ethernet peripheral ownership, cs

This commit is contained in:
Robert Jördens 2019-05-06 17:33:42 +00:00
parent bdb6955aa1
commit ef18eb38ca
2 changed files with 221 additions and 250 deletions

View File

@ -1,5 +1,4 @@
use core::{slice, cmp};
use cortex_m;
use stm32h7::stm32h7x3 as stm32;
use smoltcp::Result;
use smoltcp::time::Instant;
@ -141,48 +140,40 @@ pub fn setup_pins(gpioa: &stm32::GPIOA, gpiob: &stm32::GPIOB,
const PHY_ADDR: u8 = 0;
fn phy_read(reg_addr: u8) -> u16 {
cortex_m::interrupt::free(|_cs| {
let mac = unsafe { &*stm32::ETHERNET_MAC::ptr() };
while mac.macmdioar.read().mb().bit_is_set() {}
mac.macmdioar.modify(|_, w| unsafe {
w
.pa().bits(PHY_ADDR)
.rda().bits(reg_addr)
.goc().bits(0b11) // read
.cr().bits(CLOCK_RANGE)
.mb().set_bit()
});
while mac.macmdioar.read().mb().bit_is_set() {}
mac.macmdiodr.read().md().bits()
})
fn phy_read(reg_addr: u8, mac: &stm32::ETHERNET_MAC) -> u16 {
while mac.macmdioar.read().mb().bit_is_set() {}
mac.macmdioar.modify(|_, w| unsafe {
w
.pa().bits(PHY_ADDR)
.rda().bits(reg_addr)
.goc().bits(0b11) // read
.cr().bits(CLOCK_RANGE)
.mb().set_bit()
});
while mac.macmdioar.read().mb().bit_is_set() {}
mac.macmdiodr.read().md().bits()
}
fn phy_write(reg_addr: u8, reg_data: u16) {
cortex_m::interrupt::free(|_cs| {
let mac = unsafe { &*stm32::ETHERNET_MAC::ptr() };
while mac.macmdioar.read().mb().bit_is_set() {}
mac.macmdiodr.write(|w| unsafe { w.md().bits(reg_data) });
mac.macmdioar.modify(|_, w| unsafe {
w
.pa().bits(PHY_ADDR)
.rda().bits(reg_addr)
.goc().bits(0b01) // write
.cr().bits(CLOCK_RANGE)
.mb().set_bit()
});
while mac.macmdioar.read().mb().bit_is_set() {}
})
fn phy_write(reg_addr: u8, reg_data: u16, mac: &stm32::ETHERNET_MAC) {
while mac.macmdioar.read().mb().bit_is_set() {}
mac.macmdiodr.write(|w| unsafe { w.md().bits(reg_data) });
mac.macmdioar.modify(|_, w| unsafe {
w
.pa().bits(PHY_ADDR)
.rda().bits(reg_addr)
.goc().bits(0b01) // write
.cr().bits(CLOCK_RANGE)
.mb().set_bit()
});
while mac.macmdioar.read().mb().bit_is_set() {}
}
// Writes a value to an extended PHY register in MMD address space
fn phy_write_ext(reg_addr: u16, reg_data: u16) {
phy_write(PHY_REG_CTL, 0x0003); // set address
phy_write(PHY_REG_ADDAR, reg_addr);
phy_write(PHY_REG_CTL, 0x4003); // set data
phy_write(PHY_REG_ADDAR, reg_data);
fn phy_write_ext(reg_addr: u16, reg_data: u16, mac: &stm32::ETHERNET_MAC) {
phy_write(PHY_REG_CTL, 0x0003, mac); // set address
phy_write(PHY_REG_ADDAR, reg_addr, mac);
phy_write(PHY_REG_CTL, 0x4003, mac); // set data
phy_write(PHY_REG_ADDAR, reg_data, mac);
}
#[repr(align(4))]
@ -201,7 +192,7 @@ impl RxRing {
}
}
fn init(&mut self) {
unsafe fn init(&mut self, dma: &stm32::ETHERNET_DMA) {
assert_eq!(self.desc_buf[0].len() % 4, 0);
assert_eq!(self.pkt_buf[0].len() % 4, 0);
@ -214,17 +205,10 @@ impl RxRing {
}
}
cortex_m::interrupt::free(|_cs| unsafe {
let dma = &*stm32::ETHERNET_DMA::ptr();
dma.dmacrx_dlar.write(|w| {
w.bits(&self.desc_buf as *const _ as u32)
});
dma.dmacrx_rlr.write(|w| {
w.rdrl().bits(self.desc_buf.len() as u16 - 1)
});
});
let addr = &self.desc_buf as *const _ as u32;
assert_eq!(addr & 0x3, 0);
dma.dmacrx_dlar.write(|w| w.bits(addr));
dma.dmacrx_rlr.write(|w| w.rdrl().bits(self.desc_buf.len() as u16 - 1));
self.cur_desc = 0;
for _ in 0..self.desc_buf.len() {
@ -259,11 +243,10 @@ impl RxRing {
self.desc_buf[self.cur_desc][0] = addr as u32 & EMAC_DES0_BUF1AP;
self.desc_buf[self.cur_desc][3] = EMAC_RDES3_BUF1V | EMAC_RDES3_IOC | EMAC_DES3_OWN;
let addr = &self.desc_buf[self.cur_desc] as *const _;
cortex_m::interrupt::free(|_cs| {
let dma = unsafe { &*stm32::ETHERNET_DMA::ptr() };
dma.dmacrx_dtpr.write(|w| unsafe { w.bits(addr as u32) });
});
let addr = &self.desc_buf[self.cur_desc] as *const _ as u32;
assert_eq!(addr & 0x3, 0);
let dma = unsafe { stm32::Peripherals::steal().ETHERNET_DMA };
dma.dmacrx_dtpr.write(|w| unsafe { w.bits(addr) });
self.cur_desc = self.next_desc();
}
@ -285,7 +268,7 @@ impl TxRing {
}
}
fn init(&mut self) {
unsafe fn init(&mut self, dma: &stm32::ETHERNET_DMA) {
assert_eq!(self.desc_buf[0].len() % 4, 0);
assert_eq!(self.pkt_buf[0].len() % 4, 0);
@ -299,21 +282,13 @@ impl TxRing {
}
self.cur_desc = 0;
cortex_m::interrupt::free(|_cs| unsafe {
let dma = &*stm32::ETHERNET_DMA::ptr();
dma.dmactx_dlar.write(|w| {
w.bits(&self.desc_buf as *const _ as u32)
});
dma.dmactx_rlr.write(|w| {
w.tdrl().bits(self.desc_buf.len() as u16 - 1)
});
dma.dmactx_dtpr.write(|w| {
w.bits(&self.desc_buf[0] as *const _ as u32)
});
});
let addr = &self.desc_buf as *const _ as u32;
assert_eq!(addr & 0x3, 0);
dma.dmactx_dlar.write(|w| w.bits(addr));
dma.dmactx_rlr.write(|w| w.tdrl().bits(self.desc_buf.len() as u16 - 1));
let addr = &self.desc_buf[0] as *const _ as u32;
assert_eq!(addr & 0x3, 0);
dma.dmactx_dtpr.write(|w| w.bits(addr));
}
fn next_desc(&self) -> usize {
@ -337,11 +312,10 @@ impl TxRing {
self.desc_buf[self.cur_desc][3] = EMAC_DES3_OWN | EMAC_DES3_FD | EMAC_DES3_LD;
self.cur_desc = self.next_desc();
let addr = &self.desc_buf[self.cur_desc] as *const _;
cortex_m::interrupt::free(|_cs| {
let dma = unsafe { &*stm32::ETHERNET_DMA::ptr() };
dma.dmactx_dtpr.write(|w| unsafe { w.bits(addr as u32) });
});
let addr = &self.desc_buf[self.cur_desc] as *const _ as u32;
assert_eq!(addr & 0x3, 0);
let dma = unsafe { stm32::Peripherals::steal().ETHERNET_DMA };
dma.dmactx_dtpr.write(|w| unsafe { w.bits(addr) });
}
}
@ -356,176 +330,174 @@ impl Device {
}
// After `init` is called, `Device` shall not be moved.
pub unsafe fn init(&mut self, mac: EthernetAddress) {
cortex_m::interrupt::free(|_cs| {
let eth_mac = &*stm32::ETHERNET_MAC::ptr();
let eth_dma = &*stm32::ETHERNET_DMA::ptr();
let eth_mtl = &*stm32::ETHERNET_MTL::ptr();
pub unsafe fn init(&mut self, mac: EthernetAddress,
eth_mac: &stm32::ETHERNET_MAC,
eth_dma: &stm32::ETHERNET_DMA,
eth_mtl: &stm32::ETHERNET_MTL,
) {
eth_dma.dmamr.modify(|_, w| w.swr().set_bit());
while eth_dma.dmamr.read().swr().bit_is_set() {}
eth_dma.dmamr.modify(|_, w| w.swr().set_bit());
while eth_dma.dmamr.read().swr().bit_is_set() {}
// 200 MHz
eth_mac.mac1ustcr.modify(|_, w| w.tic_1us_cntr().bits(200 - 1));
// 200 MHz
eth_mac.mac1ustcr.modify(|_, w| w.tic_1us_cntr().bits(200 - 1));
// Configuration Register
eth_mac.maccr.modify(|_, w| {
w
.arpen().clear_bit()
.ipc().set_bit()
.ipg().bits(0b000) // 96 bit
.ecrsfd().clear_bit()
.dcrs().clear_bit()
.bl().bits(0b00) // 19
.prelen().bits(0b00) // 7
// CRC stripping for Type frames
.cst().set_bit()
// Fast Ethernet speed
.fes().set_bit()
// Duplex mode
.dm().set_bit()
// Automatic pad/CRC stripping
.acs().set_bit()
// Retry disable in half-duplex mode
.dr().set_bit()
});
eth_mac.macecr.modify(|_, w| {
w
.eipgen().clear_bit()
.usp().clear_bit()
.spen().clear_bit()
.dcrcc().clear_bit()
});
// Set the MAC address
eth_mac.maca0lr.write(|w|
w.addrlo().bits( u32::from(mac.0[0]) |
(u32::from(mac.0[1]) << 8) |
(u32::from(mac.0[2]) << 16) |
(u32::from(mac.0[3]) << 24))
);
eth_mac.maca0hr.write(|w|
w.addrhi().bits( u16::from(mac.0[4]) |
(u16::from(mac.0[5]) << 8))
);
// frame filter register
eth_mac.macpfr.modify(|_, w| {
w
.dntu().clear_bit()
.ipfe().clear_bit()
.vtfe().clear_bit()
.hpf().clear_bit()
.saf().clear_bit()
.saif().clear_bit()
.pcf().bits(0b00)
.dbf().clear_bit()
.pm().clear_bit()
.daif().clear_bit()
.hmc().clear_bit()
.huc().clear_bit()
// Receive All
.ra().clear_bit()
// Promiscuous mode
.pr().clear_bit()
});
eth_mac.macwtr.write(|w| w.pwe().clear_bit());
// Flow Control Register
eth_mac.macqtx_fcr.modify(|_, w| {
// Pause time
w.pt().bits(0x100)
});
eth_mac.macrx_fcr.modify(|_, w| w);
eth_mtl.mtlrx_qomr.modify(|_, w|
w
// Receive store and forward
.rsf().set_bit()
// Dropping of TCP/IP checksum error frames disable
.dis_tcp_ef().clear_bit()
// Forward error frames
.fep().clear_bit()
// Forward undersized good packets
.fup().clear_bit()
);
eth_mtl.mtltx_qomr.modify(|_, w| {
w
// Transmit store and forward
.tsf().set_bit()
});
if (phy_read(PHY_REG_ID1) != 0x0007) | (phy_read(PHY_REG_ID2) != 0xC131) {
error!("PHY ID error!");
}
phy_write(PHY_REG_BCR, PHY_REG_BCR_RESET);
while phy_read(PHY_REG_BCR) & PHY_REG_BCR_RESET == PHY_REG_BCR_RESET {};
phy_write_ext(PHY_REG_WUCSR, 0);
phy_write(PHY_REG_BCR, PHY_REG_BCR_AN | PHY_REG_BCR_ANRST | PHY_REG_BCR_100M);
/*
while phy_read(PHY_REG_BSR) & PHY_REG_BSR_UP == 0 {};
while phy_read(PHY_REG_BSR) & PHY_REG_BSR_ANDONE == 0 {};
while phy_read(PHY_REG_SSR) & (PHY_REG_SSR_ANDONE | PHY_REG_SSR_SPEED)
!= PHY_REG_SSR_ANDONE | PHY_REG_SSR_100BASE_FD {};
*/
// operation mode register
eth_dma.dmamr.modify(|_, w| {
w
.intm().bits(0b00)
// Rx Tx priority ratio 1:1
.pr().bits(0b000)
.txpr().clear_bit()
.da().clear_bit()
});
// bus mode register
eth_dma.dmasbmr.modify(|_, w| {
// Address-aligned beats
w.aal().set_bit()
// Fixed burst
.fb().set_bit()
});
eth_dma.dmaccr.modify(|_, w| {
w
.dsl().bits(0)
.pblx8().clear_bit()
.mss().bits(536)
});
eth_dma.dmactx_cr.modify(|_, w| {
w
// Tx DMA PBL
.txpbl().bits(32)
.tse().clear_bit()
// Operate on second frame
.osf().clear_bit()
});
eth_dma.dmacrx_cr.modify(|_, w| {
w
// receive buffer size
.rbsz().bits(ETH_BUFFER_SIZE as u16)
// Rx DMA PBL
.rxpbl().bits(32)
// Disable flushing of received frames
.rpf().clear_bit()
});
self.rx.init();
self.tx.init();
// Manage MAC transmission and reception
eth_mac.maccr.modify(|_, w| {
w.re().bit(true) // Receiver Enable
.te().bit(true) // Transmiter Enable
});
eth_mtl.mtltx_qomr.modify(|_, w| w.ftq().set_bit());
// Manage DMA transmission and reception
eth_dma.dmactx_cr.modify(|_, w| w.st().set_bit());
eth_dma.dmacrx_cr.modify(|_, w| w.sr().set_bit());
eth_dma.dmacsr.modify(|_, w|
w.tps().set_bit()
.rps().set_bit()
);
// Configuration Register
eth_mac.maccr.modify(|_, w| {
w
.arpen().clear_bit()
.ipc().set_bit()
.ipg().bits(0b000) // 96 bit
.ecrsfd().clear_bit()
.dcrs().clear_bit()
.bl().bits(0b00) // 19
.prelen().bits(0b00) // 7
// CRC stripping for Type frames
.cst().set_bit()
// Fast Ethernet speed
.fes().set_bit()
// Duplex mode
.dm().set_bit()
// Automatic pad/CRC stripping
.acs().set_bit()
// Retry disable in half-duplex mode
.dr().set_bit()
});
eth_mac.macecr.modify(|_, w| {
w
.eipgen().clear_bit()
.usp().clear_bit()
.spen().clear_bit()
.dcrcc().clear_bit()
});
// Set the MAC address
eth_mac.maca0lr.write(|w|
w.addrlo().bits( u32::from(mac.0[0]) |
(u32::from(mac.0[1]) << 8) |
(u32::from(mac.0[2]) << 16) |
(u32::from(mac.0[3]) << 24))
);
eth_mac.maca0hr.write(|w|
w.addrhi().bits( u16::from(mac.0[4]) |
(u16::from(mac.0[5]) << 8))
);
// frame filter register
eth_mac.macpfr.modify(|_, w| {
w
.dntu().clear_bit()
.ipfe().clear_bit()
.vtfe().clear_bit()
.hpf().clear_bit()
.saf().clear_bit()
.saif().clear_bit()
.pcf().bits(0b00)
.dbf().clear_bit()
.pm().clear_bit()
.daif().clear_bit()
.hmc().clear_bit()
.huc().clear_bit()
// Receive All
.ra().clear_bit()
// Promiscuous mode
.pr().clear_bit()
});
eth_mac.macwtr.write(|w| w.pwe().clear_bit());
// Flow Control Register
eth_mac.macqtx_fcr.modify(|_, w| {
// Pause time
w.pt().bits(0x100)
});
eth_mac.macrx_fcr.modify(|_, w| w);
eth_mtl.mtlrx_qomr.modify(|_, w|
w
// Receive store and forward
.rsf().set_bit()
// Dropping of TCP/IP checksum error frames disable
.dis_tcp_ef().clear_bit()
// Forward error frames
.fep().clear_bit()
// Forward undersized good packets
.fup().clear_bit()
);
eth_mtl.mtltx_qomr.modify(|_, w| {
w
// Transmit store and forward
.tsf().set_bit()
});
if (phy_read(PHY_REG_ID1, eth_mac) != 0x0007) | (phy_read(PHY_REG_ID2, eth_mac) != 0xC131) {
error!("PHY ID error!");
}
phy_write(PHY_REG_BCR, PHY_REG_BCR_RESET, eth_mac);
while phy_read(PHY_REG_BCR, eth_mac) & PHY_REG_BCR_RESET == PHY_REG_BCR_RESET {};
phy_write_ext(PHY_REG_WUCSR, 0, eth_mac);
phy_write(PHY_REG_BCR, PHY_REG_BCR_AN | PHY_REG_BCR_ANRST | PHY_REG_BCR_100M, eth_mac);
/*
while phy_read(PHY_REG_BSR) & PHY_REG_BSR_UP == 0 {};
while phy_read(PHY_REG_BSR) & PHY_REG_BSR_ANDONE == 0 {};
while phy_read(PHY_REG_SSR) & (PHY_REG_SSR_ANDONE | PHY_REG_SSR_SPEED)
!= PHY_REG_SSR_ANDONE | PHY_REG_SSR_100BASE_FD {};
*/
// operation mode register
eth_dma.dmamr.modify(|_, w| {
w
.intm().bits(0b00)
// Rx Tx priority ratio 1:1
.pr().bits(0b000)
.txpr().clear_bit()
.da().clear_bit()
});
// bus mode register
eth_dma.dmasbmr.modify(|_, w| {
// Address-aligned beats
w.aal().set_bit()
// Fixed burst
.fb().set_bit()
});
eth_dma.dmaccr.modify(|_, w| {
w
.dsl().bits(0)
.pblx8().clear_bit()
.mss().bits(536)
});
eth_dma.dmactx_cr.modify(|_, w| {
w
// Tx DMA PBL
.txpbl().bits(32)
.tse().clear_bit()
// Operate on second frame
.osf().clear_bit()
});
eth_dma.dmacrx_cr.modify(|_, w| {
w
// receive buffer size
.rbsz().bits(ETH_BUFFER_SIZE as u16)
// Rx DMA PBL
.rxpbl().bits(32)
// Disable flushing of received frames
.rpf().clear_bit()
});
self.rx.init(eth_dma);
self.tx.init(eth_dma);
// Manage MAC transmission and reception
eth_mac.maccr.modify(|_, w| {
w.re().bit(true) // Receiver Enable
.te().bit(true) // Transmiter Enable
});
eth_mtl.mtltx_qomr.modify(|_, w| w.ftq().set_bit());
// Manage DMA transmission and reception
eth_dma.dmactx_cr.modify(|_, w| w.st().set_bit());
eth_dma.dmacrx_cr.modify(|_, w| w.sr().set_bit());
eth_dma.dmacsr.modify(|_, w|
w.tps().set_bit()
.rps().set_bit()
);
}
}
@ -586,8 +558,7 @@ impl<'a> phy::TxToken for TxToken<'a> {
}
}
pub unsafe fn interrupt_handler() {
let eth_dma = &*stm32::ETHERNET_DMA::ptr();
pub unsafe fn interrupt_handler(eth_dma: &stm32::ETHERNET_DMA) {
eth_dma.dmacsr.write(|w|
w
.nis().set_bit()
@ -596,8 +567,7 @@ pub unsafe fn interrupt_handler() {
);
}
pub unsafe fn enable_interrupt() {
let eth_dma = &*stm32::ETHERNET_DMA::ptr();
pub unsafe fn enable_interrupt(eth_dma: &stm32::ETHERNET_DMA) {
eth_dma.dmacier.modify(|_, w|
w
.nie().set_bit()

View File

@ -612,7 +612,7 @@ fn main() -> ! {
let device = unsafe { &mut ETHERNET };
let hardware_addr = net::wire::EthernetAddress([0x10, 0xE2, 0xD5, 0x00, 0x03, 0x00]);
unsafe { device.init(hardware_addr) };
unsafe { device.init(hardware_addr, &dp.ETHERNET_MAC, &dp.ETHERNET_DMA, &dp.ETHERNET_MTL) };
let mut neighbor_cache_storage = [None; 8];
let neighbor_cache = net::iface::NeighborCache::new(&mut neighbor_cache_storage[..]);
let local_addr = net::wire::IpAddress::v4(10, 0, 16, 99);
@ -626,7 +626,7 @@ fn main() -> ! {
let mut sockets = net::socket::SocketSet::new(&mut socket_set_entries[..]);
create_socket!(sockets, tcp_rx_storage0, tcp_tx_storage0, tcp_handle0);
unsafe { eth::enable_interrupt(); }
unsafe { eth::enable_interrupt(&dp.ETHERNET_DMA); }
unsafe { cp.NVIC.set_priority(stm32::Interrupt::ETH, 196); } // mid prio
cp.NVIC.enable(stm32::Interrupt::ETH);
@ -715,8 +715,9 @@ fn SPI1() {
#[interrupt]
fn ETH() {
let dma = unsafe { &stm32::Peripherals::steal().ETHERNET_DMA };
ETHERNET_PENDING.store(true, Ordering::Relaxed);
unsafe { eth::interrupt_handler() }
unsafe { eth::interrupt_handler(dma) }
}
#[exception]