac_vfb()));
                info!("curr_vref: {:?}", volt_fmt.with(thermostat.get_vref()));
                info!("curr_tec_i: {:?}", amp_fmt.with(thermostat.get_tec_i()));
                info!("curr_tec_v: {:?}", volt_fmt.with(thermostat.get_tec_v()));

                info!("curr_ld_drive_cuurent: {:?}", milli_amp_fmt.with(laser.get_ld_drive_current()));
                
                info!("pd_mon_v: {:?}", volt_fmt.with(laser.pd_mon_status().v));
                info!("power_excursion: {:?}", laser.pd_mon_status().pwr_excursion);
                
                info!("Termination Status: {:?}", laser.get_term_status());
            }
            
            if net::net::eth_is_socket_active() {
                cortex_m::interrupt::free(|cs| 
                    {
                    eth_is_pending = net::net::is_pending(cs);
                    }
                );

                if eth_is_pending {
                    unsafe{
                        cortex_m::interrupt::free(|cs| {
                            net::net::clear_pending(cs);
                        });
                        let bytes = net::net::eth_recv(&mut ETH_DATA_BUFFER);
                        debug!("Number of bytes recv: {:?}", bytes);
                        (laser, thermostat, should_reset) = net::cmd_handler::execute_cmd(&mut ETH_DATA_BUFFER, bytes, laser, thermostat);
                    }
                }
            }
        } else {
            // Should reset, close all TCP sockets.
            let mut any_socket_alive = false;
            if net::net::eth_is_socket_active() {
                net::net::eth_close_socket();
                 any_socket_alive = true;
            }

            // Must let loop run for one more cycle to poll server for RST to be sent,
            // this makes sure system does not reset right after socket.abort() is called.
            if !any_socket_alive {
                SCB::sys_reset();
            }  
        }
    }
}